main
Ray
Publish 0.1.0
359f788
MKL16Z32VLH4
NXP Semicon · Pre-ordered MCUs · LQFP-64(10x10)
MKL16Z32VLH4 from NXP Semicon, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTE0 | bidirectional | Port E bit 0 GPIO with default function DISABLED; alternate functions are SPI1_MISO, UART1_TX, RTC_CLKOUT, CMP0_OUT and I2C1_SDA, selected through the Port Control Module. |
| 2 | PTE1 | bidirectional | Port E bit 1 GPIO with default function DISABLED; alternate functions are SPI1_MOSI, UART1_RX, SPI1_MISO and I2C1_SCL. |
| 3 | VDD | power_in | Digital supply pin; the device operating voltage range is 1.71 to 3.6 V. |
| 4 | VSS | power_in | Digital ground pin. |
| 5 | PTE16 | bidirectional | Port E bit 16 GPIO with default analog function ADC0_DP1/ADC0_SE1; alternate functions are SPI0_PCS0, UART2_TX and TPM_CLKIN0. |
| 6 | PTE17 | bidirectional | Port E bit 17 GPIO with default analog function ADC0_DM1/ADC0_SE5a; alternate functions are SPI0_SCK, UART2_RX, TPM_CLKIN1 and LPTMR0_ALT3. |
| 7 | PTE18 | bidirectional | Port E bit 18 GPIO with default analog function ADC0_DP2/ADC0_SE2; alternate functions are SPI0_MOSI, I2C0_SDA and SPI0_MISO. |
| 8 | PTE19 | bidirectional | Port E bit 19 GPIO with default analog function ADC0_DM2/ADC0_SE6a; alternate functions are SPI0_MISO, I2C0_SCL and SPI0_MOSI. |
| 9 | PTE20 | bidirectional | Port E bit 20 GPIO with default analog function ADC0_DP0/ADC0_SE0; alternate functions are TPM1_CH0 and UART0_TX. |
| 10 | PTE21 | bidirectional | Port E bit 21 GPIO with default analog function ADC0_DM0/ADC0_SE4a; alternate functions are TPM1_CH1 and UART0_RX. |
| 11 | PTE22 | bidirectional | Port E bit 22 GPIO with default analog function ADC0_DP3/ADC0_SE3; alternate functions are TPM2_CH0 and UART2_TX. |
| 12 | PTE23 | bidirectional | Port E bit 23 GPIO with default analog function ADC0_DM3/ADC0_SE7a; alternate functions are TPM2_CH1 and UART2_RX. |
| 13 | VDDA | power_in | Analog supply pin for the analog modules listed in the signal table. |
| 14 | VREFH | power_in | High-side voltage reference pin for the analog modules listed in the signal table. |
| 15 | VREFL | power_in | Low-side voltage reference pin for the analog modules listed in the signal table. |
| 16 | VSSA | power_in | Analog ground pin. |
| 17 | PTE29 | bidirectional | Port E bit 29 GPIO with default analog function CMP0_IN5/ADC0_SE4b; alternate functions are TPM0_CH2 and TPM_CLKIN0. |
| 18 | PTE30 | bidirectional | Port E bit 30 GPIO with default analog function DAC0_OUT/ADC0_SE23/CMP0_IN4; alternate functions are TPM0_CH3 and TPM_CLKIN1. |
| 19 | PTE31 | bidirectional | Port E bit 31 GPIO with default function DISABLED; alternate function is TPM0_CH4. |
| 20 | PTE24 | bidirectional | Port E bit 24 GPIO with default function DISABLED; alternate functions are TPM0_CH0 and I2C0_SCL. |
| 21 | PTE25 | bidirectional | Port E bit 25 GPIO with default function DISABLED; alternate functions are TPM0_CH1 and I2C0_SDA. |
| 22 | PTA0 | bidirectional | Port A bit 0 GPIO with default function SWD_CLK (SWD debug clock); alternate functions are TSI0_CH1 and TPM0_CH5. |
| 23 | PTA1 | bidirectional | Port A bit 1 GPIO with default function DISABLED; alternate functions are TSI0_CH2, UART0_RX and TPM2_CH0. |
| 24 | PTA2 | bidirectional | Port A bit 2 GPIO with default function DISABLED; alternate functions are TSI0_CH3, UART0_TX and TPM2_CH1. |
| 25 | PTA3 | bidirectional | Port A bit 3 GPIO with default function SWD_DIO (SWD debug data); alternate functions are TSI0_CH4, I2C1_SCL and TPM0_CH0. |
| 26 | PTA4 | bidirectional | Port A bit 4 GPIO with default function NMI_b (non-maskable interrupt); alternate functions are TSI0_CH5, I2C1_SDA and TPM0_CH1. |
| 27 | PTA5 | bidirectional | Port A bit 5 GPIO with default function DISABLED; alternate functions are TPM0_CH2 and I2S0_TX_BCLK. |
| 28 | PTA12 | bidirectional | Port A bit 12 GPIO with default function DISABLED; alternate functions are TPM1_CH0 and I2S0_TXD0. |
| 29 | PTA13 | bidirectional | Port A bit 13 GPIO with default function DISABLED; alternate functions are TPM1_CH1 and I2S0_TX_FS. |
| 30 | VDD | power_in | Digital supply pin; the device operating voltage range is 1.71 to 3.6 V. |
| 31 | VSS | power_in | Digital ground pin. |
| 32 | PTA18 | input | Crystal oscillator input EXTAL0 for the 32 kHz to 40 kHz or 3 MHz to 32 MHz crystal oscillator; the pin can alternately be used as GPIO PTA18 with UART1_RX and TPM_CLKIN0. |
| 33 | PTA19 | output | Crystal oscillator output XTAL0 for the 32 kHz to 40 kHz or 3 MHz to 32 MHz crystal oscillator; the pin can alternately be used as GPIO PTA19 with UART1_TX, TPM_CLKIN1 and LPTMR0_ALT1. |
| 34 | PTA20 | input | RESET_b reset function on this pin by default; the pin can alternately be used as GPIO PTA20. |
| 35 | PTB0/LLWU_P5 | bidirectional | Port B bit 0 GPIO with default analog function ADC0_SE8/TSI0_CH0 and LLWU wakeup input LLWU_P5; alternate functions are I2C0_SCL and TPM1_CH0. |
| 36 | PTB1 | bidirectional | Port B bit 1 GPIO with default analog function ADC0_SE9/TSI0_CH6; alternate functions are I2C0_SDA and TPM1_CH1. |
| 37 | PTB2 | bidirectional | Port B bit 2 GPIO with default analog function ADC0_SE12/TSI0_CH7; alternate functions are I2C0_SCL and TPM2_CH0. |
| 38 | PTB3 | bidirectional | Port B bit 3 GPIO with default analog function ADC0_SE13/TSI0_CH8; alternate functions are I2C0_SDA and TPM2_CH1. |
| 39 | PTB16 | bidirectional | Port B bit 16 GPIO with default function TSI0_CH9; alternate functions are SPI1_MOSI, UART0_RX, TPM_CLKIN0 and SPI1_MISO. |
| 40 | PTB17 | bidirectional | Port B bit 17 GPIO with default function TSI0_CH10; alternate functions are SPI1_MISO, UART0_TX, TPM_CLKIN1 and SPI1_MOSI. |
| 41 | PTB18 | bidirectional | Port B bit 18 GPIO with default function TSI0_CH11; alternate functions are TPM2_CH0 and I2S0_TX_BCLK. |
| 42 | PTB19 | bidirectional | Port B bit 19 GPIO with default function TSI0_CH12; alternate functions are TPM2_CH1 and I2S0_TX_FS. |
| 43 | PTC0 | bidirectional | Port C bit 0 GPIO with default analog function ADC0_SE14/TSI0_CH13; alternate functions are EXTRG_IN, CMP0_OUT and I2S0_TXD0. |
| 44 | PTC1/LLWU_P6/RTC_CLKIN | bidirectional | Port C bit 1 GPIO with default analog function ADC0_SE15/TSI0_CH14 and RTC clock input RTC_CLKIN; alternate functions are I2C1_SCL, TPM0_CH0 and I2S0_TXD0. |
| 45 | PTC2 | bidirectional | Port C bit 2 GPIO with default analog function ADC0_SE11/TSI0_CH15; alternate functions are I2C1_SDA, TPM0_CH1 and I2S0_TX_FS. |
| 46 | PTC3/LLWU_P7 | bidirectional | Port C bit 3 GPIO with default function DISABLED and LLWU wakeup input LLWU_P7; alternate functions are UART1_RX, TPM0_CH2, CLKOUT and I2S0_TX_BCLK. |
| 47 | VSS | power_in | Digital ground pin. |
| 48 | VDD | power_in | Digital supply pin; the device operating voltage range is 1.71 to 3.6 V. |
| 49 | PTC4/LLWU_P8 | bidirectional | Port C bit 4 GPIO with default function DISABLED and LLWU wakeup input LLWU_P8; alternate functions are SPI0_PCS0, UART1_TX, TPM0_CH3 and I2S0_MCLK. |
| 50 | PTC5/LLWU_P9 | bidirectional | Port C bit 5 GPIO with default function DISABLED and LLWU wakeup input LLWU_P9; alternate functions are SPI0_SCK, LPTMR0_ALT2, I2S0_RXD0 and CMP0_OUT. |
| 51 | PTC6/LLWU_P10 | bidirectional | Port C bit 6 GPIO with default analog function CMP0_IN0 and LLWU wakeup input LLWU_P10; alternate functions are SPI0_MOSI, EXTRG_IN, I2S0_RX_BCLK, SPI0_MISO and I2S0_MCLK. |
| 52 | PTC7 | bidirectional | Port C bit 7 GPIO with default analog function CMP0_IN1; alternate functions are SPI0_MISO, I2S0_RX_FS and SPI0_MOSI. |
| 53 | PTC8 | bidirectional | Port C bit 8 GPIO with default analog function CMP0_IN2; alternate functions are I2C0_SCL, TPM0_CH4 and I2S0_MCLK. |
| 54 | PTC9 | bidirectional | Port C bit 9 GPIO with default analog function CMP0_IN3; alternate functions are I2C0_SDA, TPM0_CH5 and I2S0_RX_BCLK. |
| 55 | PTC10 | bidirectional | Port C bit 10 GPIO with default function DISABLED; alternate functions are I2C1_SCL and I2S0_RX_FS. |
| 56 | PTC11 | bidirectional | Port C bit 11 GPIO with default function DISABLED; alternate functions are I2C1_SDA and I2S0_RXD0. |
| 57 | PTD0 | bidirectional | Port D bit 0 GPIO with default function DISABLED; alternate functions are SPI0_PCS0 and TPM0_CH0. |
| 58 | PTD1 | bidirectional | Port D bit 1 GPIO with default analog function ADC0_SE5b; alternate functions are SPI0_SCK and TPM0_CH1. |
| 59 | PTD2 | bidirectional | Port D bit 2 GPIO with default function DISABLED; alternate functions are SPI0_MOSI, UART2_RX, TPM0_CH2 and SPI0_MISO. |
| 60 | PTD3 | bidirectional | Port D bit 3 GPIO with default function DISABLED; alternate functions are SPI0_MISO, UART2_TX, TPM0_CH3 and SPI0_MOSI. |
| 61 | PTD4/LLWU_P14 | bidirectional | Port D bit 4 GPIO with default function DISABLED and LLWU wakeup input LLWU_P14; alternate functions are SPI1_PCS0, UART2_RX and TPM0_CH4. |
| 62 | PTD5 | bidirectional | Port D bit 5 GPIO with default analog function ADC0_SE6b; alternate functions are SPI1_SCK, UART2_TX and TPM0_CH5. |
| 63 | PTD6/LLWU_P15 | bidirectional | Port D bit 6 GPIO with default analog function ADC0_SE7b and LLWU wakeup input LLWU_P15; alternate functions are SPI1_MOSI, UART0_RX and SPI1_MISO. |
| 64 | PTD7 | bidirectional | Port D bit 7 GPIO with default function DISABLED; alternate functions are SPI1_MISO, UART0_TX and SPI1_MOSI. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | TSTG | -55 | 150 | °C | 4 | ||
| Solder temperature, lead-free | TSDR | 260 | °C | 4 | |||
| Electrostatic discharge voltage, human body model | VHBM | -2000 | 2000 | V | 4 | ||
| Electrostatic discharge voltage, charged-device model | VCDM | -500 | 500 | V | 4 | ||
| Latch-up current | ILAT | -100 | 100 | mA | ambient temperature of 105 °C | 4 | |
| Digital supply voltage | VDD | -0.3 | 3.8 | V | 5 | ||
| Digital supply current | IDD | 120 | mA | 5 | |||
| Instantaneous maximum current single pin limit | ID | -25 | 25 | mA | applies to all port pins | 5 | |
| Supply voltage | VDD | 1.71 | 3.6 | V | 6 | ||
| Analog supply voltage | VDDA | 1.71 | 3.6 | V | 6 | ||
| VDD-to-VDDA differential voltage | VDD, VDDA | -0.1 | 0.1 | V | 6 | ||
| VSS-to-VSSA differential voltage | VSS, VSSA | -0.1 | 0.1 | V | 6 | ||
| IO pin negative DC injection current, single pin | IICIO | -3 | mA | VIN < VSS-0.3V | 6 | ||
| Contiguous pin DC injection current, regional limit (includes sum of negative injection currents of 16 contiguous pins) | IICcont | -25 | mA | negative current injection | 6 | ||
| VDD voltage required to retain RAM | VRAM | 1.2 | V | 6 | |||
| Falling VDD POR detect voltage | VPOR | 0.8 | 1.1 | 1.5 | V | 6 | |
| Falling low-voltage detect threshold, high range | VLVDH | 2.48 | 2.56 | 2.64 | V | LVDV = 01 | 6 |
| Total deviation of trimmed average DCO output frequency over voltage and temperature | Δfdco_t | -3 | 3 | %fdco | 21 | ||
| Total deviation of trimmed average DCO output frequency over fixed voltage and temperature range | Δfdco_t | -1.5 | 1.5 | %fdco | fixed voltage and temperature range of 0-70 °C | 21 | |
| Frequency deviation of internal reference clock (fast clock) over temperature and voltage | Δfintf_ft | -3 | 3 | %fintf_ft | factory trimmed at nominal VDD and 25 °C | 21 | |
| Internal reference frequency (fast clock), user trimmed | fintf_t | 3 | 5 | MHz | user trimmed at nominal VDD and 25 °C | 21 | |
| FLL reference frequency range | ffll_ref | 31.25 | 39.0625 | kHz | 21 | ||
| DCO output frequency range, low range | fdco | 20 | 20.97 | 25 | MHz | Low range (DRS = 00) | 21 |
| DCO output frequency range, mid range | fdco | 40 | 41.94 | 48 | MHz | Mid range (DRS = 01) | 21 |
| VCO operating frequency | fvco | 48 | 100 | MHz | 21 | ||
| PLL reference frequency range | fpll_ref | 2 | 4 | MHz | 21 | ||
| FLL target frequency acquisition time | tfll_acquire | 1 | ms | 21 | |||
| Supply current, low-power mode, 32 kHz | IDDOSC | 500 | nA | Low-power mode (HGO=0); VDD=3.3 V, 25 °C | 22 | ||
| Supply current, low-power mode, 4 MHz | IDDOSC | 200 | μA | Low-power mode (HGO=0); VDD=3.3 V, 25 °C | 22 | ||
| Supply current, low-power mode, 8 MHz (RANGE=01) | IDDOSC | 300 | μA | Low-power mode (HGO=0); VDD=3.3 V, 25 °C | 22 | ||
| Supply current, low-power mode, 16 MHz | IDDOSC | 950 | μA | Low-power mode (HGO=0); VDD=3.3 V, 25 °C | 22 | ||
| Supply current, low-power mode, 32 MHz | IDDOSC | 1.5 | mA | Low-power mode (HGO=0); VDD=3.3 V, 25 °C | 23 | ||
| Supply current, high gain mode, 32 kHz | IDDOSC | 25 | μA | High gain mode (HGO=1); VDD=3.3 V, 25 °C | 23 | ||
| Supply current, high gain mode, 4 MHz | IDDOSC | 400 | μA | High gain mode (HGO=1); VDD=3.3 V, 25 °C | 23 | ||
| Supply current, high gain mode, 8 MHz (RANGE=01) | IDDOSC | 500 | μA | High gain mode (HGO=1); VDD=3.3 V, 25 °C | 23 | ||
| Supply current, high gain mode, 16 MHz | IDDOSC | 2.5 | mA | High gain mode (HGO=1); VDD=3.3 V, 25 °C | 23 | ||
| Supply current, high gain mode, 24 MHz | IDDOSC | 3 | mA | High gain mode (HGO=1); VDD=3.3 V, 25 °C | 23 | ||
| Supply current, high gain mode, 32 MHz | IDDOSC | 4 | mA | High gain mode (HGO=1); VDD=3.3 V, 25 °C | 23 | ||
| Analog supply voltage (ADC, absolute) | ΔVDDA | -100 | 0 | 100 | mV | Delta to VDD (VDD, VDDA) | 26 |
| Ground voltage delta to VSS | ΔVSSA | -100 | 0 | 100 | mV | Delta to VSS (VSS, VSSA) | 26 |
| ADC supply current | IDDA_ADC | 0.215 | 1.7 | mA | 28 | ||
| Total unadjusted error, 12-bit modes | TUE | -6.8 | 6.8 | LSB | 12-bit modes | 29 | |
| Total unadjusted error, <12-bit modes | TUE | -2.1 | 2.1 | LSB | <12-bit modes | 29 | |
| Integral non-linearity, 12-bit modes | INL | -2.7 | 1.9 | LSB | 12-bit modes | 29 | |
| Integral non-linearity, <12-bit modes | INL | -0.7 | 0.5 | LSB | <12-bit modes | 29 | |
| Temperature sensor slope | Temp sensor slope | 1.55 | 1.62 | 1.69 | mV/°C | Across the full temperature range of the device | 30 |
| Temperature sensor voltage at 25 °C | VTEMP25 | 706 | 716 | 726 | mV | 25 °C | 30 |
| Analog source resistance (external) | RAS | 5 | kΩ | 13-bit / 12-bit modes, fADCK < 4 MHz | 27 | ||
| ADC conversion rate, ≤13-bit modes | Crate | 20 | 818.33 | Ksps | ≤ 13-bit modes; no ADC hardware averaging; continuous conversions enabled | 27 | |
| ADC conversion rate, 16-bit mode | Crate | 37 | 461.467 | Ksps | 16-bit mode; no ADC hardware averaging; continuous conversions enabled | 27 | |
| Comparator supply current, high-speed mode | IDDHS | 200 | μA | EN=1, PMODE=1 | 31 | ||
| Comparator supply current, low-speed mode | IDDLS | 20 | μA | EN=1, PMODE=0 | 31 | ||
| Propagation delay, high-speed mode | tDHS | 20 | 50 | 200 | ns | EN=1, PMODE=1 | 31 |
| Propagation delay, low-speed mode | tDLS | 80 | 250 | 600 | ns | EN=1, PMODE=0 | 31 |
| Output low | VCMPOl | 0.5 | V | 31 | |||
| Reference voltage | VDACR | 1.13 | 3.6 | V | 33 | ||
| Output load capacitance | CL | 100 | pF | 33 | |||
| Supply current, low-power mode (12-bit DAC) | IDDA_DACLP | 250 | μA | low-power mode | 34 | ||
| Supply current, high-speed mode (12-bit DAC) | IDDA_DACHP | 900 | μA | high-speed mode | 34 |
CAD (KiCad official)
- Symbol:
MKL16Z32VLH4 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
mkl16z32vlh4-etched.step/mkl16z32vlh4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mkl16z32vlh4.step/mkl16z32vlh4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (63 pp, sha256
929e9e1e00f9e223, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MKL16Z32VLH4
**NXP Semicon** · Pre-ordered MCUs · LQFP-64(10x10)
MKL16Z32VLH4 from NXP Semicon, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTE0 | bidirectional | Port E bit 0 GPIO with default function DISABLED; alternate functions are SPI1_MISO, UART1_TX, RTC_CLKOUT, CMP0_OUT and I2C1_SDA, selected through the Port Control Module. |
| 2 | PTE1 | bidirectional | Port E bit 1 GPIO with default function DISABLED; alternate functions are SPI1_MOSI, UART1_RX, SPI1_MISO and I2C1_SCL. |
| 3 | VDD | power_in | Digital supply pin; the device operating voltage range is 1.71 to 3.6 V. |
| 4 | VSS | power_in | Digital ground pin. |
| 5 | PTE16 | bidirectional | Port E bit 16 GPIO with default analog function ADC0_DP1/ADC0_SE1; alternate functions are SPI0_PCS0, UART2_TX and TPM_CLKIN0. |
| 6 | PTE17 | bidirectional | Port E bit 17 GPIO with default analog function ADC0_DM1/ADC0_SE5a; alternate functions are SPI0_SCK, UART2_RX, TPM_CLKIN1 and LPTMR0_ALT3. |
| 7 | PTE18 | bidirectional | Port E bit 18 GPIO with default analog function ADC0_DP2/ADC0_SE2; alternate functions are SPI0_MOSI, I2C0_SDA and SPI0_MISO. |
| 8 | PTE19 | bidirectional | Port E bit 19 GPIO with default analog function ADC0_DM2/ADC0_SE6a; alternate functions are SPI0_MISO, I2C0_SCL and SPI0_MOSI. |
| 9 | PTE20 | bidirectional | Port E bit 20 GPIO with default analog function ADC0_DP0/ADC0_SE0; alternate functions are TPM1_CH0 and UART0_TX. |
| 10 | PTE21 | bidirectional | Port E bit 21 GPIO with default analog function ADC0_DM0/ADC0_SE4a; alternate functions are TPM1_CH1 and UART0_RX. |
| 11 | PTE22 | bidirectional | Port E bit 22 GPIO with default analog function ADC0_DP3/ADC0_SE3; alternate functions are TPM2_CH0 and UART2_TX. |
| 12 | PTE23 | bidirectional | Port E bit 23 GPIO with default analog function ADC0_DM3/ADC0_SE7a; alternate functions are TPM2_CH1 and UART2_RX. |
| 13 | VDDA | power_in | Analog supply pin for the analog modules listed in the signal table. |
| 14 | VREFH | power_in | High-side voltage reference pin for the analog modules listed in the signal table. |
| 15 | VREFL | power_in | Low-side voltage reference pin for the analog modules listed in the signal table. |
| 16 | VSSA | power_in | Analog ground pin. |
| 17 | PTE29 | bidirectional | Port E bit 29 GPIO with default analog function CMP0_IN5/ADC0_SE4b; alternate functions are TPM0_CH2 and TPM_CLKIN0. |
| 18 | PTE30 | bidirectional | Port E bit 30 GPIO with default analog function DAC0_OUT/ADC0_SE23/CMP0_IN4; alternate functions are TPM0_CH3 and TPM_CLKIN1. |
| 19 | PTE31 | bidirectional | Port E bit 31 GPIO with default function DISABLED; alternate function is TPM0_CH4. |
| 20 | PTE24 | bidirectional | Port E bit 24 GPIO with default function DISABLED; alternate functions are TPM0_CH0 and I2C0_SCL. |
| 21 | PTE25 | bidirectional | Port E bit 25 GPIO with default function DISABLED; alternate functions are TPM0_CH1 and I2C0_SDA. |
| 22 | PTA0 | bidirectional | Port A bit 0 GPIO with default function SWD_CLK (SWD debug clock); alternate functions are TSI0_CH1 and TPM0_CH5. |
| 23 | PTA1 | bidirectional | Port A bit 1 GPIO with default function DISABLED; alternate functions are TSI0_CH2, UART0_RX and TPM2_CH0. |
| 24 | PTA2 | bidirectional | Port A bit 2 GPIO with default function DISABLED; alternate functions are TSI0_CH3, UART0_TX and TPM2_CH1. |
| 25 | PTA3 | bidirectional | Port A bit 3 GPIO with default function SWD_DIO (SWD debug data); alternate functions are TSI0_CH4, I2C1_SCL and TPM0_CH0. |
| 26 | PTA4 | bidirectional | Port A bit 4 GPIO with default function NMI_b (non-maskable interrupt); alternate functions are TSI0_CH5, I2C1_SDA and TPM0_CH1. |
| 27 | PTA5 | bidirectional | Port A bit 5 GPIO with default function DISABLED; alternate functions are TPM0_CH2 and I2S0_TX_BCLK. |
| 28 | PTA12 | bidirectional | Port A bit 12 GPIO with default function DISABLED; alternate functions are TPM1_CH0 and I2S0_TXD0. |
| 29 | PTA13 | bidirectional | Port A bit 13 GPIO with default function DISABLED; alternate functions are TPM1_CH1 and I2S0_TX_FS. |
| 30 | VDD | power_in | Digital supply pin; the device operating voltage range is 1.71 to 3.6 V. |
| 31 | VSS | power_in | Digital ground pin. |
| 32 | PTA18 | input | Crystal oscillator input EXTAL0 for the 32 kHz to 40 kHz or 3 MHz to 32 MHz crystal oscillator; the pin can alternately be used as GPIO PTA18 with UART1_RX and TPM_CLKIN0. |
| 33 | PTA19 | output | Crystal oscillator output XTAL0 for the 32 kHz to 40 kHz or 3 MHz to 32 MHz crystal oscillator; the pin can alternately be used as GPIO PTA19 with UART1_TX, TPM_CLKIN1 and LPTMR0_ALT1. |
| 34 | PTA20 | input | RESET_b reset function on this pin by default; the pin can alternately be used as GPIO PTA20. |
| 35 | PTB0/LLWU_P5 | bidirectional | Port B bit 0 GPIO with default analog function ADC0_SE8/TSI0_CH0 and LLWU wakeup input LLWU_P5; alternate functions are I2C0_SCL and TPM1_CH0. |
| 36 | PTB1 | bidirectional | Port B bit 1 GPIO with default analog function ADC0_SE9/TSI0_CH6; alternate functions are I2C0_SDA and TPM1_CH1. |
| 37 | PTB2 | bidirectional | Port B bit 2 GPIO with default analog function ADC0_SE12/TSI0_CH7; alternate functions are I2C0_SCL and TPM2_CH0. |
| 38 | PTB3 | bidirectional | Port B bit 3 GPIO with default analog function ADC0_SE13/TSI0_CH8; alternate functions are I2C0_SDA and TPM2_CH1. |
| 39 | PTB16 | bidirectional | Port B bit 16 GPIO with default function TSI0_CH9; alternate functions are SPI1_MOSI, UART0_RX, TPM_CLKIN0 and SPI1_MISO. |
| 40 | PTB17 | bidirectional | Port B bit 17 GPIO with default function TSI0_CH10; alternate functions are SPI1_MISO, UART0_TX, TPM_CLKIN1 and SPI1_MOSI. |
| 41 | PTB18 | bidirectional | Port B bit 18 GPIO with default function TSI0_CH11; alternate functions are TPM2_CH0 and I2S0_TX_BCLK. |
| 42 | PTB19 | bidirectional | Port B bit 19 GPIO with default function TSI0_CH12; alternate functions are TPM2_CH1 and I2S0_TX_FS. |
| 43 | PTC0 | bidirectional | Port C bit 0 GPIO with default analog function ADC0_SE14/TSI0_CH13; alternate functions are EXTRG_IN, CMP0_OUT and I2S0_TXD0. |
| 44 | PTC1/LLWU_P6/RTC_CLKIN | bidirectional | Port C bit 1 GPIO with default analog function ADC0_SE15/TSI0_CH14 and RTC clock input RTC_CLKIN; alternate functions are I2C1_SCL, TPM0_CH0 and I2S0_TXD0. |
| 45 | PTC2 | bidirectional | Port C bit 2 GPIO with default analog function ADC0_SE11/TSI0_CH15; alternate functions are I2C1_SDA, TPM0_CH1 and I2S0_TX_FS. |
| 46 | PTC3/LLWU_P7 | bidirectional | Port C bit 3 GPIO with default function DISABLED and LLWU wakeup input LLWU_P7; alternate functions are UART1_RX, TPM0_CH2, CLKOUT and I2S0_TX_BCLK. |
| 47 | VSS | power_in | Digital ground pin. |
| 48 | VDD | power_in | Digital supply pin; the device operating voltage range is 1.71 to 3.6 V. |
| 49 | PTC4/LLWU_P8 | bidirectional | Port C bit 4 GPIO with default function DISABLED and LLWU wakeup input LLWU_P8; alternate functions are SPI0_PCS0, UART1_TX, TPM0_CH3 and I2S0_MCLK. |
| 50 | PTC5/LLWU_P9 | bidirectional | Port C bit 5 GPIO with default function DISABLED and LLWU wakeup input LLWU_P9; alternate functions are SPI0_SCK, LPTMR0_ALT2, I2S0_RXD0 and CMP0_OUT. |
| 51 | PTC6/LLWU_P10 | bidirectional | Port C bit 6 GPIO with default analog function CMP0_IN0 and LLWU wakeup input LLWU_P10; alternate functions are SPI0_MOSI, EXTRG_IN, I2S0_RX_BCLK, SPI0_MISO and I2S0_MCLK. |
| 52 | PTC7 | bidirectional | Port C bit 7 GPIO with default analog function CMP0_IN1; alternate functions are SPI0_MISO, I2S0_RX_FS and SPI0_MOSI. |
| 53 | PTC8 | bidirectional | Port C bit 8 GPIO with default analog function CMP0_IN2; alternate functions are I2C0_SCL, TPM0_CH4 and I2S0_MCLK. |
| 54 | PTC9 | bidirectional | Port C bit 9 GPIO with default analog function CMP0_IN3; alternate functions are I2C0_SDA, TPM0_CH5 and I2S0_RX_BCLK. |
| 55 | PTC10 | bidirectional | Port C bit 10 GPIO with default function DISABLED; alternate functions are I2C1_SCL and I2S0_RX_FS. |
| 56 | PTC11 | bidirectional | Port C bit 11 GPIO with default function DISABLED; alternate functions are I2C1_SDA and I2S0_RXD0. |
| 57 | PTD0 | bidirectional | Port D bit 0 GPIO with default function DISABLED; alternate functions are SPI0_PCS0 and TPM0_CH0. |
| 58 | PTD1 | bidirectional | Port D bit 1 GPIO with default analog function ADC0_SE5b; alternate functions are SPI0_SCK and TPM0_CH1. |
| 59 | PTD2 | bidirectional | Port D bit 2 GPIO with default function DISABLED; alternate functions are SPI0_MOSI, UART2_RX, TPM0_CH2 and SPI0_MISO. |
| 60 | PTD3 | bidirectional | Port D bit 3 GPIO with default function DISABLED; alternate functions are SPI0_MISO, UART2_TX, TPM0_CH3 and SPI0_MOSI. |
| 61 | PTD4/LLWU_P14 | bidirectional | Port D bit 4 GPIO with default function DISABLED and LLWU wakeup input LLWU_P14; alternate functions are SPI1_PCS0, UART2_RX and TPM0_CH4. |
| 62 | PTD5 | bidirectional | Port D bit 5 GPIO with default analog function ADC0_SE6b; alternate functions are SPI1_SCK, UART2_TX and TPM0_CH5. |
| 63 | PTD6/LLWU_P15 | bidirectional | Port D bit 6 GPIO with default analog function ADC0_SE7b and LLWU wakeup input LLWU_P15; alternate functions are SPI1_MOSI, UART0_RX and SPI1_MISO. |
| 64 | PTD7 | bidirectional | Port D bit 7 GPIO with default function DISABLED; alternate functions are SPI1_MISO, UART0_TX and SPI1_MOSI. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | TSTG | -55 | | 150 | °C | | 4 |
| Solder temperature, lead-free | TSDR | | | 260 | °C | | 4 |
| Electrostatic discharge voltage, human body model | VHBM | -2000 | | 2000 | V | | 4 |
| Electrostatic discharge voltage, charged-device model | VCDM | -500 | | 500 | V | | 4 |
| Latch-up current | ILAT | -100 | | 100 | mA | ambient temperature of 105 °C | 4 |
| Digital supply voltage | VDD | -0.3 | | 3.8 | V | | 5 |
| Digital supply current | IDD | | | 120 | mA | | 5 |
| Instantaneous maximum current single pin limit | ID | -25 | | 25 | mA | applies to all port pins | 5 |
| Supply voltage | VDD | 1.71 | | 3.6 | V | | 6 |
| Analog supply voltage | VDDA | 1.71 | | 3.6 | V | | 6 |
| VDD-to-VDDA differential voltage | VDD, VDDA | -0.1 | | 0.1 | V | | 6 |
| VSS-to-VSSA differential voltage | VSS, VSSA | -0.1 | | 0.1 | V | | 6 |
| IO pin negative DC injection current, single pin | IICIO | -3 | | | mA | VIN < VSS-0.3V | 6 |
| Contiguous pin DC injection current, regional limit (includes sum of negative injection currents of 16 contiguous pins) | IICcont | -25 | | | mA | negative current injection | 6 |
| VDD voltage required to retain RAM | VRAM | 1.2 | | | V | | 6 |
| Falling VDD POR detect voltage | VPOR | 0.8 | 1.1 | 1.5 | V | | 6 |
| Falling low-voltage detect threshold, high range | VLVDH | 2.48 | 2.56 | 2.64 | V | LVDV = 01 | 6 |
| Total deviation of trimmed average DCO output frequency over voltage and temperature | Δfdco_t | -3 | | 3 | %fdco | | 21 |
| Total deviation of trimmed average DCO output frequency over fixed voltage and temperature range | Δfdco_t | -1.5 | | 1.5 | %fdco | fixed voltage and temperature range of 0-70 °C | 21 |
| Frequency deviation of internal reference clock (fast clock) over temperature and voltage | Δfintf_ft | -3 | | 3 | %fintf_ft | factory trimmed at nominal VDD and 25 °C | 21 |
| Internal reference frequency (fast clock), user trimmed | fintf_t | 3 | | 5 | MHz | user trimmed at nominal VDD and 25 °C | 21 |
| FLL reference frequency range | ffll_ref | 31.25 | | 39.0625 | kHz | | 21 |
| DCO output frequency range, low range | fdco | 20 | 20.97 | 25 | MHz | Low range (DRS = 00) | 21 |
| DCO output frequency range, mid range | fdco | 40 | 41.94 | 48 | MHz | Mid range (DRS = 01) | 21 |
| VCO operating frequency | fvco | 48 | | 100 | MHz | | 21 |
| PLL reference frequency range | fpll_ref | 2 | | 4 | MHz | | 21 |
| FLL target frequency acquisition time | tfll_acquire | | | 1 | ms | | 21 |
| Supply current, low-power mode, 32 kHz | IDDOSC | | | 500 | nA | Low-power mode (HGO=0); VDD=3.3 V, 25 °C | 22 |
| Supply current, low-power mode, 4 MHz | IDDOSC | | | 200 | μA | Low-power mode (HGO=0); VDD=3.3 V, 25 °C | 22 |
| Supply current, low-power mode, 8 MHz (RANGE=01) | IDDOSC | | | 300 | μA | Low-power mode (HGO=0); VDD=3.3 V, 25 °C | 22 |
| Supply current, low-power mode, 16 MHz | IDDOSC | | | 950 | μA | Low-power mode (HGO=0); VDD=3.3 V, 25 °C | 22 |
| Supply current, low-power mode, 32 MHz | IDDOSC | | | 1.5 | mA | Low-power mode (HGO=0); VDD=3.3 V, 25 °C | 23 |
| Supply current, high gain mode, 32 kHz | IDDOSC | | | 25 | μA | High gain mode (HGO=1); VDD=3.3 V, 25 °C | 23 |
| Supply current, high gain mode, 4 MHz | IDDOSC | | | 400 | μA | High gain mode (HGO=1); VDD=3.3 V, 25 °C | 23 |
| Supply current, high gain mode, 8 MHz (RANGE=01) | IDDOSC | | | 500 | μA | High gain mode (HGO=1); VDD=3.3 V, 25 °C | 23 |
| Supply current, high gain mode, 16 MHz | IDDOSC | | | 2.5 | mA | High gain mode (HGO=1); VDD=3.3 V, 25 °C | 23 |
| Supply current, high gain mode, 24 MHz | IDDOSC | | | 3 | mA | High gain mode (HGO=1); VDD=3.3 V, 25 °C | 23 |
| Supply current, high gain mode, 32 MHz | IDDOSC | | | 4 | mA | High gain mode (HGO=1); VDD=3.3 V, 25 °C | 23 |
| Analog supply voltage (ADC, absolute) | ΔVDDA | -100 | 0 | 100 | mV | Delta to VDD (VDD, VDDA) | 26 |
| Ground voltage delta to VSS | ΔVSSA | -100 | 0 | 100 | mV | Delta to VSS (VSS, VSSA) | 26 |
| ADC supply current | IDDA_ADC | 0.215 | | 1.7 | mA | | 28 |
| Total unadjusted error, 12-bit modes | TUE | -6.8 | | 6.8 | LSB | 12-bit modes | 29 |
| Total unadjusted error, <12-bit modes | TUE | -2.1 | | 2.1 | LSB | <12-bit modes | 29 |
| Integral non-linearity, 12-bit modes | INL | -2.7 | | 1.9 | LSB | 12-bit modes | 29 |
| Integral non-linearity, <12-bit modes | INL | -0.7 | | 0.5 | LSB | <12-bit modes | 29 |
| Temperature sensor slope | Temp sensor slope | 1.55 | 1.62 | 1.69 | mV/°C | Across the full temperature range of the device | 30 |
| Temperature sensor voltage at 25 °C | VTEMP25 | 706 | 716 | 726 | mV | 25 °C | 30 |
| Analog source resistance (external) | RAS | | | 5 | kΩ | 13-bit / 12-bit modes, fADCK < 4 MHz | 27 |
| ADC conversion rate, ≤13-bit modes | Crate | 20 | | 818.33 | Ksps | ≤ 13-bit modes; no ADC hardware averaging; continuous conversions enabled | 27 |
| ADC conversion rate, 16-bit mode | Crate | 37 | | 461.467 | Ksps | 16-bit mode; no ADC hardware averaging; continuous conversions enabled | 27 |
| Comparator supply current, high-speed mode | IDDHS | | | 200 | μA | EN=1, PMODE=1 | 31 |
| Comparator supply current, low-speed mode | IDDLS | | | 20 | μA | EN=1, PMODE=0 | 31 |
| Propagation delay, high-speed mode | tDHS | 20 | 50 | 200 | ns | EN=1, PMODE=1 | 31 |
| Propagation delay, low-speed mode | tDLS | 80 | 250 | 600 | ns | EN=1, PMODE=0 | 31 |
| Output low | VCMPOl | | | 0.5 | V | | 31 |
| Reference voltage | VDACR | 1.13 | | 3.6 | V | | 33 |
| Output load capacitance | CL | | | 100 | pF | | 33 |
| Supply current, low-power mode (12-bit DAC) | IDDA_DACLP | | | 250 | μA | low-power mode | 34 |
| Supply current, high-speed mode (12-bit DAC) | IDDA_DACHP | | | 900 | μA | high-speed mode | 34 |
## CAD (KiCad official)
- Symbol: `MKL16Z32VLH4`
- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`
- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files: `mkl16z32vlh4-etched.step` / `mkl16z32vlh4-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mkl16z32vlh4.step` / `mkl16z32vlh4.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [NXP Semicon datasheet](https://www.nxp.com/docs/en/data-sheet/KL16P64M48SF5.pdf) (63 pp, sha256 `929e9e1e00f9e223`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mkl16z32vlh4-datasheet.pdf)