main
Ray
Publish 0.1.0
20a5d75
MKE04Z128VLH4R
NXP Semicon · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-64(10x10)
MKE04Z128VLH4R from NXP Semicon, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTD1 | bidirectional | Port D bit 1 GPIO with reset default function DISABLED; alternate functions KBI0_P25, FTM2_CH3 and SPI1_MOSI, and it is a high-current drive pin when operated as output. |
| 2 | PTD0 | bidirectional | Port D bit 0 GPIO with reset default function DISABLED; alternate functions KBI0_P24, FTM2_CH2 and SPI1_SCK, and it is a high-current drive pin when operated as output. |
| 3 | PTH7 | bidirectional | Port H bit 7 GPIO with reset default function DISABLED; alternate functions KBI1_P31 and PWT_IN1. |
| 4 | PTH6 | bidirectional | Port H bit 6 GPIO with reset default function DISABLED; alternate function KBI1_P30. |
| 5 | PTE7 | bidirectional | Port E bit 7 GPIO with reset default function DISABLED; alternate functions KBI1_P7, TCLK2 and FTM1_CH1. |
| 6 | PTH2 | bidirectional | Port H bit 2 GPIO with reset default function DISABLED; alternate functions KBI1_P26, BUSOUT and FTM1_CH0. |
| 7 | VDD | power_in | Power supply pin; the device operating voltage range is 2.7 to 5.5 V. |
| 8 | VDDA | power_in | Analog power supply pin; VREFH and VDDA are internally connected in 64-pin packages. |
| 9 | VREFL | power_in | Low reference voltage pin (VREFL) as printed in the pinout table. |
| 10 | VSS/VSSA | power_in | Ground pin; VSS and VSSA are internally connected. |
| 11 | PTB7 | bidirectional | Port B bit 7 with reset default function EXTAL (oscillator input); alternate functions KBI0_P15 and I2C0_SCL. |
| 12 | PTB6 | bidirectional | Port B bit 6 with reset default function XTAL (oscillator output); alternate functions KBI0_P14 and I2C0_SDA. |
| 13 | PTI4 | bidirectional | Port I bit 4 GPIO with reset default function DISABLED; alternate function IRQ. |
| 14 | PTH1 | bidirectional | Port H bit 1 GPIO with reset default function DISABLED; alternate functions KBI1_P25 and FTM2_CH1, and it is a high-current drive pin when operated as output. |
| 15 | PTH0 | bidirectional | Port H bit 0 GPIO with reset default function DISABLED; alternate functions KBI1_P24 and FTM2_CH0, and it is a high-current drive pin when operated as output. |
| 16 | PTE6 | bidirectional | Port E bit 6 GPIO with reset default function DISABLED; alternate function KBI1_P6. |
| 17 | PTE5 | bidirectional | Port E bit 5 GPIO with reset default function DISABLED; alternate function KBI1_P5. |
| 18 | PTB5 | bidirectional | Port B bit 5 GPIO with reset default function DISABLED; alternate functions KBI0_P13, FTM2_CH5, SPI0_PCS and ACMP1_OUT, and it is a high-current drive pin when operated as output. |
| 19 | PTB4 | bidirectional | Port B bit 4 with reset default function NMI_b; alternate functions KBI0_P12, FTM2_CH4, SPI0_MISO and ACMP1_IN2, and it is a high-current drive pin when operated as output. |
| 20 | PTC3 | bidirectional | Port C bit 3 with reset default function ADC0_SE11; alternate functions KBI0_P19 and FTM2_CH3. |
| 21 | PTC2 | bidirectional | Port C bit 2 with reset default function ADC0_SE10; alternate functions KBI0_P18 and FTM2_CH2. |
| 22 | PTD7 | bidirectional | Port D bit 7 GPIO with reset default function DISABLED; alternate functions KBI0_P31 and UART2_TX. |
| 23 | PTD6 | bidirectional | Port D bit 6 GPIO with reset default function DISABLED; alternate functions KBI0_P30 and UART2_RX. |
| 24 | PTD5 | bidirectional | Port D bit 5 GPIO with reset default function DISABLED; alternate functions KBI0_P29 and PWT_IN0. |
| 25 | PTC1 | bidirectional | Port C bit 1 with reset default function ADC0_SE9; alternate functions KBI0_P17 and FTM2_CH1. |
| 26 | PTC0 | bidirectional | Port C bit 0 with reset default function ADC0_SE8; alternate functions KBI0_P16 and FTM2_CH0. |
| 27 | PTF7 | bidirectional | Port F bit 7 with reset default function ADC0_SE15; alternate function KBI1_P15. |
| 28 | PTF6 | bidirectional | Port F bit 6 with reset default function ADC0_SE14; alternate function KBI1_P14. |
| 29 | PTF5 | bidirectional | Port F bit 5 with reset default function ADC0_SE13; alternate function KBI1_P13. |
| 30 | PTF4 | bidirectional | Port F bit 4 with reset default function ADC0_SE12; alternate function KBI1_P12. |
| 31 | PTB3 | bidirectional | Port B bit 3 with reset default function ADC0_SE7; alternate functions KBI0_P11, SPI0_MOSI and FTM0_CH1. |
| 32 | PTB2 | bidirectional | Port B bit 2 with reset default function ADC0_SE6; alternate functions KBI0_P10, SPI0_SCK and FTM0_CH0. |
| 33 | PTB1 | bidirectional | Port B bit 1 with reset default function ADC0_SE5; alternate functions KBI0_P9 and UART0_TX. |
| 34 | PTB0 | bidirectional | Port B bit 0 with reset default function ADC0_SE4; alternate functions KBI0_P8, UART0_RX and PWT_IN1. |
| 35 | PTF3 | bidirectional | Port F bit 3 GPIO with reset default function DISABLED; alternate functions KBI1_P11 and UART1_TX. |
| 36 | PTF2 | bidirectional | Port F bit 2 GPIO with reset default function DISABLED; alternate functions KBI1_P10 and UART1_RX. |
| 37 | PTA7 | bidirectional | Port A bit 7 with reset default function ADC0_SE3; alternate functions KBI0_P7, FTM2_FLT2 and ACMP1_IN1. |
| 38 | PTA6 | bidirectional | Port A bit 6 with reset default function ADC0_SE2; alternate functions KBI0_P6, FTM2_FLT1 and ACMP1_IN0. |
| 39 | PTE4 | bidirectional | Port E bit 4 GPIO with reset default function DISABLED; alternate function KBI1_P4. |
| 40 | VSS | power_in | Ground pin (VSS). |
| 41 | VDD | power_in | Power supply pin; the device operating voltage range is 2.7 to 5.5 V. |
| 42 | PTF1 | bidirectional | Port F bit 1 GPIO with reset default function DISABLED; alternate functions KBI1_P9 and FTM2_CH1. |
| 43 | PTF0 | bidirectional | Port F bit 0 GPIO with reset default function DISABLED; alternate functions KBI1_P8 and FTM2_CH0. |
| 44 | PTD4 | bidirectional | Port D bit 4 GPIO with reset default function DISABLED; alternate function KBI0_P28. |
| 45 | PTD3 | bidirectional | Port D bit 3 GPIO with reset default function DISABLED; alternate functions KBI0_P27 and SPI1_PCS. |
| 46 | PTD2 | bidirectional | Port D bit 2 GPIO with reset default function DISABLED; alternate functions KBI0_P26 and SPI1_MISO. |
| 47 | PTA3 | bidirectional | Port A bit 3 GPIO with reset default function DISABLED; alternate functions KBI0_P3, UART0_TX and I2C0_SCL, and it is a true open-drain pin when operated as output. |
| 48 | PTA2 | bidirectional | Port A bit 2 GPIO with reset default function DISABLED; alternate functions KBI0_P2, UART0_RX and I2C0_SDA, and it is a true open-drain pin when operated as output. |
| 49 | PTA1 | bidirectional | Port A bit 1 with reset default function ADC0_SE1; alternate functions KBI0_P1, FTM0_CH1, I2C0_4WSDAOUT and ACMP0_IN1. |
| 50 | PTA0 | bidirectional | Port A bit 0 with reset default function ADC0_SE0; alternate functions KBI0_P0, FTM0_CH0, I2C0_4WSCLOUT and ACMP0_IN0. |
| 51 | PTC7 | bidirectional | Port C bit 7 GPIO with reset default function DISABLED; alternate functions KBI0_P23 and UART1_TX. |
| 52 | PTC6 | bidirectional | Port C bit 6 GPIO with reset default function DISABLED; alternate functions KBI0_P22 and UART1_RX. |
| 53 | PTE3 | bidirectional | Port E bit 3 GPIO with reset default function DISABLED; alternate functions KBI1_P3 and SPI0_PCS. |
| 54 | PTE2 | bidirectional | Port E bit 2 GPIO with reset default function DISABLED; alternate functions KBI1_P2, SPI0_MISO and PWT_IN0. |
| 55 | PTG3 | bidirectional | Port G bit 3 GPIO with reset default function DISABLED; alternate function KBI1_P19. |
| 56 | PTG2 | bidirectional | Port G bit 2 GPIO with reset default function DISABLED; alternate function KBI1_P18. |
| 57 | PTG1 | bidirectional | Port G bit 1 GPIO with reset default function DISABLED; alternate function KBI1_P17. |
| 58 | PTG0 | bidirectional | Port G bit 0 GPIO with reset default function DISABLED; alternate function KBI1_P16. |
| 59 | PTE1 | bidirectional | Port E bit 1 GPIO with reset default function DISABLED; alternate functions KBI1_P1, SPI0_MOSI and I2C1_SCL, and it is a high-current drive pin when operated as output. |
| 60 | PTE0 | bidirectional | Port E bit 0 GPIO with reset default function DISABLED; alternate functions KBI1_P0, SPI0_SCK, TCLK1 and I2C1_SDA, and it is a high-current drive pin when operated as output. |
| 61 | PTC5 | bidirectional | Port C bit 5 GPIO with reset default function DISABLED; alternate functions KBI0_P21, FTM1_CH1 and RTC_CLKOUT. |
| 62 | PTC4 | bidirectional | Port C bit 4 with reset default function SWD_CLK; alternate functions KBI0_P20, RTC_CLKOUT, FTM1_CH0 and ACMP0_IN2. |
| 63 | PTA5 | bidirectional | Port A bit 5 with reset default function RESET_b; alternate functions KBI0_P5, IRQ and TCLK0. |
| 64 | PTA4 | bidirectional | Port A bit 4 with reset default function SWD_DIO; alternate functions KBI0_P4 and ACMP0_OUT. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Digital supply voltage | VDD | -0.3 | 6 | V | 7 | ||
| Maximum current into VDD | IDD | 120 | mA | 7 | |||
| Input voltage of true open drain pins | VIN | -0.3 | 6 | V | 7 | ||
| Instantaneous maximum current single pin limit (all port pins) | ID | -25 | 25 | mA | 7 | ||
| Storage temperature | TSTG | -55 | 150 | °C | 6 | ||
| Solder temperature, lead-free | TSDR | 260 | °C | 6 | |||
| Electrostatic discharge voltage, human body model | VHBM | -6000 | 6000 | V | 6 | ||
| Electrostatic discharge voltage, charged-device model | VCDM | -500 | 500 | V | 6 | ||
| Latch-up current | ILAT | -100 | 100 | mA | ambient temperature of 125°C | 6 | |
| Operating voltage | 2.7 | 5.5 | V | 7 | |||
| Die junction temperature | TJ | -40 | 125 | °C | 18 | ||
| Ambient temperature | TA | -40 | 105 | °C | 18 | ||
| Thermal resistance, junction to ambient, natural convection (64 LQFP) | RθJA | 71 | °C/W | Single-layer (1S) | 19 | ||
| Thermal resistance, junction to ambient, natural convection (64 LQFP) | RθJA | 53 | °C/W | Four-layer (2s2p) | 19 | ||
| Thermal resistance, junction to board (64 LQFP) | RθJB | 35 | °C/W | 19 | |||
| Thermal resistance, junction to case (64 LQFP) | RθJC | 20 | °C/W | 19 | |||
| Output low voltage, all I/O pins, standard drive strength | VOL | 0.8 | V | 5 V, Iload = 5 mA | 8 | ||
| Output low voltage, high current drive pins, high-drive strength | VOL | 0.8 | V | 5 V, Iload = 20 mA | 8 | ||
| Max total IOH for all ports | IOHT | -100 | mA | 5 V | 8 | ||
| Max total IOH for all ports | IOHT | -60 | mA | 3 V | 8 | ||
| Max total IOL for all ports | IOLT | 100 | mA | 5 V | 8 | ||
| Max total IOL for all ports | IOLT | 60 | mA | 3 V | 8 | ||
| Input leakage current, per pin (pins in high impedance input mode) | /IIn/ | 0.1 | 1 | µA | VIN = VDD or VSS | 8 | |
| Total leakage combined for all port pins (pins in high impedance input mode) | /IINTOT/ | 2 | µA | VIN = VDD or VSS | 8 | ||
| Pullup resistors, all digital inputs when enabled (all I/O pins other than PTA2 and PTA3) | RPU | 30 | 50 | kΩ | 8 | ||
| Pullup resistors, PTA2 and PTA3 pins | RPU4 | 30 | 60 | kΩ | 8 | ||
| DC injection current, single pin limit | IIC | -2 | 2 | mA | VIN < VSS, VIN > VDD | 8 | |
| DC injection current, total MCU limit | IIC | -5 | 25 | mA | Includes sum of all stressed pins | 8 | |
| Input capacitance, all pins | CIn | 7 | pF | 8 | |||
| RAM retention voltage | VRAM | 2 | V | 8 | |||
| POR re-arm voltage | VPOR | 1.5 | 1.75 | 2 | V | 9 | |
| Falling low-voltage detect threshold, high range | VLVDH | 4.2 | 4.3 | 4.4 | V | LVDV = 1 | 9 |
| Falling low-voltage warning threshold, high range | VLVW1H | 4.3 | 4.4 | 4.5 | V | Level 1 falling (LVWV = 00) | 9 |
| Falling low-voltage warning threshold, high range | VLVW2H | 4.5 | 4.5 | 4.6 | V | Level 2 falling (LVWV = 01) | 9 |
| Falling low-voltage warning threshold, high range | VLVW3H | 4.6 | 4.6 | 4.7 | V | Level 3 falling (LVWV = 10) | 9 |
| Falling low-voltage warning threshold, high range | VLVW4H | 4.7 | 4.7 | 4.8 | V | Level 4 falling (LVWV = 11) | 9 |
| Falling low-voltage detect threshold, low range | VLVDL | 2.56 | 2.61 | 2.66 | V | LVDV = 0 | 9 |
| Falling low-voltage warning threshold, low range | VLVW1L | 2.62 | 2.7 | 2.78 | V | Level 1 falling (LVWV = 00) | 9 |
| Falling low-voltage warning threshold, low range | VLVW2L | 2.72 | 2.8 | 2.88 | V | Level 2 falling (LVWV = 01) | 9 |
| Falling low-voltage warning threshold, low range | VLVW3L | 2.82 | 2.9 | 2.98 | V | Level 3 falling (LVWV = 10) | 9 |
| Falling low-voltage warning threshold, low range | VLVW4L | 2.92 | 3 | 3.08 | V | Level 4 falling (LVWV = 11) | 9 |
| Buffered bandgap output | VBG | 1.14 | 1.16 | 1.18 | V | Factory trimmed at VDD = 5.0 V, Temp = 25 °C | 9 |
| Stop mode supply current, no clocks active (except 1 kHz LPO clock) | SIDD | 2 | 105 | µA | VDD = 5 V, -40 to 105 °C | 15 | |
| Stop mode supply current, no clocks active (except 1 kHz LPO clock) | SIDD | 1.9 | 95 | µA | VDD = 3 V, -40 to 105 °C | 15 | |
| Wait mode current, FEI mode, all modules clocks enabled | WIDD | 6.5 | 7.2 | mA | 24/24 MHz, VDD = 5 V, -40 to 105 °C | 15 | |
| Run supply current, FBE mode, all modules clocks enabled, run from RAM | RIDD | 9.8 | 14.9 | mA | 24/24 MHz, VDD = 5 V, -40 to 105 °C | 14 | |
| Crystal or resonator frequency, low range | flo | 31.25 | 32.768 | 39.0625 | kHz | RANGE = 0; -40 to 105 °C ambient | 21 |
| Crystal or resonator frequency, high range | fhi | 4 | 24 | MHz | RANGE = 1; -40 to 105 °C ambient | 21 | |
| DCO output frequency range | fdco | 40 | 50 | MHz | FLL reference = fint_t, flo, or fhi/RDIV | 22 | |
| Frequency accuracy of DCO output using factory trim value | Δfdco_ft | -1.5 | 1 | % | Over temperature range from -40 °C to 105 °C | 22 | |
| System and core clock | fSys | 48 | MHz | 16 | |||
| Bus frequency (tcyc = 1/fBus) | fBus | 24 | MHz | 16 | |||
| IRQ pulse width, asynchronous path | tILIH | 100 | ns | 16 | |||
| Supply voltage for program/erase | Vprog/erase | 2.7 | 5.5 | V | -40 °C to 105 °C | 23 | |
| Erase All Blocks | tERSALL | 95.42 | 100.18 | 100.3 | ms | 24 | |
| ADC conversion clock frequency, high speed | fADCK | 0.4 | 8 | MHz | ADLPC = 0 | 25 | |
| Total unadjusted error, 12-bit mode | ETUE | -5 | 5 | LSB | 12-bit mode; VREFH = VDDA, VREFL = VSSA | 26 | |
| Supply voltage, absolute (ADC) | VDDA | 2.7 | 5.5 | V | 25 |
CAD (KiCad official)
- Symbol:
MKE04Z128VLH4R - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
mke04z128vlh4r-etched.step/mke04z128vlh4r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mke04z128vlh4r.step/mke04z128vlh4r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (38 pp, sha256
74f089cfc3a0a25c, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MKE04Z128VLH4R
**NXP Semicon** · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-64(10x10)
MKE04Z128VLH4R from NXP Semicon, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTD1 | bidirectional | Port D bit 1 GPIO with reset default function DISABLED; alternate functions KBI0_P25, FTM2_CH3 and SPI1_MOSI, and it is a high-current drive pin when operated as output. |
| 2 | PTD0 | bidirectional | Port D bit 0 GPIO with reset default function DISABLED; alternate functions KBI0_P24, FTM2_CH2 and SPI1_SCK, and it is a high-current drive pin when operated as output. |
| 3 | PTH7 | bidirectional | Port H bit 7 GPIO with reset default function DISABLED; alternate functions KBI1_P31 and PWT_IN1. |
| 4 | PTH6 | bidirectional | Port H bit 6 GPIO with reset default function DISABLED; alternate function KBI1_P30. |
| 5 | PTE7 | bidirectional | Port E bit 7 GPIO with reset default function DISABLED; alternate functions KBI1_P7, TCLK2 and FTM1_CH1. |
| 6 | PTH2 | bidirectional | Port H bit 2 GPIO with reset default function DISABLED; alternate functions KBI1_P26, BUSOUT and FTM1_CH0. |
| 7 | VDD | power_in | Power supply pin; the device operating voltage range is 2.7 to 5.5 V. |
| 8 | VDDA | power_in | Analog power supply pin; VREFH and VDDA are internally connected in 64-pin packages. |
| 9 | VREFL | power_in | Low reference voltage pin (VREFL) as printed in the pinout table. |
| 10 | VSS/VSSA | power_in | Ground pin; VSS and VSSA are internally connected. |
| 11 | PTB7 | bidirectional | Port B bit 7 with reset default function EXTAL (oscillator input); alternate functions KBI0_P15 and I2C0_SCL. |
| 12 | PTB6 | bidirectional | Port B bit 6 with reset default function XTAL (oscillator output); alternate functions KBI0_P14 and I2C0_SDA. |
| 13 | PTI4 | bidirectional | Port I bit 4 GPIO with reset default function DISABLED; alternate function IRQ. |
| 14 | PTH1 | bidirectional | Port H bit 1 GPIO with reset default function DISABLED; alternate functions KBI1_P25 and FTM2_CH1, and it is a high-current drive pin when operated as output. |
| 15 | PTH0 | bidirectional | Port H bit 0 GPIO with reset default function DISABLED; alternate functions KBI1_P24 and FTM2_CH0, and it is a high-current drive pin when operated as output. |
| 16 | PTE6 | bidirectional | Port E bit 6 GPIO with reset default function DISABLED; alternate function KBI1_P6. |
| 17 | PTE5 | bidirectional | Port E bit 5 GPIO with reset default function DISABLED; alternate function KBI1_P5. |
| 18 | PTB5 | bidirectional | Port B bit 5 GPIO with reset default function DISABLED; alternate functions KBI0_P13, FTM2_CH5, SPI0_PCS and ACMP1_OUT, and it is a high-current drive pin when operated as output. |
| 19 | PTB4 | bidirectional | Port B bit 4 with reset default function NMI_b; alternate functions KBI0_P12, FTM2_CH4, SPI0_MISO and ACMP1_IN2, and it is a high-current drive pin when operated as output. |
| 20 | PTC3 | bidirectional | Port C bit 3 with reset default function ADC0_SE11; alternate functions KBI0_P19 and FTM2_CH3. |
| 21 | PTC2 | bidirectional | Port C bit 2 with reset default function ADC0_SE10; alternate functions KBI0_P18 and FTM2_CH2. |
| 22 | PTD7 | bidirectional | Port D bit 7 GPIO with reset default function DISABLED; alternate functions KBI0_P31 and UART2_TX. |
| 23 | PTD6 | bidirectional | Port D bit 6 GPIO with reset default function DISABLED; alternate functions KBI0_P30 and UART2_RX. |
| 24 | PTD5 | bidirectional | Port D bit 5 GPIO with reset default function DISABLED; alternate functions KBI0_P29 and PWT_IN0. |
| 25 | PTC1 | bidirectional | Port C bit 1 with reset default function ADC0_SE9; alternate functions KBI0_P17 and FTM2_CH1. |
| 26 | PTC0 | bidirectional | Port C bit 0 with reset default function ADC0_SE8; alternate functions KBI0_P16 and FTM2_CH0. |
| 27 | PTF7 | bidirectional | Port F bit 7 with reset default function ADC0_SE15; alternate function KBI1_P15. |
| 28 | PTF6 | bidirectional | Port F bit 6 with reset default function ADC0_SE14; alternate function KBI1_P14. |
| 29 | PTF5 | bidirectional | Port F bit 5 with reset default function ADC0_SE13; alternate function KBI1_P13. |
| 30 | PTF4 | bidirectional | Port F bit 4 with reset default function ADC0_SE12; alternate function KBI1_P12. |
| 31 | PTB3 | bidirectional | Port B bit 3 with reset default function ADC0_SE7; alternate functions KBI0_P11, SPI0_MOSI and FTM0_CH1. |
| 32 | PTB2 | bidirectional | Port B bit 2 with reset default function ADC0_SE6; alternate functions KBI0_P10, SPI0_SCK and FTM0_CH0. |
| 33 | PTB1 | bidirectional | Port B bit 1 with reset default function ADC0_SE5; alternate functions KBI0_P9 and UART0_TX. |
| 34 | PTB0 | bidirectional | Port B bit 0 with reset default function ADC0_SE4; alternate functions KBI0_P8, UART0_RX and PWT_IN1. |
| 35 | PTF3 | bidirectional | Port F bit 3 GPIO with reset default function DISABLED; alternate functions KBI1_P11 and UART1_TX. |
| 36 | PTF2 | bidirectional | Port F bit 2 GPIO with reset default function DISABLED; alternate functions KBI1_P10 and UART1_RX. |
| 37 | PTA7 | bidirectional | Port A bit 7 with reset default function ADC0_SE3; alternate functions KBI0_P7, FTM2_FLT2 and ACMP1_IN1. |
| 38 | PTA6 | bidirectional | Port A bit 6 with reset default function ADC0_SE2; alternate functions KBI0_P6, FTM2_FLT1 and ACMP1_IN0. |
| 39 | PTE4 | bidirectional | Port E bit 4 GPIO with reset default function DISABLED; alternate function KBI1_P4. |
| 40 | VSS | power_in | Ground pin (VSS). |
| 41 | VDD | power_in | Power supply pin; the device operating voltage range is 2.7 to 5.5 V. |
| 42 | PTF1 | bidirectional | Port F bit 1 GPIO with reset default function DISABLED; alternate functions KBI1_P9 and FTM2_CH1. |
| 43 | PTF0 | bidirectional | Port F bit 0 GPIO with reset default function DISABLED; alternate functions KBI1_P8 and FTM2_CH0. |
| 44 | PTD4 | bidirectional | Port D bit 4 GPIO with reset default function DISABLED; alternate function KBI0_P28. |
| 45 | PTD3 | bidirectional | Port D bit 3 GPIO with reset default function DISABLED; alternate functions KBI0_P27 and SPI1_PCS. |
| 46 | PTD2 | bidirectional | Port D bit 2 GPIO with reset default function DISABLED; alternate functions KBI0_P26 and SPI1_MISO. |
| 47 | PTA3 | bidirectional | Port A bit 3 GPIO with reset default function DISABLED; alternate functions KBI0_P3, UART0_TX and I2C0_SCL, and it is a true open-drain pin when operated as output. |
| 48 | PTA2 | bidirectional | Port A bit 2 GPIO with reset default function DISABLED; alternate functions KBI0_P2, UART0_RX and I2C0_SDA, and it is a true open-drain pin when operated as output. |
| 49 | PTA1 | bidirectional | Port A bit 1 with reset default function ADC0_SE1; alternate functions KBI0_P1, FTM0_CH1, I2C0_4WSDAOUT and ACMP0_IN1. |
| 50 | PTA0 | bidirectional | Port A bit 0 with reset default function ADC0_SE0; alternate functions KBI0_P0, FTM0_CH0, I2C0_4WSCLOUT and ACMP0_IN0. |
| 51 | PTC7 | bidirectional | Port C bit 7 GPIO with reset default function DISABLED; alternate functions KBI0_P23 and UART1_TX. |
| 52 | PTC6 | bidirectional | Port C bit 6 GPIO with reset default function DISABLED; alternate functions KBI0_P22 and UART1_RX. |
| 53 | PTE3 | bidirectional | Port E bit 3 GPIO with reset default function DISABLED; alternate functions KBI1_P3 and SPI0_PCS. |
| 54 | PTE2 | bidirectional | Port E bit 2 GPIO with reset default function DISABLED; alternate functions KBI1_P2, SPI0_MISO and PWT_IN0. |
| 55 | PTG3 | bidirectional | Port G bit 3 GPIO with reset default function DISABLED; alternate function KBI1_P19. |
| 56 | PTG2 | bidirectional | Port G bit 2 GPIO with reset default function DISABLED; alternate function KBI1_P18. |
| 57 | PTG1 | bidirectional | Port G bit 1 GPIO with reset default function DISABLED; alternate function KBI1_P17. |
| 58 | PTG0 | bidirectional | Port G bit 0 GPIO with reset default function DISABLED; alternate function KBI1_P16. |
| 59 | PTE1 | bidirectional | Port E bit 1 GPIO with reset default function DISABLED; alternate functions KBI1_P1, SPI0_MOSI and I2C1_SCL, and it is a high-current drive pin when operated as output. |
| 60 | PTE0 | bidirectional | Port E bit 0 GPIO with reset default function DISABLED; alternate functions KBI1_P0, SPI0_SCK, TCLK1 and I2C1_SDA, and it is a high-current drive pin when operated as output. |
| 61 | PTC5 | bidirectional | Port C bit 5 GPIO with reset default function DISABLED; alternate functions KBI0_P21, FTM1_CH1 and RTC_CLKOUT. |
| 62 | PTC4 | bidirectional | Port C bit 4 with reset default function SWD_CLK; alternate functions KBI0_P20, RTC_CLKOUT, FTM1_CH0 and ACMP0_IN2. |
| 63 | PTA5 | bidirectional | Port A bit 5 with reset default function RESET_b; alternate functions KBI0_P5, IRQ and TCLK0. |
| 64 | PTA4 | bidirectional | Port A bit 4 with reset default function SWD_DIO; alternate functions KBI0_P4 and ACMP0_OUT. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Digital supply voltage | VDD | -0.3 | | 6 | V | | 7 |
| Maximum current into VDD | IDD | | | 120 | mA | | 7 |
| Input voltage of true open drain pins | VIN | -0.3 | | 6 | V | | 7 |
| Instantaneous maximum current single pin limit (all port pins) | ID | -25 | | 25 | mA | | 7 |
| Storage temperature | TSTG | -55 | | 150 | °C | | 6 |
| Solder temperature, lead-free | TSDR | | | 260 | °C | | 6 |
| Electrostatic discharge voltage, human body model | VHBM | -6000 | | 6000 | V | | 6 |
| Electrostatic discharge voltage, charged-device model | VCDM | -500 | | 500 | V | | 6 |
| Latch-up current | ILAT | -100 | | 100 | mA | ambient temperature of 125°C | 6 |
| Operating voltage | | 2.7 | | 5.5 | V | | 7 |
| Die junction temperature | TJ | -40 | | 125 | °C | | 18 |
| Ambient temperature | TA | -40 | | 105 | °C | | 18 |
| Thermal resistance, junction to ambient, natural convection (64 LQFP) | RθJA | | 71 | | °C/W | Single-layer (1S) | 19 |
| Thermal resistance, junction to ambient, natural convection (64 LQFP) | RθJA | | 53 | | °C/W | Four-layer (2s2p) | 19 |
| Thermal resistance, junction to board (64 LQFP) | RθJB | | 35 | | °C/W | | 19 |
| Thermal resistance, junction to case (64 LQFP) | RθJC | | 20 | | °C/W | | 19 |
| Output low voltage, all I/O pins, standard drive strength | VOL | | | 0.8 | V | 5 V, Iload = 5 mA | 8 |
| Output low voltage, high current drive pins, high-drive strength | VOL | | | 0.8 | V | 5 V, Iload = 20 mA | 8 |
| Max total IOH for all ports | IOHT | | | -100 | mA | 5 V | 8 |
| Max total IOH for all ports | IOHT | | | -60 | mA | 3 V | 8 |
| Max total IOL for all ports | IOLT | | | 100 | mA | 5 V | 8 |
| Max total IOL for all ports | IOLT | | | 60 | mA | 3 V | 8 |
| Input leakage current, per pin (pins in high impedance input mode) | /IIn/ | | 0.1 | 1 | µA | VIN = VDD or VSS | 8 |
| Total leakage combined for all port pins (pins in high impedance input mode) | /IINTOT/ | | | 2 | µA | VIN = VDD or VSS | 8 |
| Pullup resistors, all digital inputs when enabled (all I/O pins other than PTA2 and PTA3) | RPU | 30 | | 50 | kΩ | | 8 |
| Pullup resistors, PTA2 and PTA3 pins | RPU4 | 30 | | 60 | kΩ | | 8 |
| DC injection current, single pin limit | IIC | -2 | | 2 | mA | VIN < VSS, VIN > VDD | 8 |
| DC injection current, total MCU limit | IIC | -5 | | 25 | mA | Includes sum of all stressed pins | 8 |
| Input capacitance, all pins | CIn | | | 7 | pF | | 8 |
| RAM retention voltage | VRAM | 2 | | | V | | 8 |
| POR re-arm voltage | VPOR | 1.5 | 1.75 | 2 | V | | 9 |
| Falling low-voltage detect threshold, high range | VLVDH | 4.2 | 4.3 | 4.4 | V | LVDV = 1 | 9 |
| Falling low-voltage warning threshold, high range | VLVW1H | 4.3 | 4.4 | 4.5 | V | Level 1 falling (LVWV = 00) | 9 |
| Falling low-voltage warning threshold, high range | VLVW2H | 4.5 | 4.5 | 4.6 | V | Level 2 falling (LVWV = 01) | 9 |
| Falling low-voltage warning threshold, high range | VLVW3H | 4.6 | 4.6 | 4.7 | V | Level 3 falling (LVWV = 10) | 9 |
| Falling low-voltage warning threshold, high range | VLVW4H | 4.7 | 4.7 | 4.8 | V | Level 4 falling (LVWV = 11) | 9 |
| Falling low-voltage detect threshold, low range | VLVDL | 2.56 | 2.61 | 2.66 | V | LVDV = 0 | 9 |
| Falling low-voltage warning threshold, low range | VLVW1L | 2.62 | 2.7 | 2.78 | V | Level 1 falling (LVWV = 00) | 9 |
| Falling low-voltage warning threshold, low range | VLVW2L | 2.72 | 2.8 | 2.88 | V | Level 2 falling (LVWV = 01) | 9 |
| Falling low-voltage warning threshold, low range | VLVW3L | 2.82 | 2.9 | 2.98 | V | Level 3 falling (LVWV = 10) | 9 |
| Falling low-voltage warning threshold, low range | VLVW4L | 2.92 | 3 | 3.08 | V | Level 4 falling (LVWV = 11) | 9 |
| Buffered bandgap output | VBG | 1.14 | 1.16 | 1.18 | V | Factory trimmed at VDD = 5.0 V, Temp = 25 °C | 9 |
| Stop mode supply current, no clocks active (except 1 kHz LPO clock) | SIDD | | 2 | 105 | µA | VDD = 5 V, -40 to 105 °C | 15 |
| Stop mode supply current, no clocks active (except 1 kHz LPO clock) | SIDD | | 1.9 | 95 | µA | VDD = 3 V, -40 to 105 °C | 15 |
| Wait mode current, FEI mode, all modules clocks enabled | WIDD | | 6.5 | 7.2 | mA | 24/24 MHz, VDD = 5 V, -40 to 105 °C | 15 |
| Run supply current, FBE mode, all modules clocks enabled, run from RAM | RIDD | | 9.8 | 14.9 | mA | 24/24 MHz, VDD = 5 V, -40 to 105 °C | 14 |
| Crystal or resonator frequency, low range | flo | 31.25 | 32.768 | 39.0625 | kHz | RANGE = 0; -40 to 105 °C ambient | 21 |
| Crystal or resonator frequency, high range | fhi | 4 | | 24 | MHz | RANGE = 1; -40 to 105 °C ambient | 21 |
| DCO output frequency range | fdco | 40 | | 50 | MHz | FLL reference = fint_t, flo, or fhi/RDIV | 22 |
| Frequency accuracy of DCO output using factory trim value | Δfdco_ft | -1.5 | | 1 | % | Over temperature range from -40 °C to 105 °C | 22 |
| System and core clock | fSys | | | 48 | MHz | | 16 |
| Bus frequency (tcyc = 1/fBus) | fBus | | | 24 | MHz | | 16 |
| IRQ pulse width, asynchronous path | tILIH | 100 | | | ns | | 16 |
| Supply voltage for program/erase | Vprog/erase | 2.7 | | 5.5 | V | -40 °C to 105 °C | 23 |
| Erase All Blocks | tERSALL | 95.42 | 100.18 | 100.3 | ms | | 24 |
| ADC conversion clock frequency, high speed | fADCK | 0.4 | | 8 | MHz | ADLPC = 0 | 25 |
| Total unadjusted error, 12-bit mode | ETUE | -5 | | 5 | LSB | 12-bit mode; VREFH = VDDA, VREFL = VSSA | 26 |
| Supply voltage, absolute (ADC) | VDDA | 2.7 | | 5.5 | V | | 25 |
## CAD (KiCad official)
- Symbol: `MKE04Z128VLH4R`
- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`
- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files: `mke04z128vlh4r-etched.step` / `mke04z128vlh4r-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mke04z128vlh4r.step` / `mke04z128vlh4r.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [NXP Semicon datasheet](https://www.nxp.com/docs/en/data-sheet/MKE04P80M48SF0.pdf) (38 pp, sha256 `74f089cfc3a0a25c`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mke04z128vlh4r-datasheet.pdf)