3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMKL27Z128VLH4
NXP Semicon · Pre-ordered MCUs · LQFP-64(10x10)
MKL27Z128VLH4 from NXP Semicon, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTE0 | bidirectional | Port E GPIO; default function PTE0/CLKOUT32K, other listed functions SPI1_MISO, LPUART1_TX, RTC_CLKOUT, CMP0_OUT, I2C1_SDA. |
| 2 | PTE1 | bidirectional | Port E GPIO; default function DISABLED, other listed functions PTE1, SPI1_MOSI, LPUART1_RX, SPI1_MISO, I2C1_SCL. |
| 3 | VDD | power_in | Digital supply pin; the device voltage range is 1.71 to 3.6 V. |
| 4 | VSS | power_in | Digital ground pin. |
| 5 | USB0_DP | bidirectional | USB full-speed 2.0 device D+ data line. |
| 6 | USB0_DM | bidirectional | USB full-speed 2.0 device D- data line. |
| 7 | VOUT33 | power_out | 3.3 V output of the USB voltage regulator (USB VREG). |
| 8 | VREGIN | power_in | Input supply pin for the USB voltage regulator. |
| 9 | PTE20 | bidirectional | Port E GPIO; default function ADC0_DP0/ADC0_SE0, other listed functions PTE20, TPM1_CH0, LPUART0_TX, FXIO0_D4. |
| 10 | PTE21 | bidirectional | Port E GPIO; default function ADC0_DM0/ADC0_SE4a, other listed functions PTE21, TPM1_CH1, LPUART0_RX, FXIO0_D5. |
| 11 | PTE22 | bidirectional | Port E GPIO; default function ADC0_DP3/ADC0_SE3, other listed functions PTE22, TPM2_CH0, UART2_TX, FXIO0_D6. |
| 12 | PTE23 | bidirectional | Port E GPIO; default function ADC0_DM3/ADC0_SE7a, other listed functions PTE23, TPM2_CH1, UART2_RX, FXIO0_D7. |
| 13 | VDDA | power_in | Analog supply pin for the analog modules. |
| 14 | VREFH | power_in | High-side voltage reference input; can act as VREF_OUT when the VREFV1 module is enabled. |
| 15 | VREFL | power_in | Low-side voltage reference input. |
| 16 | VSSA | power_in | Analog ground pin. |
| 17 | PTE29 | bidirectional | Port E GPIO; default function CMP0_IN5/ADC0_SE4b, other listed functions PTE29, TPM0_CH2, TPM_CLKIN0. |
| 18 | PTE30 | bidirectional | Port E GPIO; default function DAC0_OUT/ADC0_SE23/CMP0_IN4, other listed functions PTE30, TPM0_CH3, TPM_CLKIN1, LPUART1_TX, LPTMR0_ALT1. |
| 19 | PTE31 | bidirectional | Port E GPIO; default function DISABLED, other listed functions PTE31, TPM0_CH4. |
| 20 | PTE24 | bidirectional | Port E GPIO; default function DISABLED, other listed functions PTE24, TPM0_CH0, I2C0_SCL. |
| 21 | PTE25 | bidirectional | Port E GPIO; default function DISABLED, other listed functions PTE25, TPM0_CH1, I2C0_SDA. |
| 22 | PTA0 | bidirectional | Port A GPIO; default function SWD_CLK (serial wire debug clock), other listed functions PTA0, TPM0_CH5. |
| 23 | PTA1 | bidirectional | Port A GPIO; default function DISABLED, other listed functions PTA1, LPUART0_RX, TPM2_CH0. |
| 24 | PTA2 | bidirectional | Port A GPIO; default function DISABLED, other listed functions PTA2, LPUART0_TX, TPM2_CH1. |
| 25 | PTA3 | bidirectional | Port A GPIO; default function SWD_DIO (serial wire debug data), other listed functions PTA3, I2C1_SCL, TPM0_CH0. |
| 26 | PTA4 | bidirectional | Port A GPIO; default function NMI_b (non-maskable interrupt), other listed functions PTA4, I2C1_SDA, TPM0_CH1. |
| 27 | PTA5 | bidirectional | Port A GPIO; default function DISABLED, other listed functions PTA5, USB_CLKIN, TPM0_CH2, I2S0_TX_BCLK. |
| 28 | PTA12 | bidirectional | Port A GPIO; default function DISABLED, other listed functions PTA12, TPM1_CH0, I2S0_TXD0. |
| 29 | PTA13 | bidirectional | Port A GPIO; default function DISABLED, other listed functions PTA13, TPM1_CH1, I2S0_TX_FS. |
| 30 | VDD | power_in | Digital supply pin; the device voltage range is 1.71 to 3.6 V. |
| 31 | VSS | power_in | Digital ground pin. |
| 32 | PTA18 | bidirectional | Port A GPIO; default function EXTAL0 (crystal oscillator input), other listed functions PTA18, LPUART1_RX, TPM_CLKIN0. |
| 33 | PTA19 | bidirectional | Port A GPIO; default function XTAL0 (crystal oscillator output), other listed functions PTA19, LPUART1_TX, TPM_CLKIN1, LPTMR0_ALT1. |
| 34 | PTA20 | input | Port A GPIO; default function RESET_b (external reset input), other listed function PTA20. |
| 35 | PTB0 | bidirectional | Port B GPIO with wakeup function LLWU_P5; default function PTB0/LLWU_P5, other listed functions ADC0_SE8, I2C0_SCL, TPM1_CH0. |
| 36 | PTB1 | bidirectional | Port B GPIO; default function ADC0_SE9, other listed functions PTB1, I2C0_SDA, TPM1_CH1. |
| 37 | PTB2 | bidirectional | Port B GPIO; default function ADC0_SE12, other listed functions PTB2, I2C0_SCL, TPM2_CH0. |
| 38 | PTB3 | bidirectional | Port B GPIO; default function ADC0_SE13, other listed functions PTB3, I2C0_SDA, TPM2_CH1. |
| 39 | PTB16 | bidirectional | Port B GPIO; default function DISABLED, other listed functions PTB16, SPI1_MOSI, LPUART0_RX, TPM_CLKIN0, SPI1_MISO. |
| 40 | PTB17 | bidirectional | Port B GPIO; default function DISABLED, other listed functions PTB17, SPI1_MISO, LPUART0_TX, TPM_CLKIN1, SPI1_MOSI. |
| 41 | PTB18 | bidirectional | Port B GPIO; default function DISABLED, other listed functions PTB18, TPM2_CH0, I2S0_TX_BCLK. |
| 42 | PTB19 | bidirectional | Port B GPIO; default function DISABLED, other listed functions PTB19, TPM2_CH1, I2S0_TX_FS. |
| 43 | PTC0 | bidirectional | Port C GPIO; default function ADC0_SE14, other listed functions PTC0, EXTRG_IN, audioUSB_SOF_OUT, CMP0_OUT, I2S0_TXD0. |
| 44 | PTC1 | bidirectional | Port C GPIO with wakeup function LLWU_P6 and RTC clock input; default function ADC0_SE15, other listed functions PTC1/LLWU_P6/RTC_CLKIN, I2C1_SCL, TPM0_CH0, I2S0_TXD0. |
| 45 | PTC2 | bidirectional | Port C GPIO; default function ADC0_SE11, other listed functions PTC2, I2C1_SDA, TPM0_CH1, I2S0_TX_FS. |
| 46 | PTC3 | bidirectional | Port C GPIO with wakeup function LLWU_P7; default function DISABLED, other listed functions PTC3/LLWU_P7, SPI1_SCK, LPUART1_RX, TPM0_CH2, CLKOUT, I2S0_TX_BCLK. |
| 47 | VSS | power_in | Digital ground pin. |
| 48 | VDD | power_in | Digital supply pin; the device voltage range is 1.71 to 3.6 V. |
| 49 | PTC4 | bidirectional | Port C GPIO with wakeup function LLWU_P8; default function DISABLED, other listed functions PTC4/LLWU_P8, SPI0_SS, LPUART1_TX, TPM0_CH3, I2S0_MCLK. |
| 50 | PTC5 | bidirectional | Port C GPIO with wakeup function LLWU_P9; default function DISABLED, other listed functions PTC5/LLWU_P9, SPI0_SCK, LPTMR0_ALT2, I2S0_RXD0, CMP0_OUT. |
| 51 | PTC6 | bidirectional | Port C GPIO with wakeup function LLWU_P10; default function CMP0_IN0, other listed functions PTC6/LLWU_P10, SPI0_MOSI, EXTRG_IN, I2S0_RX_BCLK, SPI0_MISO, I2S0_MCLK. |
| 52 | PTC7 | bidirectional | Port C GPIO; default function CMP0_IN1, other listed functions PTC7, SPI0_MISO, audioUSB_SOF_OUT, I2S0_RX_FS, SPI0_MOSI. |
| 53 | PTC8 | bidirectional | Port C GPIO; default function CMP0_IN2, other listed functions PTC8, I2C0_SCL, TPM0_CH4, I2S0_MCLK. |
| 54 | PTC9 | bidirectional | Port C GPIO; default function CMP0_IN3, other listed functions PTC9, I2C0_SDA, TPM0_CH5, I2S0_RX_BCLK. |
| 55 | PTC10 | bidirectional | Port C GPIO; default function DISABLED, other listed functions PTC10, I2C1_SCL, I2S0_RX_FS. |
| 56 | PTC11 | bidirectional | Port C GPIO; default function DISABLED, other listed functions PTC11, I2C1_SDA, I2S0_RXD0. |
| 57 | PTD0 | bidirectional | Port D GPIO; default function DISABLED, other listed functions PTD0, SPI0_SS, TPM0_CH0, FXIO0_D0. |
| 58 | PTD1 | bidirectional | Port D GPIO; default function ADC0_SE5b, other listed functions PTD1, SPI0_SCK, TPM0_CH1, FXIO0_D1. |
| 59 | PTD2 | bidirectional | Port D GPIO; default function DISABLED, other listed functions PTD2, SPI0_MOSI, UART2_RX, TPM0_CH2, SPI0_MISO, FXIO0_D2. |
| 60 | PTD3 | bidirectional | Port D GPIO; default function DISABLED, other listed functions PTD3, SPI0_MISO, UART2_TX, TPM0_CH3, SPI0_MOSI, FXIO0_D3. |
| 61 | PTD4 | bidirectional | Port D GPIO with wakeup function LLWU_P14; default function DISABLED, other listed functions PTD4/LLWU_P14, SPI1_SS, UART2_RX, TPM0_CH4, FXIO0_D4. |
| 62 | PTD5 | bidirectional | Port D GPIO; default function ADC0_SE6b, other listed functions PTD5, SPI1_SCK, UART2_TX, TPM0_CH5, FXIO0_D5. |
| 63 | PTD6 | bidirectional | Port D GPIO with wakeup function LLWU_P15; default function ADC0_SE7b, other listed functions PTD6/LLWU_P15, SPI1_MOSI, LPUART0_RX, SPI1_MISO, FXIO0_D6. |
| 64 | PTD7 | bidirectional | Port D GPIO; default function DISABLED, other listed functions PTD7, SPI1_MISO, LPUART0_TX, SPI1_MOSI, FXIO0_D7. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | TSTG | -55 | 150 | °C | 5 | ||
| Solder temperature, lead-free | TSDR | 260 | °C | 5 | |||
| Electrostatic discharge voltage, human body model | VHBM | -2000 | 2000 | V | 5 | ||
| Electrostatic discharge voltage, charged-device model | VCDM | -500 | 500 | V | 5 | ||
| Latch-up current | ILAT | -100 | 100 | mA | at ambient temperature of 105 °C | 5 | |
| Digital supply voltage | VDD | -0.3 | 3.8 | V | 6 | ||
| Digital supply current | IDD | 120 | mA | 6 | |||
| Instantaneous maximum current single pin limit (applies to all port pins) | ID | -25 | 25 | mA | 6 | ||
| USB_DP input voltage | VUSB_DP | -0.3 | 3.63 | V | 6 | ||
| USB_DM input voltage | VUSB_DM | -0.3 | 3.63 | V | 6 | ||
| USB regulator input | VREGIN | -0.3 | 6 | V | 6 | ||
| Temperature range | -40 | 105 | °C | 2 | |||
| Flash write voltage range | 1.71 | 3.6 | V | 2 | |||
| Supply voltage | VDD | 1.71 | 3.6 | V | 7 | ||
| Analog supply voltage | VDDA | 1.71 | 3.6 | V | 7 | ||
| VDD-to-VDDA differential voltage | VDD, VDDA | -0.1 | 0.1 | V | 7 | ||
| VSS-to-VSSA differential voltage | VSS, VSSA | -0.1 | 0.1 | V | 7 | ||
| IO pin negative DC injection current, single pin | IICIO | -3 | mA | VIN < VSS-0.3V | 7 | ||
| Contiguous pin DC injection current, regional limit | IICcont | -25 | mA | Negative current injection; includes sum of negative injection currents of 16 contiguous pins | 7 | ||
| VDD voltage required to retain RAM | VRAM | 1.2 | V | 7 | |||
| Falling VDD POR detect voltage | VPOR | 0.8 | 1.1 | 1.5 | V | 7 | |
| Supply voltage delta to VDD | ΔVDDA | -100 | 0 | 100 | mV | Delta to VDD (VDD, VDDA) | 32 |
| Ground voltage delta to VSS | ΔVSSA | -100 | 0 | 100 | mV | Delta to VSS (VSS, VSSA) | 32 |
| ADC reference voltage high | VREFH | 1.13 | V | 32 | |||
| Input capacitance | CADIN | 8 | 10 | pF | 16-bit mode | 32 | |
| Input capacitance | CADIN | 4 | 5 | pF | 8-bit / 10-bit / 12-bit modes | 32 | |
| Input series resistance | RADIN | 2 | 5 | kΩ | 32 | ||
| Analog source resistance (external) | RAS | 5 | kΩ | 13-bit / 12-bit modes, fADCK < 4 MHz | 32 | ||
| ADC conversion clock frequency | fADCK | 1 | 24 | MHz | ≤ 13-bit mode | 32 | |
| ADC conversion clock frequency | fADCK | 2 | 12 | MHz | 16-bit mode | 32 | |
| ADC conversion rate | Crate | 20 | 1200 | ksps | ≤ 13-bit modes; no ADC hardware averaging; continuous conversions enabled | 32 | |
| ADC conversion rate | Crate | 37.037 | 461.467 | ksps | 16-bit mode; no ADC hardware averaging; continuous conversions enabled | 32 | |
| ADC supply current | IDDA_ADC | 0.215 | 1.7 | mA | 33 | ||
| ADC asynchronous clock source | fADACK | 1.2 | 3.9 | MHz | ADLPC = 1, ADHSC = 0 | 33 | |
| ADC asynchronous clock source | fADACK | 2.4 | 6.1 | MHz | ADLPC = 1, ADHSC = 1 | 33 | |
| ADC asynchronous clock source | fADACK | 3 | 7.3 | MHz | ADLPC = 0, ADHSC = 0 | 33 | |
| ADC asynchronous clock source | fADACK | 4.4 | 9.5 | MHz | ADLPC = 0, ADHSC = 1 | 33 | |
| Total unadjusted error | TUE | -6.8 | 6.8 | LSB | 12-bit modes | 33 | |
| Total unadjusted error | TUE | -2.1 | 2.1 | LSB | <12-bit modes | 33 | |
| Differential non-linearity | DNL | -1.1 | 1.9 | LSB | 12-bit modes | 33 | |
| Integral non-linearity | INL | -2.7 | 1.9 | LSB | 12-bit modes | 33 | |
| Temp sensor slope | 1.55 | 1.62 | 1.69 | mV/°C | Across the full temperature range of the device | 34 | |
| Temp sensor voltage | VTEMP25 | 706 | 716 | 726 | mV | 25 °C | 34 |
| Reference voltage | VDACR | 1.13 | 3.6 | V | 39 | ||
| Supply current, low-power mode | IDDA_DACLP | 250 | μA | low-power mode | 40 | ||
| Supply current, high-speed mode | IDDA_DACHP | 900 | μA | high-speed mode | 40 | ||
| Full-scale settling time (0x080 to 0xF7F), low-power mode | tDACLP | 100 | 200 | μs | low-power mode | 40 | |
| Supply current adder during high voltage flash programming operation | IDD_PGM | 2.5 | 6 | mA | 31 | ||
| Supply current adder during high voltage flash erase operation | IDD_ERS | 1.5 | 4 | mA | 31 | ||
| Data retention | tnvmretp10k | 5 | 50 | years | after up to 10 K cycles | 31 | |
| Data retention | tnvmretp1k | 20 | 100 | years | after up to 1 K cycles | 31 | |
| Cycling endurance | nnvmcycp | 10 | 50 | K cycles | 31 | ||
| Oscillator crystal or resonator frequency, low-frequency mode | fosc_lo | 32 | 40 | kHz | MCG_C2[RANGE]=00 | 29 | |
| Oscillator crystal or resonator frequency, high-frequency mode (low range) | fosc_hi_1 | 3 | 8 | MHz | MCG_C2[RANGE]=01 | 29 | |
| Oscillator crystal or resonator frequency, high-frequency mode (high range) | fosc_hi_2 | 8 | 32 | MHz | MCG_C2[RANGE]=1x | 29 | |
| Input supply voltage | VREGIN | 2.7 | 5.5 | V | 43 | ||
| Quiescent current, Run mode | IDDon | 125 | 186 | μA | Run mode, load current equal zero, input supply (VREGIN) > 3.6 V | 43 | |
| Maximum load current, Run mode | ILOADrun | 120 | mA | Run mode | 43 | ||
| Data setup time (inputs) | tSU | 18 | ns | SPI master mode, slew rate disabled pads | 44 | ||
| Data valid (after SPSCK edge) | tv | 15 | ns | SPI master mode, slew rate disabled pads | 44 |
CAD (KiCad official)
- Symbol:
MKL27Z128VLH4 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
mkl27z128vlh4-etched.step/mkl27z128vlh4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mkl27z128vlh4.step/mkl27z128vlh4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (67 pp, sha256
71c160185f0967a8, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).