Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MKL03Z8VFG4R

NXP Semicon · Microcontrollers (MCU/MPU/SOC) · QFN-16-EP(3x3)

MKL03Z8VFG4R from NXP Semicon, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive supply input; device operates from 1.71 to 3.6 V.
2 VSS power_in Ground reference for the device.
3 PTA3 bidirectional GPIO PTA3 with ALT0 function EXTAL0 (oscillator input), ALT2 I2C0_SCL, ALT3 I2C0_SDA and ALT4 LPUART0_TX.
4 PTA4 bidirectional GPIO PTA4 with ALT0 function XTAL0 (oscillator output), ALT2 I2C0_SDA, ALT3 I2C0_SCL, ALT4 LPUART0_RX and ALT5 CLKOUT.
5 PTA5/RTC_CLK_IN bidirectional GPIO PTA5 (disabled by default) with RTC_CLK_IN, TPM0_CH1 and SPI0_SS_b alternate functions.
6 PTA6 bidirectional GPIO PTA6 (disabled by default) with TPM0_CH0 and SPI0_MISO alternate functions.
7 PTA7/IRQ_4 bidirectional GPIO PTA7 (disabled by default) with IRQ_4 interrupt and SPI0_MISO / SPI0_MOSI alternate functions.
8 PTB0/IRQ_5/LLWU_P4 bidirectional GPIO PTB0 with ADC0_SE9 analog default, IRQ_5, LLWU_P4 wakeup, EXTRG_IN, SPI0_SCK and I2C0_SCL alternate functions.
9 PTB1/IRQ_6 bidirectional GPIO PTB1 with ADC0_SE8/CMP0_IN3 analog default, IRQ_6, LPUART0_TX/LPUART0_RX and I2C0_SDA alternate functions.
10 PTB2/IRQ_7 bidirectional GPIO PTB2 with VREF_OUT/CMP0_IN5 analog default, IRQ_7 and LPUART0_RX/LPUART0_TX alternate functions.
11 PTB3/IRQ_10 bidirectional True open-drain GPIO PTB3 (disabled by default) needing an external pullup, with IRQ_10, I2C0_SCL and LPUART0_TX alternate functions.
12 PTB4/IRQ_11 bidirectional True open-drain GPIO PTB4 (disabled by default) needing an external pullup, with IRQ_11, I2C0_SDA and LPUART0_RX alternate functions.
13 PTB5/IRQ_12 bidirectional GPIO PTB5 with NMI_b default function, ADC0_SE1/CMP0_IN1 analog, IRQ_12 and TPM1_CH1 alternate functions.
14 PTA0/IRQ_0/LLWU_P7 bidirectional GPIO PTA0 with SWD_CLK default function, ADC0_SE15/CMP0_IN2 analog, IRQ_0, LLWU_P7 wakeup and TPM1_CH0 alternate functions.
15 PTA1/IRQ_1/LPTMR0_ALT1 bidirectional GPIO PTA1 with RESET_b default function, IRQ_1, LPTMR0_ALT1 and TPM_CLKIN0 alternate functions.
16 PTA2 bidirectional GPIO PTA2 with SWD_DIO default function and CMP0_OUT alternate function.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package QFN-16-EP(3x3)
Category Embedded Processors & Controllers
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD 1.71 3.6 V 7
Analog supply voltage VDDA 1.71 3.6 V 7
VDD-to-VDDA differential voltage VDD, VDDA -0.1 0.1 V 7
VSS-to-VSSA differential voltage VSS, VSSA -0.1 0.1 V 7
Input high voltage (min as multiple of VDD) VIH 0.7 V 2.7 V ≤ VDD ≤ 3.6 V; min is 0.7 × VDD (1.7 V ≤ VDD ≤ 2.7 V: 0.75 × VDD) 7
Input low voltage (max as multiple of VDD) VIL 0.35 V 2.7 V ≤ VDD ≤ 3.6 V; max is 0.35 × VDD (1.7 V ≤ VDD ≤ 2.7 V: 0.3 × VDD) 7
Input hysteresis (multiple of VDD) VHYS 0.06 V min is 0.06 × VDD 7
IO pin negative DC injection current, single pin IICIO -5 mA VIN < VSS-0.3V 7
Contiguous pin DC injection current IICcont -25 mA Negative current injection, 16 contiguous pins 7
VDD voltage required to retain RAM VRAM 1.2 V 7
Digital supply voltage VDD -0.3 3.8 V 6
Digital supply current IDD 120 mA 6
IO pin input voltage VIO -0.3 0.3 V Max is VDD + 0.3 V 6
Instantaneous maximum current single pin limit ID -25 25 mA applies to all port pins 6
Analog supply voltage (relative to VDD) VDDA -0.3 0.3 V VDD, 0.3 to VDD + 0.3 V (offset from VDD) 6
Storage temperature TSTG -55 150 °C 5
Solder temperature, lead-free TSDR 260 °C 5
Moisture sensitivity level (QFN) MSL 3 5
ESD voltage, human body model VHBM -2000 2000 V 5
ESD voltage, charged-device model VCDM -500 500 V 5
Latch-up current ILAT -100 100 mA ambient temperature of 105 °C 5
LIRC8M/2M supply voltage VDD 1.08 1.47 V 30
LIRC temperature range T -40 125 °C 30
LIRC supply current in 2 MHz mode IDD_2M 14 17 µA 30
LIRC supply current in 8 MHz mode IDD_8M 30 35 µA 30
LIRC 2M trimmed frequency range fIRC_T_2M -3 3 %fIRC VDD≥1.89 V 30
LIRC 8M trimmed frequency range fIRC_T_8M -3 3 %fIRC VDD≥1.89 V 30
LIRC 2M startup time Tsu_2M 12.5 µs 30
LIRC 8M startup time Tsu_8M 12.5 µs 30
HIRC48M total deviation at high voltage over temperature Δfirc48m_ol_hv 0.5 1 %firc48m VDD=1.89V-3.6V, typ ±0.5, max ±1.0 30
HIRC48M period jitter (RMS) Jcyc_irc48m 35 150 ps 30
HIRC48M startup time tirc48mst 2 3 µs 30
Oscillator supply voltage VDD 1.71 3.6 V 30
Oscillator supply current, low-power mode IDDOSC 500 nA 32 kHz; VDD=3.3 V, Temperature =25 °C 30
Oscillator peak-to-peak amplitude Vpp 0.6 V low-frequency, low-power mode 31
Oscillator crystal or resonator frequency fosc_lo 32 40 kHz low frequency mode 31
Input clock duty cycle (external clock mode) tdc_extal 40 50 60 % 31
Crystal startup time tcst 750 ms 32 kHz low-frequency, low-power mode 31
Longword Program high-voltage time thvpgm4 7.5 18 µs 31
Sector Erase high-voltage time thversscr 13 113 ms 31
Erase All high-voltage time thversall 52 452 ms 31
Program Longword execution time tpgm4 65 145 µs 32
Erase Flash Sector execution time tersscr 14 114 ms 32
Erase All Blocks execution time tersall 61 500 ms 32
Average current adder during flash programming IDD_PGM 2.5 6 mA 32
Average current adder during flash erase IDD_ERS 1.5 4 mA 32
Data retention after up to 10 K cycles tnvmretp10k 5 50 years 32
Data retention after up to 1 K cycles tnvmretp1k 20 100 years 32
ADC supply voltage VDDA 1.71 3.6 V Absolute 33
ADC supply conversion clock frequency fADCK 1 18 MHz ≤ 12-bit mode 33
ADC conversion rate Crate 20 818.33 Ksps ≤ 12-bit modes, no hardware averaging, continuous conversions enabled 33
ADC supply current IDDA_ADC 0.215 1.7 mA VREFH = VDDA 34
Total unadjusted error, 12-bit modes (VREFH = VDDA) TUE 6 LSB 12-bit modes 34
Temp sensor slope 1.55 1.62 1.69 mV/°C Across the full temperature range of the device 35
Temp sensor voltage VTEMP25 706 716 726 mV 25 °C 35
Comparator supply voltage VDD 1.71 3.6 V 37
Comparator supply current, high-speed mode IDDHS 200 μA EN=1, PMODE=1 37
Comparator supply current, low-speed mode IDDLS 20 μA EN=1, PMODE=0 37
Voltage reference output with factory trim Vout 1.1915 1.195 1.1977 V nominal VDDA and temperature=25C 40
Voltage reference output, factory trim (full range) Vout 1.1584 1.2376 V 40
Voltage reference output, user trim Vout 1.193 1.197 V 40

CAD (KiCad official)

  • Symbol: MKL03Z8VFG4R
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: mkl03z8vfg4r-etched.step / mkl03z8vfg4r-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mkl03z8vfg4r.step / mkl03z8vfg4r.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (59 pp, sha256 74d10beb78df4e44, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF