main
Ray
Publish 0.1.0
e646b7f
MKL17Z256VFM4
NXP Semicon · Pre-ordered MCUs · QFN-32-EP(5x5)
MKL17Z256VFM4 from NXP Semicon, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTE0 | bidirectional | Port E bit 0 GPIO with default function DISABLED; the signal multiplexing table lists CLKOUT32K, SPI1_MISO, LPUART1_TX, RTC_CLKOUT, CMP0_OUT and I2C1_SDA as alternate functions. |
| 2 | PTE1 | bidirectional | Port E bit 1 GPIO with default function DISABLED; alternate functions include SPI1_MOSI, LPUART1_RX, SPI1_MISO and I2C1_SCL. |
| 3 | PTE16 | bidirectional | Port E bit 16 GPIO whose default function is ADC0_DP1/ADC0_SE1; alternate functions include SPI0_PCS0, UART2_TX, TPM_CLKIN0 and FXI00_D0. |
| 4 | PTE17 | bidirectional | Port E bit 17 GPIO whose default function is ADC0_DM1/ADC0_SE5a; alternate functions include SPI0_SCK, UART2_RX, TPM_CLKIN1, LPTMR0_ALT3 and FXIO0_D1. |
| 5 | PTE18 | bidirectional | Port E bit 18 GPIO whose default function is ADC0_DP2/ADC0_SE2; alternate functions include SPI0_MOSI, I2C0_SDA, SPI0_MISO and FXIO0_D2. |
| 6 | PTE19 | bidirectional | Port E bit 19 GPIO whose default function is ADC0_DM2/ADC0_SE6a; alternate functions include SPI0_MISO, I2C0_SCL, SPI0_MOSI and FXIO0_D3. |
| 7 | VDDA | power_in | Analog supply pin; the datasheet says it must always be connected to the VDD potential. |
| 8 | VSSA | power_in | Analog ground pin; the datasheet says it must always be connected to the VSS potential. |
| 9 | PTE30 | bidirectional | Port E bit 30 GPIO whose default function is DAC0_OUT/ADC0_SE23/CMP0_IN4; alternate functions include TPM0_CH3, TPM_CLKIN1, LPUART1_TX and LPTMR0_ALT1. |
| 10 | PTA0 | bidirectional | Port A bit 0 GPIO whose default function is SWD_CLK (Serial Wire Debug clock); the datasheet recommends leaving it floating when unused (default SWD with pulldown). |
| 11 | PTA1 | bidirectional | Port A bit 1 GPIO with default function DISABLED; alternate functions include LPUART0_RX and TPM2_CH0. |
| 12 | PTA2 | bidirectional | Port A bit 2 GPIO with default function DISABLED; alternate functions include LPUART0_TX and TPM2_CH1. |
| 13 | PTA3 | bidirectional | Port A bit 3 GPIO whose default function is SWD_DIO (Serial Wire Debug data); the datasheet recommends leaving it floating when unused (default SWD with pullup). |
| 14 | PTA4 | bidirectional | Port A bit 4 GPIO whose default function is NMI_b; the datasheet recommends a 10 kΩ pullup or disabling the pin in PCR and FOPT and leaving it floating. |
| 15 | VDD | power_in | Digital supply pin; the device operating voltage range is 1.71 to 3.6 V. |
| 16 | VSS | power_in | Digital ground pin. |
| 17 | PTA18 | bidirectional | Port A bit 18 whose default function is EXTAL0 (oscillator input); the datasheet recommends leaving it floating when the analog interface is unused; alternate functions include LPUART1_RX and TPM_CLKIN0. |
| 18 | PTA19 | bidirectional | Port A bit 19 whose default function is XTAL0 (oscillator output); the datasheet recommends leaving it floating when unused; alternate functions include LPUART1_TX, TPM_CLKIN1 and LPTMR0_ALT1. |
| 19 | PTA20 | bidirectional | Port A bit 20 whose default function is RESET_b (device reset); alternate function is also RESET_b. |
| 20 | PTB0/LLWU_P5 | bidirectional | Port B bit 0 GPIO with LLWU wakeup input P5; default function is ADC0_SE8, and alternate functions include I2C0_SCL and TPM1_CH0. |
| 21 | PTB1 | bidirectional | Port B bit 1 GPIO whose default function is ADC0_SE9; alternate functions include I2C0_SDA and TPM1_CH1. |
| 22 | PTC1/LLWU_P6/RTC_CLKIN | bidirectional | Port C bit 1 GPIO with LLWU wakeup input P6 and RTC clock input; default function is ADC0_SE15, and alternate functions include I2C1_SCL, TPM0_CH0 and I2S0_TXD0. |
| 23 | PTC2 | bidirectional | Port C bit 2 GPIO whose default function is ADC0_SE11; alternate functions include I2C1_SDA, TPM0_CH1 and I2S0_TX_FS. |
| 24 | PTC3/LLWU_P7 | bidirectional | Port C bit 3 GPIO with LLWU wakeup input P7 and default function DISABLED; alternate functions include SPI1_SCK, LPUART1_RX, TPM0_CH2, CLKOUT and I2S0_TX_BCLK. |
| 25 | PTC4/LLWU_P8 | bidirectional | Port C bit 4 GPIO with LLWU wakeup input P8 and default function DISABLED; alternate functions include SPI0_PCS0, LPUART1_TX, TPM0_CH3 and I2S0_MCLK. |
| 26 | PTC5/LLWU_P9 | bidirectional | Port C bit 5 GPIO with LLWU wakeup input P9 and default function DISABLED; alternate functions include SPI0_SCK, LPTMR0_ALT2, I2S0_RXD0 and CMP0_OUT. |
| 27 | PTC6/LLWU_P10 | bidirectional | Port C bit 6 GPIO with LLWU wakeup input P10; default function is CMP0_IN0 (comparator input), and alternate functions include SPI0_MOSI, EXTRG_IN, I2S0_RX_BCLK, SPI0_MISO and I2S0_MCLK. |
| 28 | PTC7 | bidirectional | Port C bit 7 GPIO whose default function is CMP0_IN1 (comparator input); alternate functions include SPI0_MISO, audioUSB_SOF_OUT, I2S0_RX_FS and SPI0_MOSI. |
| 29 | PTD4/LLWU_P14 | bidirectional | Port D bit 4 GPIO with LLWU wakeup input P14 and default function DISABLED; alternate functions include SPI1_PCS0, UART2_RX, TPM0_CH4 and FXI00_D4. |
| 30 | PTD5 | bidirectional | Port D bit 5 GPIO whose default function is ADC0_SE6b; alternate functions include SPI1_SCK, UART2_TX, TPM0_CH5 and FXIO0_D5. |
| 31 | PTD6/LLWU_P15 | bidirectional | Port D bit 6 GPIO with LLWU wakeup input P15; default function is ADC0_SE7b, and alternate functions include SPI1_MOSI, LPUART0_RX, SPI1_MISO and FXIO0_D6. |
| 32 | PTD7 | bidirectional | Port D bit 7 GPIO with default function DISABLED; alternate functions include SPI1_MISO, LPUART0_TX, SPI1_MOSI and FXIO0_D7. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | QFN-32-EP(5x5) |
| Category | Embedded Processors & Controllers |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | TSTG | -55 | 150 | °C | 5 | ||
| Solder temperature, lead-free | TSDR | 260 | °C | 5 | |||
| Electrostatic discharge voltage, human body model | VHBM | -2000 | 2000 | V | Human body model | 5 | |
| Electrostatic discharge voltage, charged-device model | VCDM | -500 | 500 | V | Charged-device model | 5 | |
| Latch-up current at ambient temperature of 105 °C | ILAT | -100 | 100 | mA | Ambient temperature of 105 °C | 5 | |
| Digital supply voltage | VDD | -0.3 | 3.8 | V | 6 | ||
| Digital supply current | IDD | 120 | mA | 6 | |||
| IO pin input voltage (maximum printed as VDD + 0.3 V) | VIO | -0.3 | V | Maximum printed as VDD + 0.3 V | 6 | ||
| Instantaneous maximum current single pin limit (applies to all port pins) | ID | -25 | 25 | mA | Single pin limit, all port pins | 6 | |
| Supply voltage | VDD | 1.71 | 3.6 | V | 7 | ||
| Analog supply voltage | VDDA | 1.71 | 3.6 | V | 7 | ||
| VDD-to-VDDA differential voltage | VDD, VDDA | -0.1 | 0.1 | V | 7 | ||
| VSS-to-VSSA differential voltage | VSS, VSSA | -0.1 | 0.1 | V | 7 | ||
| Input high voltage | VIH | 0.7 | × VDD | 2.7 V ≤ VDD ≤ 3.6 V | 7 | ||
| Input high voltage | VIH | 0.75 | × VDD | 1.7 V ≤ VDD ≤ 2.7 V | 7 | ||
| Input low voltage | VIL | 0.35 | × VDD | 2.7 V ≤ VDD ≤ 3.6 V | 7 | ||
| Input low voltage | VIL | 0.3 | × VDD | 1.7 V ≤ VDD ≤ 2.7 V | 7 | ||
| Input hysteresis | VHYS | 0.06 | × VDD | 7 | |||
| IO pin negative DC injection current, single pin | IICIO | -3 | mA | Single pin, VIN < VSS-0.3V | 7 | ||
| Contiguous pin DC injection current, regional limit, includes sum of negative injection currents of 16 contiguous pins | IICcont | -25 | mA | Negative current injection | 7 | ||
| VDD voltage required to retain RAM | VRAM | 1.2 | V | 7 | |||
| Temperature range | -40 | 105 | °C | Packages other than WLCSP (includes 32 QFN) | 2 | ||
| Falling VDD POR detect voltage | VPOR | 0.8 | 1.1 | 1.5 | V | 7 | |
| Falling low-voltage detect threshold, high range | VLVDH | 2.48 | 2.56 | 2.64 | V | LVDV = 01 | 7 |
| Oscillator crystal or resonator frequency, low-frequency mode | fosc_lo | 32 | 40 | kHz | MCG_C2[RANGE]=00 | 29 | |
| Oscillator crystal or resonator frequency, high-frequency mode (low range) | fosc_hi_1 | 3 | 8 | MHz | MCG_C2[RANGE]=01 | 29 | |
| Oscillator crystal or resonator frequency, high frequency mode (high range) | fosc_hi_2 | 8 | 32 | MHz | MCG_C2[RANGE]=1x | 29 | |
| Input clock frequency (external clock mode) | fec_extal | 48 | MHz | External clock mode | 29 | ||
| Input clock duty cycle (external clock mode) | tdc_extal | 40 | 50 | 60 | % | External clock mode | 29 |
| Longword Program high-voltage time | thvpgm4 | 7.5 | 18 | μs | 30 | ||
| Sector Erase high-voltage time | thversscr | 13 | 113 | ms | 30 | ||
| Erase Block high-voltage time for 128 KB | thversblk128k | 52 | 452 | ms | 30 | ||
| Read 1s Block execution time, 128 KB program flash | trd1blk128k | 1.7 | ms | 30 | |||
| Program Longword execution time | tpgm4 | 65 | 145 | μs | 30 | ||
| Erase Flash Block execution time, 128 KB program flash | tersblk128k | 88 | 600 | ms | 30 | ||
| Erase All Blocks execution time | tersall | 175 | 1300 | ms | 30 | ||
| Average current adder during high voltage flash programming operation | IDD_PGM | 2.5 | 6 | mA | 31 | ||
| Average current adder during high voltage flash erase operation | IDD_ERS | 1.5 | 4 | mA | 31 | ||
| Supply voltage delta to VDD (VDD, VDDA) | ΔVDDA | -100 | 0 | 100 | mV | VDD, VDDA | 32 |
| Ground voltage delta to VSS (VSS, VSSA) | ΔVSSA | -100 | 0 | 100 | mV | VSS, VSSA | 32 |
| ADC reference voltage high | VREFH | 1.13 | V | 32 | |||
| Input capacitance | CADIN | 8 | 10 | pF | 16-bit mode | 32 | |
| Input capacitance | CADIN | 4 | 5 | pF | 8-bit / 10-bit / 12-bit modes | 32 | |
| Supply current | IDDA_ADC | 0.215 | 1.7 | mA | 34 | ||
| Total unadjusted error, 12-bit modes | TUE | -6.8 | 4 | 6.8 | LSB | 12-bit modes; typ ±4 | 34 |
| Total unadjusted error, <12-bit modes | TUE | -2.1 | 1.4 | 2.1 | LSB | <12-bit modes; typ ±1.4 | 34 |
| Temp sensor slope | 1.55 | 1.62 | 1.69 | mV/°C | Across the full temperature range of the device | 35 | |
| Temp sensor voltage at 25 °C | VTEMP25 | 706 | 716 | 726 | mV | 25 °C | 35 |
| Voltage reference output with factory trim at nominal VDDA and temperature=25C | Vout | 1.1915 | 1.195 | 1.1977 | V | Nominal VDDA, temperature = 25 °C | 36 |
| Voltage reference output, factory trim | Vout | 1.1584 | 1.2376 | V | Factory trim | 36 | |
| Voltage reference output, user trim | Vout | 1.193 | 1.197 | V | User trim | 36 | |
| Reference voltage | VDACR | 1.13 | 3.6 | V | Note 1: DAC reference can be VDDA or VREFH | 40 | |
| Output load capacitance | CL | 100 | pF | 40 | |||
| Output load current | IL | 1 | mA | 40 | |||
| Supply current, low-power mode | IDDA_DACLP | 250 | μA | Low-power mode | 41 | ||
| Supply current, high-speed mode | IDDA_DACHP | 900 | μA | High-speed mode | 41 | ||
| Full-scale settling time (0x080 to 0xF7F), low-power mode | tDACLP | 100 | 200 | μs | Settling within ±1 LSB | 41 | |
| Full-scale settling time (0x080 to 0xF7F), high-power mode | tDACHP | 15 | 30 | μs | Settling within ±1 LSB | 41 |
CAD (KiCad official)
- Symbol:
MKL17Z256VFM4 - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
mkl17z256vfm4-etched.step/mkl17z256vfm4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mkl17z256vfm4.step/mkl17z256vfm4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (73 pp, sha256
1aa62c0ae73e57d3, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MKL17Z256VFM4
**NXP Semicon** · Pre-ordered MCUs · QFN-32-EP(5x5)
MKL17Z256VFM4 from NXP Semicon, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTE0 | bidirectional | Port E bit 0 GPIO with default function DISABLED; the signal multiplexing table lists CLKOUT32K, SPI1_MISO, LPUART1_TX, RTC_CLKOUT, CMP0_OUT and I2C1_SDA as alternate functions. |
| 2 | PTE1 | bidirectional | Port E bit 1 GPIO with default function DISABLED; alternate functions include SPI1_MOSI, LPUART1_RX, SPI1_MISO and I2C1_SCL. |
| 3 | PTE16 | bidirectional | Port E bit 16 GPIO whose default function is ADC0_DP1/ADC0_SE1; alternate functions include SPI0_PCS0, UART2_TX, TPM_CLKIN0 and FXI00_D0. |
| 4 | PTE17 | bidirectional | Port E bit 17 GPIO whose default function is ADC0_DM1/ADC0_SE5a; alternate functions include SPI0_SCK, UART2_RX, TPM_CLKIN1, LPTMR0_ALT3 and FXIO0_D1. |
| 5 | PTE18 | bidirectional | Port E bit 18 GPIO whose default function is ADC0_DP2/ADC0_SE2; alternate functions include SPI0_MOSI, I2C0_SDA, SPI0_MISO and FXIO0_D2. |
| 6 | PTE19 | bidirectional | Port E bit 19 GPIO whose default function is ADC0_DM2/ADC0_SE6a; alternate functions include SPI0_MISO, I2C0_SCL, SPI0_MOSI and FXIO0_D3. |
| 7 | VDDA | power_in | Analog supply pin; the datasheet says it must always be connected to the VDD potential. |
| 8 | VSSA | power_in | Analog ground pin; the datasheet says it must always be connected to the VSS potential. |
| 9 | PTE30 | bidirectional | Port E bit 30 GPIO whose default function is DAC0_OUT/ADC0_SE23/CMP0_IN4; alternate functions include TPM0_CH3, TPM_CLKIN1, LPUART1_TX and LPTMR0_ALT1. |
| 10 | PTA0 | bidirectional | Port A bit 0 GPIO whose default function is SWD_CLK (Serial Wire Debug clock); the datasheet recommends leaving it floating when unused (default SWD with pulldown). |
| 11 | PTA1 | bidirectional | Port A bit 1 GPIO with default function DISABLED; alternate functions include LPUART0_RX and TPM2_CH0. |
| 12 | PTA2 | bidirectional | Port A bit 2 GPIO with default function DISABLED; alternate functions include LPUART0_TX and TPM2_CH1. |
| 13 | PTA3 | bidirectional | Port A bit 3 GPIO whose default function is SWD_DIO (Serial Wire Debug data); the datasheet recommends leaving it floating when unused (default SWD with pullup). |
| 14 | PTA4 | bidirectional | Port A bit 4 GPIO whose default function is NMI_b; the datasheet recommends a 10 kΩ pullup or disabling the pin in PCR and FOPT and leaving it floating. |
| 15 | VDD | power_in | Digital supply pin; the device operating voltage range is 1.71 to 3.6 V. |
| 16 | VSS | power_in | Digital ground pin. |
| 17 | PTA18 | bidirectional | Port A bit 18 whose default function is EXTAL0 (oscillator input); the datasheet recommends leaving it floating when the analog interface is unused; alternate functions include LPUART1_RX and TPM_CLKIN0. |
| 18 | PTA19 | bidirectional | Port A bit 19 whose default function is XTAL0 (oscillator output); the datasheet recommends leaving it floating when unused; alternate functions include LPUART1_TX, TPM_CLKIN1 and LPTMR0_ALT1. |
| 19 | PTA20 | bidirectional | Port A bit 20 whose default function is RESET_b (device reset); alternate function is also RESET_b. |
| 20 | PTB0/LLWU_P5 | bidirectional | Port B bit 0 GPIO with LLWU wakeup input P5; default function is ADC0_SE8, and alternate functions include I2C0_SCL and TPM1_CH0. |
| 21 | PTB1 | bidirectional | Port B bit 1 GPIO whose default function is ADC0_SE9; alternate functions include I2C0_SDA and TPM1_CH1. |
| 22 | PTC1/LLWU_P6/RTC_CLKIN | bidirectional | Port C bit 1 GPIO with LLWU wakeup input P6 and RTC clock input; default function is ADC0_SE15, and alternate functions include I2C1_SCL, TPM0_CH0 and I2S0_TXD0. |
| 23 | PTC2 | bidirectional | Port C bit 2 GPIO whose default function is ADC0_SE11; alternate functions include I2C1_SDA, TPM0_CH1 and I2S0_TX_FS. |
| 24 | PTC3/LLWU_P7 | bidirectional | Port C bit 3 GPIO with LLWU wakeup input P7 and default function DISABLED; alternate functions include SPI1_SCK, LPUART1_RX, TPM0_CH2, CLKOUT and I2S0_TX_BCLK. |
| 25 | PTC4/LLWU_P8 | bidirectional | Port C bit 4 GPIO with LLWU wakeup input P8 and default function DISABLED; alternate functions include SPI0_PCS0, LPUART1_TX, TPM0_CH3 and I2S0_MCLK. |
| 26 | PTC5/LLWU_P9 | bidirectional | Port C bit 5 GPIO with LLWU wakeup input P9 and default function DISABLED; alternate functions include SPI0_SCK, LPTMR0_ALT2, I2S0_RXD0 and CMP0_OUT. |
| 27 | PTC6/LLWU_P10 | bidirectional | Port C bit 6 GPIO with LLWU wakeup input P10; default function is CMP0_IN0 (comparator input), and alternate functions include SPI0_MOSI, EXTRG_IN, I2S0_RX_BCLK, SPI0_MISO and I2S0_MCLK. |
| 28 | PTC7 | bidirectional | Port C bit 7 GPIO whose default function is CMP0_IN1 (comparator input); alternate functions include SPI0_MISO, audioUSB_SOF_OUT, I2S0_RX_FS and SPI0_MOSI. |
| 29 | PTD4/LLWU_P14 | bidirectional | Port D bit 4 GPIO with LLWU wakeup input P14 and default function DISABLED; alternate functions include SPI1_PCS0, UART2_RX, TPM0_CH4 and FXI00_D4. |
| 30 | PTD5 | bidirectional | Port D bit 5 GPIO whose default function is ADC0_SE6b; alternate functions include SPI1_SCK, UART2_TX, TPM0_CH5 and FXIO0_D5. |
| 31 | PTD6/LLWU_P15 | bidirectional | Port D bit 6 GPIO with LLWU wakeup input P15; default function is ADC0_SE7b, and alternate functions include SPI1_MOSI, LPUART0_RX, SPI1_MISO and FXIO0_D6. |
| 32 | PTD7 | bidirectional | Port D bit 7 GPIO with default function DISABLED; alternate functions include SPI1_MISO, LPUART0_TX, SPI1_MOSI and FXIO0_D7. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | QFN-32-EP(5x5) |
| Category | Embedded Processors & Controllers |
| Pins | 33 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | TSTG | -55 | | 150 | °C | | 5 |
| Solder temperature, lead-free | TSDR | | | 260 | °C | | 5 |
| Electrostatic discharge voltage, human body model | VHBM | -2000 | | 2000 | V | Human body model | 5 |
| Electrostatic discharge voltage, charged-device model | VCDM | -500 | | 500 | V | Charged-device model | 5 |
| Latch-up current at ambient temperature of 105 °C | ILAT | -100 | | 100 | mA | Ambient temperature of 105 °C | 5 |
| Digital supply voltage | VDD | -0.3 | | 3.8 | V | | 6 |
| Digital supply current | IDD | | | 120 | mA | | 6 |
| IO pin input voltage (maximum printed as VDD + 0.3 V) | VIO | -0.3 | | | V | Maximum printed as VDD + 0.3 V | 6 |
| Instantaneous maximum current single pin limit (applies to all port pins) | ID | -25 | | 25 | mA | Single pin limit, all port pins | 6 |
| Supply voltage | VDD | 1.71 | | 3.6 | V | | 7 |
| Analog supply voltage | VDDA | 1.71 | | 3.6 | V | | 7 |
| VDD-to-VDDA differential voltage | VDD, VDDA | -0.1 | | 0.1 | V | | 7 |
| VSS-to-VSSA differential voltage | VSS, VSSA | -0.1 | | 0.1 | V | | 7 |
| Input high voltage | VIH | 0.7 | | | × VDD | 2.7 V ≤ VDD ≤ 3.6 V | 7 |
| Input high voltage | VIH | 0.75 | | | × VDD | 1.7 V ≤ VDD ≤ 2.7 V | 7 |
| Input low voltage | VIL | | | 0.35 | × VDD | 2.7 V ≤ VDD ≤ 3.6 V | 7 |
| Input low voltage | VIL | | | 0.3 | × VDD | 1.7 V ≤ VDD ≤ 2.7 V | 7 |
| Input hysteresis | VHYS | 0.06 | | | × VDD | | 7 |
| IO pin negative DC injection current, single pin | IICIO | -3 | | | mA | Single pin, VIN < VSS-0.3V | 7 |
| Contiguous pin DC injection current, regional limit, includes sum of negative injection currents of 16 contiguous pins | IICcont | -25 | | | mA | Negative current injection | 7 |
| VDD voltage required to retain RAM | VRAM | 1.2 | | | V | | 7 |
| Temperature range | | -40 | | 105 | °C | Packages other than WLCSP (includes 32 QFN) | 2 |
| Falling VDD POR detect voltage | VPOR | 0.8 | 1.1 | 1.5 | V | | 7 |
| Falling low-voltage detect threshold, high range | VLVDH | 2.48 | 2.56 | 2.64 | V | LVDV = 01 | 7 |
| Oscillator crystal or resonator frequency, low-frequency mode | fosc_lo | 32 | | 40 | kHz | MCG_C2[RANGE]=00 | 29 |
| Oscillator crystal or resonator frequency, high-frequency mode (low range) | fosc_hi_1 | 3 | | 8 | MHz | MCG_C2[RANGE]=01 | 29 |
| Oscillator crystal or resonator frequency, high frequency mode (high range) | fosc_hi_2 | 8 | | 32 | MHz | MCG_C2[RANGE]=1x | 29 |
| Input clock frequency (external clock mode) | fec_extal | | | 48 | MHz | External clock mode | 29 |
| Input clock duty cycle (external clock mode) | tdc_extal | 40 | 50 | 60 | % | External clock mode | 29 |
| Longword Program high-voltage time | thvpgm4 | | 7.5 | 18 | μs | | 30 |
| Sector Erase high-voltage time | thversscr | | 13 | 113 | ms | | 30 |
| Erase Block high-voltage time for 128 KB | thversblk128k | | 52 | 452 | ms | | 30 |
| Read 1s Block execution time, 128 KB program flash | trd1blk128k | | | 1.7 | ms | | 30 |
| Program Longword execution time | tpgm4 | | 65 | 145 | μs | | 30 |
| Erase Flash Block execution time, 128 KB program flash | tersblk128k | | 88 | 600 | ms | | 30 |
| Erase All Blocks execution time | tersall | | 175 | 1300 | ms | | 30 |
| Average current adder during high voltage flash programming operation | IDD_PGM | | 2.5 | 6 | mA | | 31 |
| Average current adder during high voltage flash erase operation | IDD_ERS | | 1.5 | 4 | mA | | 31 |
| Supply voltage delta to VDD (VDD, VDDA) | ΔVDDA | -100 | 0 | 100 | mV | VDD, VDDA | 32 |
| Ground voltage delta to VSS (VSS, VSSA) | ΔVSSA | -100 | 0 | 100 | mV | VSS, VSSA | 32 |
| ADC reference voltage high | VREFH | 1.13 | | | V | | 32 |
| Input capacitance | CADIN | | 8 | 10 | pF | 16-bit mode | 32 |
| Input capacitance | CADIN | | 4 | 5 | pF | 8-bit / 10-bit / 12-bit modes | 32 |
| Supply current | IDDA_ADC | 0.215 | | 1.7 | mA | | 34 |
| Total unadjusted error, 12-bit modes | TUE | -6.8 | 4 | 6.8 | LSB | 12-bit modes; typ ±4 | 34 |
| Total unadjusted error, <12-bit modes | TUE | -2.1 | 1.4 | 2.1 | LSB | <12-bit modes; typ ±1.4 | 34 |
| Temp sensor slope | | 1.55 | 1.62 | 1.69 | mV/°C | Across the full temperature range of the device | 35 |
| Temp sensor voltage at 25 °C | VTEMP25 | 706 | 716 | 726 | mV | 25 °C | 35 |
| Voltage reference output with factory trim at nominal VDDA and temperature=25C | Vout | 1.1915 | 1.195 | 1.1977 | V | Nominal VDDA, temperature = 25 °C | 36 |
| Voltage reference output, factory trim | Vout | 1.1584 | | 1.2376 | V | Factory trim | 36 |
| Voltage reference output, user trim | Vout | 1.193 | | 1.197 | V | User trim | 36 |
| Reference voltage | VDACR | 1.13 | | 3.6 | V | Note 1: DAC reference can be VDDA or VREFH | 40 |
| Output load capacitance | CL | | | 100 | pF | | 40 |
| Output load current | IL | | | 1 | mA | | 40 |
| Supply current, low-power mode | IDDA_DACLP | | | 250 | μA | Low-power mode | 41 |
| Supply current, high-speed mode | IDDA_DACHP | | | 900 | μA | High-speed mode | 41 |
| Full-scale settling time (0x080 to 0xF7F), low-power mode | tDACLP | | 100 | 200 | μs | Settling within ±1 LSB | 41 |
| Full-scale settling time (0x080 to 0xF7F), high-power mode | tDACHP | | 15 | 30 | μs | Settling within ±1 LSB | 41 |
## CAD (KiCad official)
- Symbol: `MKL17Z256VFM4`
- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`
- 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files: `mkl17z256vfm4-etched.step` / `mkl17z256vfm4-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mkl17z256vfm4.step` / `mkl17z256vfm4.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [NXP Semicon datasheet](https://www.nxp.com/docs/en/data-sheet/KL17P64M48SF6.pdf) (73 pp, sha256 `1aa62c0ae73e57d3`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mkl17z256vfm4-datasheet.pdf)