main
History Download
Ray Publish 0.1.0 efcdaa6

MKL26Z128VFM4

NXP Semicon · NXP MCU · QFN-32-EP(5x5)

MKL26Z128VFM4 from NXP Semicon, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PTE0 bidirectional GPIO port E bit 0, disabled by default, with ALT functions SPI1_MISO, UART1_TX, RTC_CLKOUT, CMP0_OUT and I2C1_SDA.
2 VSS power_in Digital ground supply pin.
3 USB0_DP bidirectional USB0 full-/low-speed data plus line of the on-chip USB transceiver.
4 USB0_DM bidirectional USB0 full-/low-speed data minus line of the on-chip USB transceiver.
5 VOUT33 power_out Output of the on-chip 5 V to 3.3 V USB voltage regulator.
6 VREGIN power_in Input to the on-chip 5 V to 3.3 V USB voltage regulator.
7 VDDA power_in Analog power supply pin.
8 VSSA power_in Analog ground pin.
9 PTE30 bidirectional GPIO port E bit 30 with analog default DAC0_OUT/ADC0_SE23/CMP0_IN4 and ALT3 TPM0_CH3, ALT4 TPM_CLKIN1.
10 PTA0 bidirectional GPIO port A bit 0, default SWD_CLK, with TSI0_CH1 (ALT0) and TPM0_CH5 (ALT3).
11 PTA1 bidirectional GPIO port A bit 1, disabled by default, with TSI0_CH2, UART0_RX and TPM2_CH0.
12 PTA2 bidirectional GPIO port A bit 2, disabled by default, with TSI0_CH3, UART0_TX and TPM2_CH1.
13 PTA3 bidirectional GPIO port A bit 3, default SWD_DIO, with TSI0_CH4, I2C1_SCL and TPM0_CH0.
14 PTA4 bidirectional GPIO port A bit 4, default NMI_b, with TSI0_CH5, I2C1_SDA and TPM0_CH1.
15 VDD power_in Digital power supply pin (device operating range 1.71 to 3.6 V).
16 VSS power_in Digital ground supply pin.
17 PTA18 bidirectional GPIO port A bit 18, default EXTAL0 crystal oscillator pin, with UART1_RX and TPM_CLKIN0.
18 PTA19 bidirectional GPIO port A bit 19, default XTAL0 crystal oscillator pin, with UART1_TX, TPM_CLKIN1 and LPTMR0_ALT1.
19 PTA20 bidirectional GPIO port A bit 20, default RESET_b external reset pin.
20 PTB0/LLWU_P5 bidirectional GPIO port B bit 0 and LLWU_P5 wakeup input, with ADC0_SE8/TSI0_CH0, I2C0_SCL and TPM1_CH0.
21 PTB1 bidirectional GPIO port B bit 1 with ADC0_SE9/TSI0_CH6, I2C0_SDA and TPM1_CH1.
22 PTC1/LLWU_P6/RTC_CLKIN bidirectional GPIO port C bit 1, LLWU_P6 wakeup input and RTC_CLKIN, with ADC0_SE15/TSI0_CH14, I2C1_SCL, TPM0_CH0 and I2S0_TXD0.
23 PTC2 bidirectional GPIO port C bit 2 with ADC0_SE11/TSI0_CH15, I2C1_SDA, TPM0_CH1 and I2S0_TX_FS.
24 PTC3/LLWU_P7 bidirectional GPIO port C bit 3 and LLWU_P7 wakeup input, disabled by default, with UART1_RX, TPM0_CH2, CLKOUT and I2S0_TX_BCLK.
25 PTC4/LLWU_P8 bidirectional GPIO port C bit 4 and LLWU_P8 wakeup input, disabled by default, with SPI0_PCS0, UART1_TX, TPM0_CH3 and I2S0_MCLK.
26 PTC5/LLWU_P9 bidirectional GPIO port C bit 5 and LLWU_P9 wakeup input, with SPI0_SCK, LPTMR0_ALT2, I2S0_RXD0 and CMP0_OUT.
27 PTC6/LLWU_P10 bidirectional GPIO port C bit 6 and LLWU_P10 wakeup input, default CMP0_IN0, with SPI0_MOSI, EXTRG_IN, I2S0_RX_BCLK, SPI0_MISO and I2S0_MCLK.
28 PTC7 bidirectional GPIO port C bit 7, default CMP0_IN1, with SPI0_MISO, audioUSB_SOF_OUT, I2S0_RX_FS and SPI0_MOSI.
29 PTD4/LLWU_P14 bidirectional GPIO port D bit 4 and LLWU_P14 wakeup input, disabled by default, with SPI1_PCS0, UART2_RX and TPM0_CH4.
30 PTD5 bidirectional GPIO port D bit 5 with ADC0_SE6b, SPI1_SCK, UART2_TX and TPM0_CH5.
31 PTD6/LLWU_P15 bidirectional GPIO port D bit 6 and LLWU_P15 wakeup input, with ADC0_SE7b, SPI1_MOSI, UART0_RX and SPI1_MISO.
32 PTD7 bidirectional GPIO port D bit 7, disabled by default, with SPI1_MISO, UART0_TX and SPI1_MOSI.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package QFN-32-EP(5x5)
Category Embedded Processors & Controllers
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage temperature TSTG -55 150 °C 4
Solder temperature, lead-free TSDR 260 °C 4
ESD human body model VHBM -2000 2000 V 4
ESD charged-device model VCDM -500 500 V 4
Latch-up current ILAT -100 100 mA ambient temperature of 105 °C 4
Digital supply voltage VDD -0.3 3.8 V 5
Digital supply current IDD 120 mA 5
IO pin input voltage VIO -0.3 3.8 V VDD + 0.3 V max as printed 5
Instantaneous maximum current single pin limit ID -25 25 mA applies to all port pins 5
Analog supply voltage VDDA -0.3 3.8 V VDD, 0.3 to VDD + 0.3 V as printed 5
USB_DP input voltage VUSB_DP -0.3 3.63 V 5
USB_DM input voltage VUSB_DM -0.3 3.63 V 5
USB regulator input VREGIN -0.3 6 V 5
Supply voltage VDD 1.71 3.6 V 6
Analog supply voltage VDDA 1.71 3.6 V 6
VDD-to-VDDA differential voltage VDD, VDDA -0.1 0.1 V 6
VSS-to-VSSA differential voltage VSS, VSSA -0.1 0.1 V 6
Input high voltage VIH 0.7 V 2.7 V ≤ VDD ≤ 3.6 V; min 0.7 × VDD 6
Input high voltage VIH 0.75 V 1.7 V ≤ VDD ≤ 2.7 V; min 0.75 × VDD 6
Input low voltage VIL 0.35 V 2.7 V ≤ VDD ≤ 3.6 V; max 0.35 × VDD 6
Input low voltage VIL 0.3 V 1.7 V ≤ VDD ≤ 2.7 V; max 0.3 × VDD 6
Input hysteresis VHYS 0.06 V min 0.06 × VDD 6
IO pin negative DC injection current, single pin IICIO -3 mA VIN < VSS-0.3V 6
Contiguous pin DC injection current IICcont -25 mA Negative current injection 6
VDD voltage required to retain RAM VRAM 1.2 V 6
Falling VDD POR detect voltage VPOR 0.8 1.1 1.5 V 6
Internal reference frequency (fast clock) factory trimmed Δfdco_t 3 %fdco over voltage and temperature, trimmed; ± 3 printed (typ +0.5/-0.7) 21
Total deviation of trimmed DCO frequency, 0-70 °C Δfdco_t 0.4 1.5 %fdco fixed voltage and temperature range of 0-70 °C; ± printed 21
Frequency deviation of fast internal reference Δfintf_ft 3 %fintf_ft over temperature and voltage, factory trimmed at nominal VDD and 25 °C; ± 3 printed 21
Internal reference frequency (fast clock) user trimmed fintf_t 3 5 MHz user trimmed at nominal VDD and 25 °C 21
FLL reference frequency range ffll_ref 31.25 39.0625 kHz 21
DCO output frequency range, low range fdco 20 20.97 25 MHz Low range (DRS = 00), 640 × ffll_ref 21
DCO output frequency range, mid range fdco 40 41.94 48 MHz Mid range (DRS = 01), 1280 × ffll_ref 21
FLL target frequency acquisition time tfll_acquire 1 ms 21
PLL VCO operating frequency fvco 48 100 MHz 21
PLL reference frequency range fpll_ref 2 4 MHz 21
Lock entry frequency tolerance Dlock -1.49 2.98 % ± 1.49 min to ± 2.98 max as printed 22
Lock exit frequency tolerance Dunl -4.47 5.97 % ± 4.47 min to ± 5.97 max as printed 22
Oscillator supply voltage VDD 1.71 3.6 V 22
Oscillator crystal frequency, low-frequency mode fosc_lo 32 40 kHz MCG_C2[RANGE]=00 24
Oscillator crystal frequency, high-frequency low range fosc_hi_1 3 8 MHz MCG_C2[RANGE]=01 24
Oscillator crystal frequency, high-frequency high range fosc_hi_2 8 32 MHz MCG_C2[RANGE]=1x 24
Input clock frequency (external clock mode) fec_extal 48 MHz 24
Input clock duty cycle (external clock mode) tdc_extal 40 50 60 % 24
Longword Program high-voltage time thvpgm4 7.5 18 μs 25
Sector Erase high-voltage time thversscr 13 113 ms 25
Erase All high-voltage time thversall 52 452 ms 25
Program Longword execution time tpgm4 65 145 μs 25
Erase Flash Sector execution time tersscr 14 114 ms 25
Erase All Blocks execution time tersall 88 650 ms 25
Average current adder during flash programming IDD_PGM 2.5 6 mA 25
Average current adder during flash erase IDD_ERS 1.5 4 mA 25
Data retention after up to 10 K cycles tnvmretp10k 5 50 years 26
Data retention after up to 1 K cycles tnvmretp1k 20 100 years 26
Cycling endurance nnvmcycp 10 50 cycles 10 K min, 50 K typ; -40 °C ≤ Tj ≤ 125 °C 26
ADC supply voltage VDDA 1.71 3.6 V Absolute 26
ADC supply current IDDA_ADC 0.215 1.7 mA 28
Total unadjusted error, 12-bit modes TUE 4 6.8 LSB 12-bit modes; ± printed 28
DAC supply current low-power mode IDDA_DACLP 250 μA 34
DAC supply current high-speed mode IDDA_DACHP 900 μA 34
USB regulator input supply voltage VREGIN 2.7 5.5 V 37
USB regulator output voltage, run mode VReg33out 3 3.3 3.6 V Input supply (VREGIN) > 3.6 V, Run mode 37

CAD (KiCad official)

  • Symbol: MKL26Z128VFM4
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: mkl26z128vfm4-etched.step / mkl26z128vfm4-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mkl26z128vfm4.step / mkl26z128vfm4.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (61 pp, sha256 0b9079acb0fc3df6, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF