main
Ray
Publish 0.1.0
01b2e32
MKL25Z128VFT4
NXP Semicon · Pre-ordered MCUs · QFN-48-EP(7x7)
MKL25Z128VFT4 from NXP Semicon, in a QFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Digital supply pin; the device voltage range is 1.71 to 3.6 V. |
| 2 | VSS | power_in | Digital ground pin. |
| 3 | USB0_DP | bidirectional | USB full-/low-speed D+ data line of the on-chip USB On-the-Go transceiver. |
| 4 | USB0_DM | bidirectional | USB full-/low-speed D- data line of the on-chip USB On-the-Go transceiver. |
| 5 | VOUT33 | power_out | 3.3 V output of the on-chip USB 5 V to 3.3 V regulator. |
| 6 | VREGIN | power_in | Input supply to the on-chip USB 5 V to 3.3 V regulator. |
| 7 | PTE20 | bidirectional | Port E bit 20 GPIO, with ADC0_DP0/ADC0_SE0 analog function and TPM1_CH0 and UART0_TX alternate functions. |
| 8 | PTE21 | bidirectional | Port E bit 21 GPIO, with ADC0_DM0/ADC0_SE4a analog function and TPM1_CH1 and UART0_RX alternate functions. |
| 9 | VDDA | power_in | Analog supply pin. |
| 10 | VREFH | power_in | High-side voltage reference pin (VREFH). |
| 11 | VREFL | power_in | Low-side voltage reference pin (VREFL). |
| 12 | VSSA | power_in | Analog ground pin. |
| 13 | PTE29 | bidirectional | Port E bit 29 GPIO, with CMP0_IN5/ADC0_SE4b analog input and TPM0_CH2 and TPM_CLKIN0 alternate functions. |
| 14 | PTE30 | bidirectional | Port E bit 30 GPIO, with DAC0_OUT/ADC0_SE23/CMP0_IN4 analog function and TPM0_CH3 and TPM_CLKIN1 alternate functions. |
| 15 | PTE24 | bidirectional | Port E bit 24 GPIO, with TPM0_CH0 and I2C0_SCL alternate functions. |
| 16 | PTE25 | bidirectional | Port E bit 25 GPIO, with TPM0_CH1 and I2C0_SDA alternate functions. |
| 17 | PTA0 | bidirectional | Port A bit 0 GPIO, with SWD_CLK debug clock and TSI0_CH1 and TPM0_CH5 functions listed for this pin. |
| 18 | PTA1 | bidirectional | Port A bit 1 GPIO, with TSI0_CH2, UART0_RX and TPM2_CH0 functions listed for this pin. |
| 19 | PTA2 | bidirectional | Port A bit 2 GPIO, with TSI0_CH3, UART0_TX and TPM2_CH1 functions listed for this pin. |
| 20 | PTA3 | bidirectional | Port A bit 3 GPIO, with SWD_DIO debug data and TSI0_CH4, I2C1_SCL and TPM0_CH0 functions listed for this pin. |
| 21 | PTA4 | bidirectional | Port A bit 4 GPIO, with NMI_b non-maskable interrupt and TSI0_CH5, I2C1_SDA and TPM0_CH1 functions listed for this pin. |
| 22 | VDD | power_in | Digital supply pin; the device voltage range is 1.71 to 3.6 V. |
| 23 | VSS | power_in | Digital ground pin. |
| 24 | PTA18 | bidirectional | Port A bit 18 GPIO; default function is EXTAL0 oscillator input, with UART1_RX and TPM_CLKIN0 alternate functions. |
| 25 | PTA19 | bidirectional | Port A bit 19 GPIO; default function is XTAL0 oscillator output, with UART1_TX, TPM_CLKIN1 and LPTMR0_ALT1 alternate functions. |
| 26 | PTA20 | input | Default function is RESET_b, the device reset pin; the same pin can also be used as GPIO PTA20. |
| 27 | PTB0/LLWU_P5 | bidirectional | Port B bit 0 GPIO, with ADC0_SE8/TSI0_CH0 analog function, LLWU_P5 wakeup input, and I2C0_SCL and TPM1_CH0 alternate functions. |
| 28 | PTB1 | bidirectional | Port B bit 1 GPIO, with ADC0_SE9/TSI0_CH6 analog function and I2C0_SDA and TPM1_CH1 alternate functions. |
| 29 | PTB2 | bidirectional | Port B bit 2 GPIO, with ADC0_SE12/TSI0_CH7 analog function and I2C0_SCL and TPM2_CH0 alternate functions. |
| 30 | PTB3 | bidirectional | Port B bit 3 GPIO, with ADC0_SE13/TSI0_CH8 analog function and I2C0_SDA and TPM2_CH1 alternate functions. |
| 31 | PTB16 | bidirectional | Port B bit 16 GPIO, with TSI0_CH9 function and SPI1_MOSI, SPI1_MISO, UART0_RX and TPM_CLKIN0 alternate functions. |
| 32 | PTB17 | bidirectional | Port B bit 17 GPIO, with TSI0_CH10 function and SPI1_MISO, SPI1_MOSI, UART0_TX and TPM_CLKIN1 alternate functions. |
| 33 | PTC0 | bidirectional | Port C bit 0 GPIO, with ADC0_SE14/TSI0_CH13 analog function and EXTRG_IN and CMP0_OUT alternate functions. |
| 34 | PTC1/LLWU_P6/RTC_CLKIN | bidirectional | Port C bit 1 GPIO, with ADC0_SE15/TSI0_CH14 analog function, LLWU_P6 wakeup input, RTC_CLKIN, and I2C1_SCL and TPM0_CH0 alternate functions. |
| 35 | PTC2 | bidirectional | Port C bit 2 GPIO, with ADC0_SE11/TSI0_CH15 analog function and I2C1_SDA and TPM0_CH1 alternate functions. |
| 36 | PTC3/LLWU_P7 | bidirectional | Port C bit 3 GPIO, with LLWU_P7 wakeup input and UART1_RX, TPM0_CH2 and CLKOUT alternate functions. |
| 37 | PTC4/LLWU_P8 | bidirectional | Port C bit 4 GPIO, with LLWU_P8 wakeup input and SPI0_PCS0, UART1_TX and TPM0_CH3 alternate functions. |
| 38 | PTC5/LLWU_P9 | bidirectional | Port C bit 5 GPIO, with LLWU_P9 wakeup input and SPI0_SCK, LPTMR0_ALT2 and CMP0_OUT alternate functions. |
| 39 | PTC6/LLWU_P10 | bidirectional | Port C bit 6 GPIO, with CMP0_IN0 analog input, LLWU_P10 wakeup input, and SPI0_MOSI, EXTRG_IN and SPI0_MISO alternate functions. |
| 40 | PTC7 | bidirectional | Port C bit 7 GPIO, with CMP0_IN1 analog input and SPI0_MISO and SPI0_MOSI alternate functions. |
| 41 | PTD0 | bidirectional | Port D bit 0 GPIO, with SPI0_PCS0 and TPM0_CH0 alternate functions. |
| 42 | PTD1 | bidirectional | Port D bit 1 GPIO, with ADC0_SE5b analog function and SPI0_SCK and TPM0_CH1 alternate functions. |
| 43 | PTD2 | bidirectional | Port D bit 2 GPIO, with SPI0_MOSI, UART2_RX, TPM0_CH2 and SPI0_MISO alternate functions. |
| 44 | PTD3 | bidirectional | Port D bit 3 GPIO, with SPI0_MISO, UART2_TX, TPM0_CH3 and SPI0_MOSI alternate functions. |
| 45 | PTD4/LLWU_P14 | bidirectional | Port D bit 4 GPIO, with LLWU_P14 wakeup input and SPI1_PCS0, UART2_RX and TPM0_CH4 alternate functions. |
| 46 | PTD5 | bidirectional | Port D bit 5 GPIO, with ADC0_SE6b analog function and SPI1_SCK, UART2_TX and TPM0_CH5 alternate functions. |
| 47 | PTD6/LLWU_P15 | bidirectional | Port D bit 6 GPIO, with ADC0_SE7b analog function, LLWU_P15 wakeup input, and SPI1_MOSI, UART0_RX and SPI1_MISO alternate functions. |
| 48 | PTD7 | bidirectional | Port D bit 7 GPIO, with SPI1_MISO, UART0_TX and SPI1_MOSI alternate functions. |
| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | QFN-48-EP(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 49 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | TSTG | -55 | 150 | °C | 5 | ||
| Solder temperature, lead-free | TSDR | 260 | °C | 5 | |||
| Electrostatic discharge voltage, human body model | VHBM | -2000 | 2000 | V | 5 | ||
| Electrostatic discharge voltage, charged-device model | VCDM | -500 | 500 | V | 5 | ||
| Latch-up current | ILAT | -100 | 100 | mA | Ambient temperature of 105 °C | 5 | |
| Digital supply voltage | VDD | -0.3 | 3.8 | V | 6 | ||
| Digital supply current | IDD | 120 | mA | 6 | |||
| Instantaneous maximum current single pin limit | ID | -25 | 25 | mA | Applies to all port pins | 6 | |
| USB_DP input voltage | VUSB_DP | -0.3 | 3.63 | V | 6 | ||
| USB_DM input voltage | VUSB_DM | -0.3 | 3.63 | V | 6 | ||
| USB regulator input | VREGIN | -0.3 | 6 | V | 6 | ||
| Supply voltage | VDD | 1.71 | 3.6 | V | 7 | ||
| Analog supply voltage | VDDA | 1.71 | 3.6 | V | 7 | ||
| VDD-to-VDDA differential voltage | VDD, VDDA | -0.1 | 0.1 | V | 7 | ||
| VSS-to-VSSA differential voltage | VSS, VSSA | -0.1 | 0.1 | V | 7 | ||
| Flash write voltage range | 1.71 | 3.6 | V | 2 | |||
| Temperature range (ambient) | -40 | 105 | °C | 2 | |||
| IO pin negative DC injection current, single pin | IICIO | -3 | mA | VIN < VSS-0.3V | 7 | ||
| Contiguous pin DC injection current, regional limit | IICcont | -25 | mA | Negative current injection; includes sum of negative injection currents of 16 contiguous pins | 7 | ||
| VDD voltage required to retain RAM | VRAM | 1.2 | V | 7 | |||
| Falling VDD POR detect voltage | VPOR | 0.8 | 1.1 | 1.5 | V | 7 | |
| Total deviation of trimmed average DCO output frequency over voltage and temperature | Δfdco_t | -3 | 3 | %fdco | Over voltage and temperature | 22 | |
| Total deviation of trimmed average DCO output frequency over fixed voltage and temperature range | Δfdco_t | -1.5 | 0.4 | 1.5 | %fdco | Fixed voltage and temperature range of 0-70 °C | 22 |
| Frequency deviation of internal reference clock (fast clock) over temperature and voltage | Δfintf_ft | -3 | 3 | %fintf_ft | Factory trimmed at nominal VDD and 25 °C | 22 | |
| Internal reference frequency (fast clock) | fintf_t | 3 | 5 | MHz | User trimmed at nominal VDD and 25 °C | 22 | |
| FLL reference frequency range | ffll_ref | 31.25 | 39.0625 | kHz | 22 | ||
| DCO output frequency range | fdco | 20 | 20.97 | 25 | MHz | Low range (DRS = 00); 640 × ffll_ref | 22 |
| DCO output frequency range | fdco | 40 | 41.94 | 48 | MHz | Mid range (DRS = 01); 1280 × ffll_ref | 22 |
| FLL target frequency acquisition time | tfll_acquire | 1 | ms | 22 | |||
| VCO operating frequency | fvco | 48 | 100 | MHz | 22 | ||
| PLL reference frequency range | fpll_ref | 2 | 4 | MHz | 22 | ||
| Oscillator crystal or resonator frequency, low-frequency mode | fosc_lo | 32 | 40 | kHz | MCG_C2[RANGE]=00 | 25 | |
| Oscillator crystal or resonator frequency, high-frequency mode (low range) | fosc_hi_1 | 3 | 8 | MHz | MCG_C2[RANGE]=01 | 25 | |
| Oscillator crystal or resonator frequency, high-frequency mode (high range) | fosc_hi_2 | 8 | 32 | MHz | MCG_C2[RANGE]=1x | 25 | |
| Input clock frequency (external clock mode) | fec_extal | 48 | MHz | 25 | |||
| Input clock duty cycle (external clock mode) | tdc_extal | 40 | 50 | 60 | % | 25 | |
| Supply current, high-speed mode | IDDHS | 200 | μA | EN = 1, PMODE = 1 | 32 | ||
| Supply current, low-speed mode | IDDLS | 20 | μA | EN = 1, PMODE = 0 | 32 | ||
| Analog input offset voltage | VAIO | 20 | mV | 32 | |||
| Output low | VCMPOl | 0.5 | V | 32 | |||
| Analog comparator initialization delay | 40 | μs | 32 | ||||
| 6-bit DAC integral non-linearity | INL | -0.5 | 0.5 | LSB | 32 | ||
| 6-bit DAC differential non-linearity | DNL | -0.3 | 0.3 | LSB | 32 | ||
| Longword Program high-voltage time | thvpgm4 | 7.5 | 18 | μs | 26 | ||
| Sector Erase high-voltage time | thversscr | 13 | 113 | ms | 26 | ||
| Erase All high-voltage time | thversall | 52 | 452 | ms | 26 | ||
| Read 1s Section execution time (flash sector) | trd1sec1k | 60 | μs | Assumes 25 MHz flash clock frequency | 26 | ||
| Program Check execution time | tpgmchk | 45 | μs | Assumes 25 MHz flash clock frequency | 26 | ||
| Read Resource execution time | trdrsrc | 30 | μs | Assumes 25 MHz flash clock frequency | 26 | ||
| Program Longword execution time | tpgm4 | 65 | 145 | μs | 26 | ||
| Erase Flash Sector execution time | tersscr | 14 | 114 | ms | 26 | ||
| Read 1s All Blocks execution time | trd1all | 1.8 | ms | 26 | |||
| Read Once execution time | trdonce | 25 | μs | Assumes 25 MHz flash clock frequency | 26 | ||
| Erase All Blocks execution time | tersall | 88 | 650 | ms | 26 | ||
| Verify Backdoor Access Key execution time | tvfykey | 30 | μs | Assumes 25 MHz flash clock frequency | 26 | ||
| Average current adder during high voltage flash programming operation | IDD_PGM | 2.5 | 6 | mA | 26 | ||
| Average current adder during high voltage flash erase operation | IDD_ERS | 1.5 | 4 | mA | 26 | ||
| Lock entry frequency tolerance | Dlock | -1.49 | 2.98 | % | 23 | ||
| Lock exit frequency tolerance | Dunl | -4.47 | 5.97 | % | 23 |
CAD (KiCad official)
- Symbol:
MKL25Z128VFT4 - Footprint:
Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm - 3D model: QFN-48-EP(7x7) (KiCad packages3D, STEP)
- 3D model files:
mkl25z128vft4-etched.step/mkl25z128vft4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mkl25z128vft4.step/mkl25z128vft4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (59 pp, sha256
e42271b7f612ac1b, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MKL25Z128VFT4
**NXP Semicon** · Pre-ordered MCUs · QFN-48-EP(7x7)
MKL25Z128VFT4 from NXP Semicon, in a QFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Digital supply pin; the device voltage range is 1.71 to 3.6 V. |
| 2 | VSS | power_in | Digital ground pin. |
| 3 | USB0_DP | bidirectional | USB full-/low-speed D+ data line of the on-chip USB On-the-Go transceiver. |
| 4 | USB0_DM | bidirectional | USB full-/low-speed D- data line of the on-chip USB On-the-Go transceiver. |
| 5 | VOUT33 | power_out | 3.3 V output of the on-chip USB 5 V to 3.3 V regulator. |
| 6 | VREGIN | power_in | Input supply to the on-chip USB 5 V to 3.3 V regulator. |
| 7 | PTE20 | bidirectional | Port E bit 20 GPIO, with ADC0_DP0/ADC0_SE0 analog function and TPM1_CH0 and UART0_TX alternate functions. |
| 8 | PTE21 | bidirectional | Port E bit 21 GPIO, with ADC0_DM0/ADC0_SE4a analog function and TPM1_CH1 and UART0_RX alternate functions. |
| 9 | VDDA | power_in | Analog supply pin. |
| 10 | VREFH | power_in | High-side voltage reference pin (VREFH). |
| 11 | VREFL | power_in | Low-side voltage reference pin (VREFL). |
| 12 | VSSA | power_in | Analog ground pin. |
| 13 | PTE29 | bidirectional | Port E bit 29 GPIO, with CMP0_IN5/ADC0_SE4b analog input and TPM0_CH2 and TPM_CLKIN0 alternate functions. |
| 14 | PTE30 | bidirectional | Port E bit 30 GPIO, with DAC0_OUT/ADC0_SE23/CMP0_IN4 analog function and TPM0_CH3 and TPM_CLKIN1 alternate functions. |
| 15 | PTE24 | bidirectional | Port E bit 24 GPIO, with TPM0_CH0 and I2C0_SCL alternate functions. |
| 16 | PTE25 | bidirectional | Port E bit 25 GPIO, with TPM0_CH1 and I2C0_SDA alternate functions. |
| 17 | PTA0 | bidirectional | Port A bit 0 GPIO, with SWD_CLK debug clock and TSI0_CH1 and TPM0_CH5 functions listed for this pin. |
| 18 | PTA1 | bidirectional | Port A bit 1 GPIO, with TSI0_CH2, UART0_RX and TPM2_CH0 functions listed for this pin. |
| 19 | PTA2 | bidirectional | Port A bit 2 GPIO, with TSI0_CH3, UART0_TX and TPM2_CH1 functions listed for this pin. |
| 20 | PTA3 | bidirectional | Port A bit 3 GPIO, with SWD_DIO debug data and TSI0_CH4, I2C1_SCL and TPM0_CH0 functions listed for this pin. |
| 21 | PTA4 | bidirectional | Port A bit 4 GPIO, with NMI_b non-maskable interrupt and TSI0_CH5, I2C1_SDA and TPM0_CH1 functions listed for this pin. |
| 22 | VDD | power_in | Digital supply pin; the device voltage range is 1.71 to 3.6 V. |
| 23 | VSS | power_in | Digital ground pin. |
| 24 | PTA18 | bidirectional | Port A bit 18 GPIO; default function is EXTAL0 oscillator input, with UART1_RX and TPM_CLKIN0 alternate functions. |
| 25 | PTA19 | bidirectional | Port A bit 19 GPIO; default function is XTAL0 oscillator output, with UART1_TX, TPM_CLKIN1 and LPTMR0_ALT1 alternate functions. |
| 26 | PTA20 | input | Default function is RESET_b, the device reset pin; the same pin can also be used as GPIO PTA20. |
| 27 | PTB0/LLWU_P5 | bidirectional | Port B bit 0 GPIO, with ADC0_SE8/TSI0_CH0 analog function, LLWU_P5 wakeup input, and I2C0_SCL and TPM1_CH0 alternate functions. |
| 28 | PTB1 | bidirectional | Port B bit 1 GPIO, with ADC0_SE9/TSI0_CH6 analog function and I2C0_SDA and TPM1_CH1 alternate functions. |
| 29 | PTB2 | bidirectional | Port B bit 2 GPIO, with ADC0_SE12/TSI0_CH7 analog function and I2C0_SCL and TPM2_CH0 alternate functions. |
| 30 | PTB3 | bidirectional | Port B bit 3 GPIO, with ADC0_SE13/TSI0_CH8 analog function and I2C0_SDA and TPM2_CH1 alternate functions. |
| 31 | PTB16 | bidirectional | Port B bit 16 GPIO, with TSI0_CH9 function and SPI1_MOSI, SPI1_MISO, UART0_RX and TPM_CLKIN0 alternate functions. |
| 32 | PTB17 | bidirectional | Port B bit 17 GPIO, with TSI0_CH10 function and SPI1_MISO, SPI1_MOSI, UART0_TX and TPM_CLKIN1 alternate functions. |
| 33 | PTC0 | bidirectional | Port C bit 0 GPIO, with ADC0_SE14/TSI0_CH13 analog function and EXTRG_IN and CMP0_OUT alternate functions. |
| 34 | PTC1/LLWU_P6/RTC_CLKIN | bidirectional | Port C bit 1 GPIO, with ADC0_SE15/TSI0_CH14 analog function, LLWU_P6 wakeup input, RTC_CLKIN, and I2C1_SCL and TPM0_CH0 alternate functions. |
| 35 | PTC2 | bidirectional | Port C bit 2 GPIO, with ADC0_SE11/TSI0_CH15 analog function and I2C1_SDA and TPM0_CH1 alternate functions. |
| 36 | PTC3/LLWU_P7 | bidirectional | Port C bit 3 GPIO, with LLWU_P7 wakeup input and UART1_RX, TPM0_CH2 and CLKOUT alternate functions. |
| 37 | PTC4/LLWU_P8 | bidirectional | Port C bit 4 GPIO, with LLWU_P8 wakeup input and SPI0_PCS0, UART1_TX and TPM0_CH3 alternate functions. |
| 38 | PTC5/LLWU_P9 | bidirectional | Port C bit 5 GPIO, with LLWU_P9 wakeup input and SPI0_SCK, LPTMR0_ALT2 and CMP0_OUT alternate functions. |
| 39 | PTC6/LLWU_P10 | bidirectional | Port C bit 6 GPIO, with CMP0_IN0 analog input, LLWU_P10 wakeup input, and SPI0_MOSI, EXTRG_IN and SPI0_MISO alternate functions. |
| 40 | PTC7 | bidirectional | Port C bit 7 GPIO, with CMP0_IN1 analog input and SPI0_MISO and SPI0_MOSI alternate functions. |
| 41 | PTD0 | bidirectional | Port D bit 0 GPIO, with SPI0_PCS0 and TPM0_CH0 alternate functions. |
| 42 | PTD1 | bidirectional | Port D bit 1 GPIO, with ADC0_SE5b analog function and SPI0_SCK and TPM0_CH1 alternate functions. |
| 43 | PTD2 | bidirectional | Port D bit 2 GPIO, with SPI0_MOSI, UART2_RX, TPM0_CH2 and SPI0_MISO alternate functions. |
| 44 | PTD3 | bidirectional | Port D bit 3 GPIO, with SPI0_MISO, UART2_TX, TPM0_CH3 and SPI0_MOSI alternate functions. |
| 45 | PTD4/LLWU_P14 | bidirectional | Port D bit 4 GPIO, with LLWU_P14 wakeup input and SPI1_PCS0, UART2_RX and TPM0_CH4 alternate functions. |
| 46 | PTD5 | bidirectional | Port D bit 5 GPIO, with ADC0_SE6b analog function and SPI1_SCK, UART2_TX and TPM0_CH5 alternate functions. |
| 47 | PTD6/LLWU_P15 | bidirectional | Port D bit 6 GPIO, with ADC0_SE7b analog function, LLWU_P15 wakeup input, and SPI1_MOSI, UART0_RX and SPI1_MISO alternate functions. |
| 48 | PTD7 | bidirectional | Port D bit 7 GPIO, with SPI1_MISO, UART0_TX and SPI1_MOSI alternate functions. |
| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | QFN-48-EP(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 49 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | TSTG | -55 | | 150 | °C | | 5 |
| Solder temperature, lead-free | TSDR | | | 260 | °C | | 5 |
| Electrostatic discharge voltage, human body model | VHBM | -2000 | | 2000 | V | | 5 |
| Electrostatic discharge voltage, charged-device model | VCDM | -500 | | 500 | V | | 5 |
| Latch-up current | ILAT | -100 | | 100 | mA | Ambient temperature of 105 °C | 5 |
| Digital supply voltage | VDD | -0.3 | | 3.8 | V | | 6 |
| Digital supply current | IDD | | | 120 | mA | | 6 |
| Instantaneous maximum current single pin limit | ID | -25 | | 25 | mA | Applies to all port pins | 6 |
| USB_DP input voltage | VUSB_DP | -0.3 | | 3.63 | V | | 6 |
| USB_DM input voltage | VUSB_DM | -0.3 | | 3.63 | V | | 6 |
| USB regulator input | VREGIN | -0.3 | | 6 | V | | 6 |
| Supply voltage | VDD | 1.71 | | 3.6 | V | | 7 |
| Analog supply voltage | VDDA | 1.71 | | 3.6 | V | | 7 |
| VDD-to-VDDA differential voltage | VDD, VDDA | -0.1 | | 0.1 | V | | 7 |
| VSS-to-VSSA differential voltage | VSS, VSSA | -0.1 | | 0.1 | V | | 7 |
| Flash write voltage range | | 1.71 | | 3.6 | V | | 2 |
| Temperature range (ambient) | | -40 | | 105 | °C | | 2 |
| IO pin negative DC injection current, single pin | IICIO | -3 | | | mA | VIN < VSS-0.3V | 7 |
| Contiguous pin DC injection current, regional limit | IICcont | -25 | | | mA | Negative current injection; includes sum of negative injection currents of 16 contiguous pins | 7 |
| VDD voltage required to retain RAM | VRAM | 1.2 | | | V | | 7 |
| Falling VDD POR detect voltage | VPOR | 0.8 | 1.1 | 1.5 | V | | 7 |
| Total deviation of trimmed average DCO output frequency over voltage and temperature | Δfdco_t | -3 | | 3 | %fdco | Over voltage and temperature | 22 |
| Total deviation of trimmed average DCO output frequency over fixed voltage and temperature range | Δfdco_t | -1.5 | 0.4 | 1.5 | %fdco | Fixed voltage and temperature range of 0-70 °C | 22 |
| Frequency deviation of internal reference clock (fast clock) over temperature and voltage | Δfintf_ft | -3 | | 3 | %fintf_ft | Factory trimmed at nominal VDD and 25 °C | 22 |
| Internal reference frequency (fast clock) | fintf_t | 3 | | 5 | MHz | User trimmed at nominal VDD and 25 °C | 22 |
| FLL reference frequency range | ffll_ref | 31.25 | | 39.0625 | kHz | | 22 |
| DCO output frequency range | fdco | 20 | 20.97 | 25 | MHz | Low range (DRS = 00); 640 × ffll_ref | 22 |
| DCO output frequency range | fdco | 40 | 41.94 | 48 | MHz | Mid range (DRS = 01); 1280 × ffll_ref | 22 |
| FLL target frequency acquisition time | tfll_acquire | | | 1 | ms | | 22 |
| VCO operating frequency | fvco | 48 | | 100 | MHz | | 22 |
| PLL reference frequency range | fpll_ref | 2 | | 4 | MHz | | 22 |
| Oscillator crystal or resonator frequency, low-frequency mode | fosc_lo | 32 | | 40 | kHz | MCG_C2[RANGE]=00 | 25 |
| Oscillator crystal or resonator frequency, high-frequency mode (low range) | fosc_hi_1 | 3 | | 8 | MHz | MCG_C2[RANGE]=01 | 25 |
| Oscillator crystal or resonator frequency, high-frequency mode (high range) | fosc_hi_2 | 8 | | 32 | MHz | MCG_C2[RANGE]=1x | 25 |
| Input clock frequency (external clock mode) | fec_extal | | | 48 | MHz | | 25 |
| Input clock duty cycle (external clock mode) | tdc_extal | 40 | 50 | 60 | % | | 25 |
| Supply current, high-speed mode | IDDHS | | | 200 | μA | EN = 1, PMODE = 1 | 32 |
| Supply current, low-speed mode | IDDLS | | | 20 | μA | EN = 1, PMODE = 0 | 32 |
| Analog input offset voltage | VAIO | | | 20 | mV | | 32 |
| Output low | VCMPOl | | | 0.5 | V | | 32 |
| Analog comparator initialization delay | | | | 40 | μs | | 32 |
| 6-bit DAC integral non-linearity | INL | -0.5 | | 0.5 | LSB | | 32 |
| 6-bit DAC differential non-linearity | DNL | -0.3 | | 0.3 | LSB | | 32 |
| Longword Program high-voltage time | thvpgm4 | | 7.5 | 18 | μs | | 26 |
| Sector Erase high-voltage time | thversscr | | 13 | 113 | ms | | 26 |
| Erase All high-voltage time | thversall | | 52 | 452 | ms | | 26 |
| Read 1s Section execution time (flash sector) | trd1sec1k | | | 60 | μs | Assumes 25 MHz flash clock frequency | 26 |
| Program Check execution time | tpgmchk | | | 45 | μs | Assumes 25 MHz flash clock frequency | 26 |
| Read Resource execution time | trdrsrc | | | 30 | μs | Assumes 25 MHz flash clock frequency | 26 |
| Program Longword execution time | tpgm4 | | 65 | 145 | μs | | 26 |
| Erase Flash Sector execution time | tersscr | | 14 | 114 | ms | | 26 |
| Read 1s All Blocks execution time | trd1all | | | 1.8 | ms | | 26 |
| Read Once execution time | trdonce | | | 25 | μs | Assumes 25 MHz flash clock frequency | 26 |
| Erase All Blocks execution time | tersall | | 88 | 650 | ms | | 26 |
| Verify Backdoor Access Key execution time | tvfykey | | | 30 | μs | Assumes 25 MHz flash clock frequency | 26 |
| Average current adder during high voltage flash programming operation | IDD_PGM | | 2.5 | 6 | mA | | 26 |
| Average current adder during high voltage flash erase operation | IDD_ERS | | 1.5 | 4 | mA | | 26 |
| Lock entry frequency tolerance | Dlock | -1.49 | | 2.98 | % | | 23 |
| Lock exit frequency tolerance | Dunl | -4.47 | | 5.97 | % | | 23 |
## CAD (KiCad official)
- Symbol: `MKL25Z128VFT4`
- Footprint: `Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm`
- 3D model: QFN-48-EP(7x7) (KiCad packages3D, STEP)
- 3D model files: `mkl25z128vft4-etched.step` / `mkl25z128vft4-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mkl25z128vft4.step` / `mkl25z128vft4.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [NXP Semicon datasheet](https://www.nxp.com/docs/en/data-sheet/KL25P80M48SF0.pdf) (59 pp, sha256 `e42271b7f612ac1b`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mkl25z128vft4-datasheet.pdf)