main
Ray
Publish 0.1.0
5c549a6
MKL26Z256VLH4
NXP Semicon · Pre-ordered MCUs · LQFP-64(10x10)
MKL26Z256VLH4 from NXP Semicon, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTE0 | bidirectional | Port E GPIO bit 0 with default function DISABLED; alternate functions listed for this pin include SPI1_MISO, UART1_TX, RTC_CLKOUT, CMP0_OUT and I2C1_SDA. |
| 2 | PTE1 | bidirectional | Port E GPIO bit 1 with default function DISABLED; alternate functions listed for this pin include SPI1_MOSI, UART1_RX, SPI1_MISO and I2C1_SCL. |
| 3 | VDD | power_in | Digital supply pin (VDD). |
| 4 | VSS | power_in | Digital ground pin (VSS). |
| 5 | USB0_DP | bidirectional | USB full-/low-speed On-the-Go D+ data line of the on-chip USB transceiver. |
| 6 | USB0_DM | bidirectional | USB full-/low-speed On-the-Go D- data line of the on-chip USB transceiver. |
| 7 | VOUT33 | power_out | 3.3 V output of the on-chip 5 V to 3.3 V USB regulator. |
| 8 | VREGIN | power_in | Input supply to the on-chip 5 V to 3.3 V USB voltage regulator. |
| 9 | PTE20 | bidirectional | Port E GPIO bit 20 that also serves as ADC0_DP0/ADC0_SE0 analog input; alternates include TPM1_CH0 and UART0_TX. |
| 10 | PTE21 | bidirectional | Port E GPIO bit 21 that also serves as ADC0_DM0/ADC0_SE4a analog input; alternates include TPM1_CH1 and UART0_RX. |
| 11 | PTE22 | bidirectional | Port E GPIO bit 22 that also serves as ADC0_DP3/ADC0_SE3 analog input; alternates include TPM2_CH0 and UART2_TX. |
| 12 | PTE23 | bidirectional | Port E GPIO bit 23 that also serves as ADC0_DM3/ADC0_SE7a analog input; alternates include TPM2_CH1 and UART2_RX. |
| 13 | VDDA | power_in | Analog supply pin (VDDA). |
| 14 | VREFH | power_in | High-side voltage reference pin (VREFH). |
| 15 | VREFL | power_in | Low-side voltage reference pin (VREFL). |
| 16 | VSSA | power_in | Analog ground pin (VSSA). |
| 17 | PTE29 | bidirectional | Port E GPIO bit 29 that also serves as CMP0_IN5/ADC0_SE4b analog input; alternates include TPM0_CH2 and TPM_CLKIN0. |
| 18 | PTE30 | bidirectional | Port E GPIO bit 30 shared with DAC0_OUT, ADC0_SE23 and CMP0_IN4; alternates include TPM0_CH3 and TPM_CLKIN1. |
| 19 | PTE31 | bidirectional | Port E GPIO bit 31 with default function DISABLED; alternate function listed is TPM0_CH4. |
| 20 | PTE24 | bidirectional | Port E GPIO bit 24 with default function DISABLED; alternates include TPM0_CH0 and I2C0_SCL. |
| 21 | PTE25 | bidirectional | Port E GPIO bit 25 with default function DISABLED; alternates include TPM0_CH1 and I2C0_SDA. |
| 22 | PTA0 | bidirectional | Port A GPIO bit 0 whose default function is SWD_CLK (serial wire debug clock); alternates include TSI0_CH1 and TPM0_CH5. |
| 23 | PTA1 | bidirectional | Port A GPIO bit 1 with default function DISABLED; alternates include TSI0_CH2, UART0_RX and TPM2_CH0. |
| 24 | PTA2 | bidirectional | Port A GPIO bit 2 with default function DISABLED; alternates include TSI0_CH3, UART0_TX and TPM2_CH1. |
| 25 | PTA3 | bidirectional | Port A GPIO bit 3 whose default function is SWD_DIO (serial wire debug data); alternates include TSI0_CH4, I2C1_SCL and TPM0_CH0. |
| 26 | PTA4 | bidirectional | Port A GPIO bit 4 whose default function is NMI_b (non-maskable interrupt); alternates include TSI0_CH5, I2C1_SDA and TPM0_CH1. |
| 27 | PTA5 | bidirectional | Port A GPIO bit 5 with default function DISABLED; alternates include USB_CLKIN, TPM0_CH2 and I2S0_TX_BCLK. |
| 28 | PTA12 | bidirectional | Port A GPIO bit 12 with default function DISABLED; alternates include TPM1_CH0 and I2S0_TXD0. |
| 29 | PTA13 | bidirectional | Port A GPIO bit 13 with default function DISABLED; alternates include TPM1_CH1 and I2S0_TX_FS. |
| 30 | VDD | power_in | Digital supply pin (VDD). |
| 31 | VSS | power_in | Digital ground pin (VSS). |
| 32 | PTA18 | input | Crystal oscillator input pin (EXTAL0); the pin also carries PTA18, UART1_RX and TPM_CLKIN0 functions. |
| 33 | PTA19 | output | Crystal oscillator output pin (XTAL0); the pin also carries PTA19, UART1_TX, TPM_CLKIN1 and LPTMR0_ALT1 functions. |
| 34 | PTA20 | bidirectional | Pin whose default function is RESET_b (external reset); it is also Port A GPIO bit 20. |
| 35 | PTB0/LLWU_P5 | bidirectional | Port B GPIO bit 0 with LLWU_P5 wakeup input; also ADC0_SE8/TSI0_CH0 analog input, with alternates I2C0_SCL and TPM1_CH0. |
| 36 | PTB1 | bidirectional | Port B GPIO bit 1 that also serves as ADC0_SE9/TSI0_CH6 analog input; alternates include I2C0_SDA and TPM1_CH1. |
| 37 | PTB2 | bidirectional | Port B GPIO bit 2 that also serves as ADC0_SE12/TSI0_CH7 analog input; alternates include I2C0_SCL and TPM2_CH0. |
| 38 | PTB3 | bidirectional | Port B GPIO bit 3 that also serves as ADC0_SE13/TSI0_CH8 analog input; alternates include I2C0_SDA and TPM2_CH1. |
| 39 | PTB16 | bidirectional | Port B GPIO bit 16 that also serves as TSI0_CH9; alternates include SPI1_MOSI, UART0_RX, TPM_CLKIN0 and SPI1_MISO. |
| 40 | PTB17 | bidirectional | Port B GPIO bit 17 that also serves as TSI0_CH10; alternates include SPI1_MISO, UART0_TX, TPM_CLKIN1 and SPI1_MOSI. |
| 41 | PTB18 | bidirectional | Port B GPIO bit 18 that also serves as TSI0_CH11; alternates include TPM2_CH0 and I2S0_TX_BCLK. |
| 42 | PTB19 | bidirectional | Port B GPIO bit 19 that also serves as TSI0_CH12; alternates include TPM2_CH1 and I2S0_TX_FS. |
| 43 | PTC0 | bidirectional | Port C GPIO bit 0 that also serves as ADC0_SE14/TSI0_CH13 analog input; alternates include EXTRG_IN, audioUSB_SOF_OUT, CMP0_OUT and I2S0_TXD0. |
| 44 | PTC1/LLWU_P6/RTC_CLKIN | bidirectional | Port C GPIO bit 1 with LLWU_P6 wakeup and RTC_CLKIN functions; also ADC0_SE15/TSI0_CH14 analog input, with alternates I2C1_SCL, TPM0_CH0 and I2S0_TXD0. |
| 45 | PTC2 | bidirectional | Port C GPIO bit 2 that also serves as ADC0_SE11/TSI0_CH15 analog input; alternates include I2C1_SDA, TPM0_CH1 and I2S0_TX_FS. |
| 46 | PTC3/LLWU_P7 | bidirectional | Port C GPIO bit 3 with LLWU_P7 wakeup input; alternates include UART1_RX, TPM0_CH2, CLKOUT and I2S0_TX_BCLK. |
| 47 | VSS | power_in | Digital ground pin (VSS). |
| 48 | VDD | power_in | Digital supply pin (VDD). |
| 49 | PTC4/LLWU_P8 | bidirectional | Port C GPIO bit 4 with LLWU_P8 wakeup input; default function DISABLED, alternates include SPI0_PCS0, UART1_TX, TPM0_CH3 and I2S0_MCLK. |
| 50 | PTC5/LLWU_P9 | bidirectional | Port C GPIO bit 5 with LLWU_P9 wakeup input; default function DISABLED, alternates include SPI0_SCK, LPTMR0_ALT2, I2S0_RXD0 and CMP0_OUT. |
| 51 | PTC6/LLWU_P10 | bidirectional | Port C GPIO bit 6 with LLWU_P10 wakeup input; also CMP0_IN0 analog input, with alternates SPI0_MOSI, EXTRG_IN, I2S0_RX_BCLK, SPI0_MISO and I2S0_MCLK. |
| 52 | PTC7 | bidirectional | Port C GPIO bit 7 that also serves as CMP0_IN1 analog input; alternates include SPI0_MISO, audioUSB_SOF_OUT, I2S0_RX_FS and SPI0_MOSI. |
| 53 | PTC8 | bidirectional | Port C GPIO bit 8 that also serves as CMP0_IN2 analog input; alternates include I2C0_SCL, TPM0_CH4 and I2S0_MCLK. |
| 54 | PTC9 | bidirectional | Port C GPIO bit 9 that also serves as CMP0_IN3 analog input; alternates include I2C0_SDA, TPM0_CH5 and I2S0_RX_BCLK. |
| 55 | PTC10 | bidirectional | Port C GPIO bit 10 with default function DISABLED; alternates include I2C1_SCL and I2S0_RX_FS. |
| 56 | PTC11 | bidirectional | Port C GPIO bit 11 with default function DISABLED; alternates include I2C1_SDA and I2S0_RXD0. |
| 57 | PTD0 | bidirectional | Port D GPIO bit 0 with default function DISABLED; alternates include SPI0_PCS0 and TPM0_CH0. |
| 58 | PTD1 | bidirectional | Port D GPIO bit 1 that also serves as ADC0_SE5b analog input; alternates include SPI0_SCK and TPM0_CH1. |
| 59 | PTD2 | bidirectional | Port D GPIO bit 2 with default function DISABLED; alternates include SPI0_MOSI, UART2_RX, TPM0_CH2 and SPI0_MISO. |
| 60 | PTD3 | bidirectional | Port D GPIO bit 3 with default function DISABLED; alternates include SPI0_MISO, UART2_TX, TPM0_CH3 and SPI0_MOSI. |
| 61 | PTD4/LLWU_P14 | bidirectional | Port D GPIO bit 4 with LLWU_P14 wakeup input; default function DISABLED, alternates include SPI1_PCS0, UART2_RX and TPM0_CH4. |
| 62 | PTD5 | bidirectional | Port D GPIO bit 5 that also serves as ADC0_SE6b analog input; alternates include SPI1_SCK, UART2_TX and TPM0_CH5. |
| 63 | PTD6/LLWU_P15 | bidirectional | Port D GPIO bit 6 with LLWU_P15 wakeup input; also ADC0_SE7b analog input, with alternates SPI1_MOSI, UART0_RX and SPI1_MISO. |
| 64 | PTD7 | bidirectional | Port D GPIO bit 7 with default function DISABLED; alternates include SPI1_MISO, UART0_TX and SPI1_MOSI. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | TSTG | -55 | 150 | °C | 4 | ||
| Solder temperature, lead-free | TSDR | 260 | °C | 4 | |||
| Electrostatic discharge voltage, human body model | VHBM | -2000 | 2000 | V | human body model | 4 | |
| Electrostatic discharge voltage, charged-device model | VCDM | -500 | 500 | V | charged-device model | 4 | |
| Latch-up current | ILAT | -100 | 100 | mA | ambient temperature of 105 °C | 4 | |
| Digital supply voltage | VDD | -0.3 | 3.8 | V | 5 | ||
| Digital supply current | IDD | 120 | mA | 5 | |||
| IO pin input voltage | VIO | -0.3 | V | 5 | |||
| Instantaneous maximum current single pin limit (all port pins) | ID | -25 | 25 | mA | applies to all port pins | 5 | |
| USB regulator input | VREGIN | -0.3 | 6 | V | 5 | ||
| Supply voltage | VDD | 1.71 | 3.6 | V | 6 | ||
| Analog supply voltage | VDDA | 1.71 | 3.6 | V | 6 | ||
| VDD-to-VDDA differential voltage | VDD, VDDA | -0.1 | 0.1 | V | 6 | ||
| VSS-to-VSSA differential voltage | VSS, VSSA | -0.1 | 0.1 | V | 6 | ||
| IO pin negative DC injection current, single pin | IICIO | -3 | mA | VIN < VSS-0.3V | 6 | ||
| Contiguous pin DC injection current, regional limit | IICcont | -25 | mA | negative current injection, includes sum of 16 contiguous pins | 6 | ||
| VDD voltage required to retain RAM | VRAM | 1.2 | V | 6 | |||
| Falling VDD POR detect voltage | VPOR | 0.8 | 1.1 | 1.5 | V | 6 | |
| Total deviation of trimmed average DCO output frequency over voltage and temperature | Δfdco_t | -3 | 3 | %fdco | over voltage and temperature | 21 | |
| Internal reference frequency (fast clock), user trimmed | fintf_t | 3 | 5 | MHz | user trimmed at nominal VDD and 25 °C | 21 | |
| FLL reference frequency range | ffll_ref | 31.25 | 39.0625 | kHz | 21 | ||
| DCO output frequency range, low range | fdco | 20 | 20.97 | 25 | MHz | Low range (DRS = 00) | 21 |
| DCO output frequency range, mid range | fdco | 40 | 41.94 | 48 | MHz | Mid range (DRS = 01) | 21 |
| FLL target frequency acquisition time | tfll_acquire | 1 | ms | 21 | |||
| VCO operating frequency | fvco | 48 | 100 | MHz | 21 | ||
| PLL reference frequency range | fpll_ref | 2 | 4 | MHz | 21 | ||
| Lock entry frequency tolerance | Dlock | -1.49 | 2.98 | % | 22 | ||
| Lock exit frequency tolerance | Dunl | -4.47 | 5.97 | % | 22 | ||
| Oscillator crystal or resonator frequency, low-frequency mode | fosc_lo | 32 | 40 | kHz | MCG_C2[RANGE]=00 | 24 | |
| Oscillator crystal or resonator frequency, high-frequency mode (low range) | fosc_hi_1 | 3 | 8 | MHz | MCG_C2[RANGE]=01 | 24 | |
| Oscillator crystal or resonator frequency, high-frequency mode (high range) | fosc_hi_2 | 8 | 32 | MHz | MCG_C2[RANGE]=1x | 24 | |
| Input clock frequency (external clock mode) | fec_extal | 48 | MHz | external clock mode | 24 | ||
| Input clock duty cycle (external clock mode) | tdc_extal | 40 | 50 | 60 | % | external clock mode | 24 |
| Longword Program high-voltage time | thvpgm4 | 7.5 | 18 | μs | 25 | ||
| Sector Erase high-voltage time | thversscr | 13 | 113 | ms | 25 | ||
| Program Longword execution time | tpgm4 | 65 | 145 | μs | 25 | ||
| Erase Flash Block execution time, 128 KB program flash | tersblk128k | 88 | 600 | ms | 128 KB program flash | 25 | |
| Average current adder during high voltage flash programming operation | IDD_PGM | 2.5 | 6 | mA | 26 | ||
| Average current adder during high voltage flash erase operation | IDD_ERS | 1.5 | 4 | mA | 26 | ||
| Data retention after up to 10 K cycles | tnvmretp10k | 5 | 50 | years | 26 | ||
| Data retention after up to 1 K cycles | tnvmretp1k | 20 | 100 | years | 26 | ||
| Cycling endurance | nnvmcycp | 10 | 50 | K cycles | -40 °C ≤ Tj ≤ 125 °C | 26 | |
| Supply voltage (16-bit ADC, absolute) | VDDA | 1.71 | 3.6 | V | Absolute | 27 | |
| Supply voltage delta to VDD (VDD, VDDA) | ΔVDDA | -100 | 0 | 100 | mV | 27 | |
| Ground voltage delta to VSS (VSS, VSSA) | ΔVSSA | -100 | 0 | 100 | mV | 27 | |
| ADC reference voltage high | VREFH | 1.13 | V | 27 | |||
| ADC conversion clock frequency | fADCK | 1 | 18 | MHz | ≤ 13-bit mode | 27 | |
| ADC conversion clock frequency | fADCK | 2 | 12 | MHz | 16-bit mode | 27 | |
| Supply current | IDDA_ADC | 0.215 | 1.7 | mA | 28 | ||
| Total unadjusted error | TUE | -6.8 | 4 | 6.8 | LSB | 12-bit modes | 28 |
| Temp sensor slope | Temp sensor slope | 1.55 | 1.62 | 1.69 | mV/°C | Across the full temperature range of the device | 29 |
| Temp sensor voltage | VTEMP25 | 706 | 716 | 726 | mV | 25 °C | 29 |
| Input supply voltage | VREGIN | 2.7 | 5.5 | V | 37 | ||
| Quiescent current, Run mode | IDDon | 125 | 186 | μA | load current equal zero, input supply (VREGIN) > 3.6 V | 37 | |
| Quiescent current, Standby mode | IDDstby | 1.1 | 10 | μA | Standby mode, load current equal zero | 37 | |
| Maximum load current, Run mode | ILOADrun | 120 | mA | Run mode | 37 | ||
| Regulator output voltage, Run mode | VReg33out | 3 | 3.3 | 3.6 | V | Input supply (VREGIN) > 3.6 V, Run mode | 37 |
| Regulator output voltage, Standby mode | VReg33out | 2.1 | 2.8 | 3.6 | V | Input supply (VREGIN) > 3.6 V, Standby mode | 37 |
| Regulator output voltage, pass-through mode | VReg33out | 2.1 | 3.6 | V | Input supply (VREGIN) < 3.6 V, pass-through mode | 37 | |
| External output capacitor | COUT | 1.76 | 2.2 | 8.16 | μF | 37 |
CAD (KiCad official)
- Symbol:
MKL26Z256VLH4 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
mkl26z256vlh4-etched.step/mkl26z256vlh4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mkl26z256vlh4.step/mkl26z256vlh4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (63 pp, sha256
8ef60e041c2c01b4, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MKL26Z256VLH4
**NXP Semicon** · Pre-ordered MCUs · LQFP-64(10x10)
MKL26Z256VLH4 from NXP Semicon, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTE0 | bidirectional | Port E GPIO bit 0 with default function DISABLED; alternate functions listed for this pin include SPI1_MISO, UART1_TX, RTC_CLKOUT, CMP0_OUT and I2C1_SDA. |
| 2 | PTE1 | bidirectional | Port E GPIO bit 1 with default function DISABLED; alternate functions listed for this pin include SPI1_MOSI, UART1_RX, SPI1_MISO and I2C1_SCL. |
| 3 | VDD | power_in | Digital supply pin (VDD). |
| 4 | VSS | power_in | Digital ground pin (VSS). |
| 5 | USB0_DP | bidirectional | USB full-/low-speed On-the-Go D+ data line of the on-chip USB transceiver. |
| 6 | USB0_DM | bidirectional | USB full-/low-speed On-the-Go D- data line of the on-chip USB transceiver. |
| 7 | VOUT33 | power_out | 3.3 V output of the on-chip 5 V to 3.3 V USB regulator. |
| 8 | VREGIN | power_in | Input supply to the on-chip 5 V to 3.3 V USB voltage regulator. |
| 9 | PTE20 | bidirectional | Port E GPIO bit 20 that also serves as ADC0_DP0/ADC0_SE0 analog input; alternates include TPM1_CH0 and UART0_TX. |
| 10 | PTE21 | bidirectional | Port E GPIO bit 21 that also serves as ADC0_DM0/ADC0_SE4a analog input; alternates include TPM1_CH1 and UART0_RX. |
| 11 | PTE22 | bidirectional | Port E GPIO bit 22 that also serves as ADC0_DP3/ADC0_SE3 analog input; alternates include TPM2_CH0 and UART2_TX. |
| 12 | PTE23 | bidirectional | Port E GPIO bit 23 that also serves as ADC0_DM3/ADC0_SE7a analog input; alternates include TPM2_CH1 and UART2_RX. |
| 13 | VDDA | power_in | Analog supply pin (VDDA). |
| 14 | VREFH | power_in | High-side voltage reference pin (VREFH). |
| 15 | VREFL | power_in | Low-side voltage reference pin (VREFL). |
| 16 | VSSA | power_in | Analog ground pin (VSSA). |
| 17 | PTE29 | bidirectional | Port E GPIO bit 29 that also serves as CMP0_IN5/ADC0_SE4b analog input; alternates include TPM0_CH2 and TPM_CLKIN0. |
| 18 | PTE30 | bidirectional | Port E GPIO bit 30 shared with DAC0_OUT, ADC0_SE23 and CMP0_IN4; alternates include TPM0_CH3 and TPM_CLKIN1. |
| 19 | PTE31 | bidirectional | Port E GPIO bit 31 with default function DISABLED; alternate function listed is TPM0_CH4. |
| 20 | PTE24 | bidirectional | Port E GPIO bit 24 with default function DISABLED; alternates include TPM0_CH0 and I2C0_SCL. |
| 21 | PTE25 | bidirectional | Port E GPIO bit 25 with default function DISABLED; alternates include TPM0_CH1 and I2C0_SDA. |
| 22 | PTA0 | bidirectional | Port A GPIO bit 0 whose default function is SWD_CLK (serial wire debug clock); alternates include TSI0_CH1 and TPM0_CH5. |
| 23 | PTA1 | bidirectional | Port A GPIO bit 1 with default function DISABLED; alternates include TSI0_CH2, UART0_RX and TPM2_CH0. |
| 24 | PTA2 | bidirectional | Port A GPIO bit 2 with default function DISABLED; alternates include TSI0_CH3, UART0_TX and TPM2_CH1. |
| 25 | PTA3 | bidirectional | Port A GPIO bit 3 whose default function is SWD_DIO (serial wire debug data); alternates include TSI0_CH4, I2C1_SCL and TPM0_CH0. |
| 26 | PTA4 | bidirectional | Port A GPIO bit 4 whose default function is NMI_b (non-maskable interrupt); alternates include TSI0_CH5, I2C1_SDA and TPM0_CH1. |
| 27 | PTA5 | bidirectional | Port A GPIO bit 5 with default function DISABLED; alternates include USB_CLKIN, TPM0_CH2 and I2S0_TX_BCLK. |
| 28 | PTA12 | bidirectional | Port A GPIO bit 12 with default function DISABLED; alternates include TPM1_CH0 and I2S0_TXD0. |
| 29 | PTA13 | bidirectional | Port A GPIO bit 13 with default function DISABLED; alternates include TPM1_CH1 and I2S0_TX_FS. |
| 30 | VDD | power_in | Digital supply pin (VDD). |
| 31 | VSS | power_in | Digital ground pin (VSS). |
| 32 | PTA18 | input | Crystal oscillator input pin (EXTAL0); the pin also carries PTA18, UART1_RX and TPM_CLKIN0 functions. |
| 33 | PTA19 | output | Crystal oscillator output pin (XTAL0); the pin also carries PTA19, UART1_TX, TPM_CLKIN1 and LPTMR0_ALT1 functions. |
| 34 | PTA20 | bidirectional | Pin whose default function is RESET_b (external reset); it is also Port A GPIO bit 20. |
| 35 | PTB0/LLWU_P5 | bidirectional | Port B GPIO bit 0 with LLWU_P5 wakeup input; also ADC0_SE8/TSI0_CH0 analog input, with alternates I2C0_SCL and TPM1_CH0. |
| 36 | PTB1 | bidirectional | Port B GPIO bit 1 that also serves as ADC0_SE9/TSI0_CH6 analog input; alternates include I2C0_SDA and TPM1_CH1. |
| 37 | PTB2 | bidirectional | Port B GPIO bit 2 that also serves as ADC0_SE12/TSI0_CH7 analog input; alternates include I2C0_SCL and TPM2_CH0. |
| 38 | PTB3 | bidirectional | Port B GPIO bit 3 that also serves as ADC0_SE13/TSI0_CH8 analog input; alternates include I2C0_SDA and TPM2_CH1. |
| 39 | PTB16 | bidirectional | Port B GPIO bit 16 that also serves as TSI0_CH9; alternates include SPI1_MOSI, UART0_RX, TPM_CLKIN0 and SPI1_MISO. |
| 40 | PTB17 | bidirectional | Port B GPIO bit 17 that also serves as TSI0_CH10; alternates include SPI1_MISO, UART0_TX, TPM_CLKIN1 and SPI1_MOSI. |
| 41 | PTB18 | bidirectional | Port B GPIO bit 18 that also serves as TSI0_CH11; alternates include TPM2_CH0 and I2S0_TX_BCLK. |
| 42 | PTB19 | bidirectional | Port B GPIO bit 19 that also serves as TSI0_CH12; alternates include TPM2_CH1 and I2S0_TX_FS. |
| 43 | PTC0 | bidirectional | Port C GPIO bit 0 that also serves as ADC0_SE14/TSI0_CH13 analog input; alternates include EXTRG_IN, audioUSB_SOF_OUT, CMP0_OUT and I2S0_TXD0. |
| 44 | PTC1/LLWU_P6/RTC_CLKIN | bidirectional | Port C GPIO bit 1 with LLWU_P6 wakeup and RTC_CLKIN functions; also ADC0_SE15/TSI0_CH14 analog input, with alternates I2C1_SCL, TPM0_CH0 and I2S0_TXD0. |
| 45 | PTC2 | bidirectional | Port C GPIO bit 2 that also serves as ADC0_SE11/TSI0_CH15 analog input; alternates include I2C1_SDA, TPM0_CH1 and I2S0_TX_FS. |
| 46 | PTC3/LLWU_P7 | bidirectional | Port C GPIO bit 3 with LLWU_P7 wakeup input; alternates include UART1_RX, TPM0_CH2, CLKOUT and I2S0_TX_BCLK. |
| 47 | VSS | power_in | Digital ground pin (VSS). |
| 48 | VDD | power_in | Digital supply pin (VDD). |
| 49 | PTC4/LLWU_P8 | bidirectional | Port C GPIO bit 4 with LLWU_P8 wakeup input; default function DISABLED, alternates include SPI0_PCS0, UART1_TX, TPM0_CH3 and I2S0_MCLK. |
| 50 | PTC5/LLWU_P9 | bidirectional | Port C GPIO bit 5 with LLWU_P9 wakeup input; default function DISABLED, alternates include SPI0_SCK, LPTMR0_ALT2, I2S0_RXD0 and CMP0_OUT. |
| 51 | PTC6/LLWU_P10 | bidirectional | Port C GPIO bit 6 with LLWU_P10 wakeup input; also CMP0_IN0 analog input, with alternates SPI0_MOSI, EXTRG_IN, I2S0_RX_BCLK, SPI0_MISO and I2S0_MCLK. |
| 52 | PTC7 | bidirectional | Port C GPIO bit 7 that also serves as CMP0_IN1 analog input; alternates include SPI0_MISO, audioUSB_SOF_OUT, I2S0_RX_FS and SPI0_MOSI. |
| 53 | PTC8 | bidirectional | Port C GPIO bit 8 that also serves as CMP0_IN2 analog input; alternates include I2C0_SCL, TPM0_CH4 and I2S0_MCLK. |
| 54 | PTC9 | bidirectional | Port C GPIO bit 9 that also serves as CMP0_IN3 analog input; alternates include I2C0_SDA, TPM0_CH5 and I2S0_RX_BCLK. |
| 55 | PTC10 | bidirectional | Port C GPIO bit 10 with default function DISABLED; alternates include I2C1_SCL and I2S0_RX_FS. |
| 56 | PTC11 | bidirectional | Port C GPIO bit 11 with default function DISABLED; alternates include I2C1_SDA and I2S0_RXD0. |
| 57 | PTD0 | bidirectional | Port D GPIO bit 0 with default function DISABLED; alternates include SPI0_PCS0 and TPM0_CH0. |
| 58 | PTD1 | bidirectional | Port D GPIO bit 1 that also serves as ADC0_SE5b analog input; alternates include SPI0_SCK and TPM0_CH1. |
| 59 | PTD2 | bidirectional | Port D GPIO bit 2 with default function DISABLED; alternates include SPI0_MOSI, UART2_RX, TPM0_CH2 and SPI0_MISO. |
| 60 | PTD3 | bidirectional | Port D GPIO bit 3 with default function DISABLED; alternates include SPI0_MISO, UART2_TX, TPM0_CH3 and SPI0_MOSI. |
| 61 | PTD4/LLWU_P14 | bidirectional | Port D GPIO bit 4 with LLWU_P14 wakeup input; default function DISABLED, alternates include SPI1_PCS0, UART2_RX and TPM0_CH4. |
| 62 | PTD5 | bidirectional | Port D GPIO bit 5 that also serves as ADC0_SE6b analog input; alternates include SPI1_SCK, UART2_TX and TPM0_CH5. |
| 63 | PTD6/LLWU_P15 | bidirectional | Port D GPIO bit 6 with LLWU_P15 wakeup input; also ADC0_SE7b analog input, with alternates SPI1_MOSI, UART0_RX and SPI1_MISO. |
| 64 | PTD7 | bidirectional | Port D GPIO bit 7 with default function DISABLED; alternates include SPI1_MISO, UART0_TX and SPI1_MOSI. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | TSTG | -55 | | 150 | °C | | 4 |
| Solder temperature, lead-free | TSDR | | | 260 | °C | | 4 |
| Electrostatic discharge voltage, human body model | VHBM | -2000 | | 2000 | V | human body model | 4 |
| Electrostatic discharge voltage, charged-device model | VCDM | -500 | | 500 | V | charged-device model | 4 |
| Latch-up current | ILAT | -100 | | 100 | mA | ambient temperature of 105 °C | 4 |
| Digital supply voltage | VDD | -0.3 | | 3.8 | V | | 5 |
| Digital supply current | IDD | | | 120 | mA | | 5 |
| IO pin input voltage | VIO | -0.3 | | | V | | 5 |
| Instantaneous maximum current single pin limit (all port pins) | ID | -25 | | 25 | mA | applies to all port pins | 5 |
| USB regulator input | VREGIN | -0.3 | | 6 | V | | 5 |
| Supply voltage | VDD | 1.71 | | 3.6 | V | | 6 |
| Analog supply voltage | VDDA | 1.71 | | 3.6 | V | | 6 |
| VDD-to-VDDA differential voltage | VDD, VDDA | -0.1 | | 0.1 | V | | 6 |
| VSS-to-VSSA differential voltage | VSS, VSSA | -0.1 | | 0.1 | V | | 6 |
| IO pin negative DC injection current, single pin | IICIO | -3 | | | mA | VIN < VSS-0.3V | 6 |
| Contiguous pin DC injection current, regional limit | IICcont | -25 | | | mA | negative current injection, includes sum of 16 contiguous pins | 6 |
| VDD voltage required to retain RAM | VRAM | 1.2 | | | V | | 6 |
| Falling VDD POR detect voltage | VPOR | 0.8 | 1.1 | 1.5 | V | | 6 |
| Total deviation of trimmed average DCO output frequency over voltage and temperature | Δfdco_t | -3 | | 3 | %fdco | over voltage and temperature | 21 |
| Internal reference frequency (fast clock), user trimmed | fintf_t | 3 | | 5 | MHz | user trimmed at nominal VDD and 25 °C | 21 |
| FLL reference frequency range | ffll_ref | 31.25 | | 39.0625 | kHz | | 21 |
| DCO output frequency range, low range | fdco | 20 | 20.97 | 25 | MHz | Low range (DRS = 00) | 21 |
| DCO output frequency range, mid range | fdco | 40 | 41.94 | 48 | MHz | Mid range (DRS = 01) | 21 |
| FLL target frequency acquisition time | tfll_acquire | | | 1 | ms | | 21 |
| VCO operating frequency | fvco | 48 | | 100 | MHz | | 21 |
| PLL reference frequency range | fpll_ref | 2 | | 4 | MHz | | 21 |
| Lock entry frequency tolerance | Dlock | -1.49 | | 2.98 | % | | 22 |
| Lock exit frequency tolerance | Dunl | -4.47 | | 5.97 | % | | 22 |
| Oscillator crystal or resonator frequency, low-frequency mode | fosc_lo | 32 | | 40 | kHz | MCG_C2[RANGE]=00 | 24 |
| Oscillator crystal or resonator frequency, high-frequency mode (low range) | fosc_hi_1 | 3 | | 8 | MHz | MCG_C2[RANGE]=01 | 24 |
| Oscillator crystal or resonator frequency, high-frequency mode (high range) | fosc_hi_2 | 8 | | 32 | MHz | MCG_C2[RANGE]=1x | 24 |
| Input clock frequency (external clock mode) | fec_extal | | | 48 | MHz | external clock mode | 24 |
| Input clock duty cycle (external clock mode) | tdc_extal | 40 | 50 | 60 | % | external clock mode | 24 |
| Longword Program high-voltage time | thvpgm4 | | 7.5 | 18 | μs | | 25 |
| Sector Erase high-voltage time | thversscr | | 13 | 113 | ms | | 25 |
| Program Longword execution time | tpgm4 | | 65 | 145 | μs | | 25 |
| Erase Flash Block execution time, 128 KB program flash | tersblk128k | | 88 | 600 | ms | 128 KB program flash | 25 |
| Average current adder during high voltage flash programming operation | IDD_PGM | | 2.5 | 6 | mA | | 26 |
| Average current adder during high voltage flash erase operation | IDD_ERS | | 1.5 | 4 | mA | | 26 |
| Data retention after up to 10 K cycles | tnvmretp10k | 5 | 50 | | years | | 26 |
| Data retention after up to 1 K cycles | tnvmretp1k | 20 | 100 | | years | | 26 |
| Cycling endurance | nnvmcycp | 10 | 50 | | K cycles | -40 °C ≤ Tj ≤ 125 °C | 26 |
| Supply voltage (16-bit ADC, absolute) | VDDA | 1.71 | | 3.6 | V | Absolute | 27 |
| Supply voltage delta to VDD (VDD, VDDA) | ΔVDDA | -100 | 0 | 100 | mV | | 27 |
| Ground voltage delta to VSS (VSS, VSSA) | ΔVSSA | -100 | 0 | 100 | mV | | 27 |
| ADC reference voltage high | VREFH | 1.13 | | | V | | 27 |
| ADC conversion clock frequency | fADCK | 1 | | 18 | MHz | ≤ 13-bit mode | 27 |
| ADC conversion clock frequency | fADCK | 2 | | 12 | MHz | 16-bit mode | 27 |
| Supply current | IDDA_ADC | 0.215 | | 1.7 | mA | | 28 |
| Total unadjusted error | TUE | -6.8 | 4 | 6.8 | LSB | 12-bit modes | 28 |
| Temp sensor slope | Temp sensor slope | 1.55 | 1.62 | 1.69 | mV/°C | Across the full temperature range of the device | 29 |
| Temp sensor voltage | VTEMP25 | 706 | 716 | 726 | mV | 25 °C | 29 |
| Input supply voltage | VREGIN | 2.7 | | 5.5 | V | | 37 |
| Quiescent current, Run mode | IDDon | | 125 | 186 | μA | load current equal zero, input supply (VREGIN) > 3.6 V | 37 |
| Quiescent current, Standby mode | IDDstby | | 1.1 | 10 | μA | Standby mode, load current equal zero | 37 |
| Maximum load current, Run mode | ILOADrun | | | 120 | mA | Run mode | 37 |
| Regulator output voltage, Run mode | VReg33out | 3 | 3.3 | 3.6 | V | Input supply (VREGIN) > 3.6 V, Run mode | 37 |
| Regulator output voltage, Standby mode | VReg33out | 2.1 | 2.8 | 3.6 | V | Input supply (VREGIN) > 3.6 V, Standby mode | 37 |
| Regulator output voltage, pass-through mode | VReg33out | 2.1 | | 3.6 | V | Input supply (VREGIN) < 3.6 V, pass-through mode | 37 |
| External output capacitor | COUT | 1.76 | 2.2 | 8.16 | μF | | 37 |
## CAD (KiCad official)
- Symbol: `MKL26Z256VLH4`
- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`
- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files: `mkl26z256vlh4-etched.step` / `mkl26z256vlh4-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mkl26z256vlh4.step` / `mkl26z256vlh4.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [NXP Semicon datasheet](https://www.nxp.com/docs/en/data-sheet/KL26P121M48SF4.pdf) (63 pp, sha256 `8ef60e041c2c01b4`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mkl26z256vlh4-datasheet.pdf)