3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMKE04Z128VLD4
NXP Semicon · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-44(10x10)
MKE04Z128VLD4 from NXP Semicon, in a LQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTD1 | bidirectional | GPIO PTD1 with ALT functions KBI0_P25, FTM2_CH3 and SPI1_MOSI; supply range 2.7 to 5.5 V applies to the device. |
| 2 | PTD0 | bidirectional | GPIO PTD0 with ALT functions KBI0_P24, FTM2_CH2 and SPI1_SCK; supply range 2.7 to 5.5 V applies to the device. |
| 3 | PTE7 | bidirectional | GPIO PTE7 with ALT functions KBI1_P7, TCLK2 and FTM1_CH1; supply range 2.7 to 5.5 V applies to the device. |
| 4 | PTH2 | bidirectional | GPIO PTH2 with ALT functions KBI1_P26, BUSOUT and FTM1_CH0; supply range 2.7 to 5.5 V applies to the device. |
| 5 | VDD | power_in | Supply voltage pin, voltage range 2.7 to 5.5 V. |
| 6 | VDDA | power_in | Analog supply pin for the ADC and comparators, alternate function VREFH; voltage range 2.7 to 5.5 V. |
| 7 | VREFL | power_in | Low reference voltage for the ADC. |
| 8 | VSS/VSSA | power_in | Ground pin, internally connected to VSS and VSSA. |
| 9 | PTB7 | bidirectional | GPIO PTB7 that is also the EXTAL oscillator input, with ALT functions KBI0_P15 and I2C0_SCL. |
| 10 | PTB6 | bidirectional | GPIO PTB6 that is also the XTAL oscillator output, with ALT functions KBI0_P14 and I2C0_SDA. |
| 11 | PTI4 | bidirectional | GPIO PTI4 with ALT function IRQ (external interrupt). |
| 12 | PTB5 | bidirectional | High-current drive GPIO PTB5 with ALT functions KBI0_P13, FTM2_CH5, SPI0_PCS and ACMP1_OUT. |
| 13 | PTB4 | bidirectional | High-current drive GPIO PTB4 with default function NMI_b and ALT functions KBI0_P12, FTM2_CH4, SPI0_MISO and ACMP1_IN2. |
| 14 | PTC3 | bidirectional | GPIO PTC3 with ADC0 channel SE11 input, ALT functions KBI0_P19 and FTM2_CH3. |
| 15 | PTC2 | bidirectional | GPIO PTC2 with ADC0 channel SE10 input, ALT functions KBI0_P18 and FTM2_CH2. |
| 16 | PTD7 | bidirectional | GPIO PTD7 with ALT functions KBI0_P31 and UART2_TX. |
| 17 | PTD6 | bidirectional | GPIO PTD6 with ALT functions KBI0_P30 and UART2_RX. |
| 18 | PTD5 | bidirectional | GPIO PTD5 with ALT functions KBI0_P29 and PWT_IN0. |
| 19 | PTC1 | bidirectional | GPIO PTC1 with ADC0 channel SE9 input, ALT functions KBI0_P17 and FTM2_CH1. |
| 20 | PTC0 | bidirectional | GPIO PTC0 with ADC0 channel SE8 input, ALT functions KBI0_P16 and FTM2_CH0. |
| 21 | PTB3 | bidirectional | GPIO PTB3 with ADC0 channel SE7 input, ALT functions KBI0_P11, SPI0_MOSI and FTM0_CH1. |
| 22 | PTB2 | bidirectional | GPIO PTB2 with ADC0 channel SE6 input, ALT functions KBI0_P10, SPI0_SCK and FTM0_CH0. |
| 23 | PTB1 | bidirectional | GPIO PTB1 with ADC0 channel SE5 input, ALT functions KBI0_P9 and UART0_TX. |
| 24 | PTB0 | bidirectional | GPIO PTB0 with ADC0 channel SE4 input, ALT functions KBI0_P8, UART0_RX and PWT_IN1. |
| 25 | PTA7 | bidirectional | GPIO PTA7 with ADC0 channel SE3 input, ALT functions KBI0_P7, FTM2_FLT2 and ACMP1_IN1. |
| 26 | PTA6 | bidirectional | GPIO PTA6 with ADC0 channel SE2 input, ALT functions KBI0_P6, FTM2_FLT1 and ACMP1_IN0. |
| 27 | VSS | power_in | Ground pin. |
| 28 | VDD | power_in | Supply voltage pin, voltage range 2.7 to 5.5 V. |
| 29 | PTD4 | bidirectional | GPIO PTD4 with ALT function KBI0_P28. |
| 30 | PTD3 | bidirectional | GPIO PTD3 with ALT functions KBI0_P27 and SPI1_PCS. |
| 31 | PTD2 | bidirectional | GPIO PTD2 with ALT functions KBI0_P26 and SPI1_MISO. |
| 32 | PTA3 | bidirectional | True open-drain GPIO PTA3 when operated as output, with ALT functions KBI0_P3, UART0_TX and I2C0_SCL. |
| 33 | PTA2 | bidirectional | True open-drain GPIO PTA2 when operated as output, with ALT functions KBI0_P2, UART0_RX and I2C0_SDA. |
| 34 | PTA1 | bidirectional | GPIO PTA1 with ADC0 channel SE1 input, ALT functions KBI0_P1, FTM0_CH1, I2C0_4WSDAOUT and ACMP0_IN1. |
| 35 | PTA0 | bidirectional | GPIO PTA0 with ADC0 channel SE0 input, ALT functions KBI0_P0, FTM0_CH0, I2C0_4WSCLOUT and ACMP0_IN0. |
| 36 | PTC7 | bidirectional | GPIO PTC7 with ALT functions KBI0_P23 and UART1_TX. |
| 37 | PTC6 | bidirectional | GPIO PTC6 with ALT functions KBI0_P22 and UART1_RX. |
| 38 | PTE2 | bidirectional | GPIO PTE2 with ALT functions KBI1_P2, SPI0_MISO and PWT_IN0. |
| 39 | PTE1 | bidirectional | GPIO PTE1 with ALT functions KBI1_P1, SPI0_MOSI and I2C1_SCL. |
| 40 | PTE0 | bidirectional | GPIO PTE0 with ALT functions KBI1_P0, SPI0_SCK, TCLK1 and I2C1_SDA. |
| 41 | PTC5 | bidirectional | GPIO PTC5 with ALT functions KBI0_P21, FTM1_CH1 and RTC_CLKOUT. |
| 42 | PTC4 | bidirectional | GPIO PTC4 with default function SWD_CLK, ALT functions KBI0_P20, RTC_CLKOUT, FTM1_CH0 and ACMP0_IN2. |
| 43 | PTA5 | bidirectional | GPIO PTA5 with default function RESET_b, ALT functions KBI0_P5, IRQ and TCLK0. |
| 44 | PTA4 | bidirectional | GPIO PTA4 with default function SWD_DIO, ALT functions KBI0_P4 and ACMP0_OUT. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-44(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 44 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Digital supply voltage | VDD | -0.3 | 6 | V | 7 | ||
| Maximum current into VDD | IDD | 120 | mA | 7 | |||
| Input voltage of true open drain pins | -0.3 | 6 | V | 7 | |||
| Instantaneous maximum current single pin limit | ID | -25 | 25 | mA | applies to all port pins | 7 | |
| Storage temperature | TSTG | -55 | 150 | °C | 6 | ||
| Solder temperature, lead-free | TSDR | 260 | °C | 6 | |||
| Electrostatic discharge voltage, human body model | VHBM | -6000 | 6000 | V | 6 | ||
| Electrostatic discharge voltage, charged-device model | VCDM | -500 | 500 | V | 6 | ||
| Latch-up current at ambient temperature of 125°C | ILAT | -100 | 100 | mA | 6 | ||
| Operating voltage | 2.7 | 5.5 | V | 7 | |||
| Max total IOH for all ports | IOHT | -100 | mA | 5 V | 8 | ||
| Max total IOH for all ports | IOHT | -60 | mA | 3 V | 8 | ||
| Max total IOL for all ports | IOLT | 100 | mA | 5 V | 8 | ||
| Max total IOL for all ports | IOLT | 60 | mA | 3 V | 8 | ||
| Input leakage current, per pin | /IIn/ | 0.1 | 1 | µA | Per pin (pins in high impedance input mode), VIN = VDD or VSS | 8 | |
| Total leakage combined for all port pins | /IINTOT/ | 2 | µA | Pins in high impedance input mode, VIN = VDD or VSS | 8 | ||
| Pullup resistors | RPU | 30 | 50 | kΩ | All digital inputs, when enabled (all I/O pins other than PTA2 and PTA3) | 8 | |
| Pullup resistors | RPU4 | 30 | 60 | kΩ | PTA2 and PTA3 pins | 8 | |
| DC injection current, single pin limit | IIC | -2 | 2 | mA | Single pin limit VIN < VSS, VIN > VDD | 8 | |
| DC injection current, total MCU limit | IIC | -5 | 25 | mA | Total MCU limit, includes sum of all stressed pins | 8 | |
| Input capacitance, all pins | CIn | 7 | pF | 8 | |||
| RAM retention voltage | VRAM | 2 | V | 8 | |||
| POR re-arm voltage | VPOR | 1.5 | 1.75 | 2 | V | Maximum is highest voltage that POR is guaranteed | 9 |
| Falling low-voltage detect threshold, high range | VLVDH | 4.2 | 4.3 | 4.4 | V | LVDV = 1 | 9 |
| Falling low-voltage warning threshold, high range, level 1 | VLVW1H | 4.3 | 4.4 | 4.5 | V | Level 1 falling (LVWV = 00) | 9 |
| Falling low-voltage warning threshold, high range, level 2 | VLVW2H | 4.5 | 4.5 | 4.6 | V | Level 2 falling (LVWV = 01) | 9 |
| Falling low-voltage warning threshold, high range, level 3 | VLVW3H | 4.6 | 4.6 | 4.7 | V | Level 3 falling (LVWV = 10) | 9 |
| Falling low-voltage warning threshold, high range, level 4 | VLVW4H | 4.7 | 4.7 | 4.8 | V | Level 4 falling (LVWV = 11) | 9 |
| Falling low-voltage detect threshold, low range | VLVDL | 2.56 | 2.61 | 2.66 | V | LVDV = 0 | 9 |
| Stop mode supply current | SIDD | 2 | 105 | µA | 5 V, no clocks active (except 1 kHz LPO clock), -40 to 105 °C | 14 | |
| Stop mode supply current | SIDD | 1.9 | 95 | µA | 3 V, no clocks active (except 1 kHz LPO clock), -40 to 105 °C | 14 | |
| Comparator supply current (operation mode) | IDDA | 10 | 20 | µA | Operation mode | 27 | |
| Analog comparator analog input offset voltage | VAIO | 40 | mV | 27 | |||
| Absolute analog supply voltage | VDDA | 2.7 | 5.5 | V | Absolute | 25 | |
| Delta to VDD (VDD-VDDA) | ΔVDDA | -100 | 0 | 100 | mV | 25 | |
| ADC conversion clock frequency, high speed | fADCK | 0.4 | 8 | MHz | High speed (ADLPC=0) | 24 | |
| ADC conversion clock frequency, low power | fADCK | 0.4 | 4 | MHz | Low power (ADLPC=1) | 24 | |
| Total unadjusted error, 12-bit mode | ETUE | -5 | 5 | LSB | 12-bit mode, includes quantization | 26 | |
| System and core clock | fSys | 48 | MHz | 16 | |||
| Bus frequency | fBus | 24 | MHz | 16 | |||
| Internal low power oscillator frequency | fLPO | 0.67 | 1 | 1.25 | KHz | 16 | |
| SWD_CLK frequency of operation | J1 | 0 | 24 | MHz | Serial wire debug | 20 | |
| SWD_CLK clock pulse width | J3 | 20 | ns | Serial wire debug | 20 | ||
| SWD_CLK rise and fall times | J4 | 3 | ns | 20 | |||
| Die junction temperature | TJ | -40 | 125 | °C | 18 | ||
| Ambient temperature | TA | -40 | 105 | °C | 18 | ||
| Supply voltage for program/erase | Vprog/erase | 2.7 | 5.5 | V | -40 °C to 105 °C | 23 | |
| Buffered bandgap output | VBG | 1.14 | 1.16 | 1.18 | V | Factory trimmed at VDD = 5.0 V, Temp = 25 °C | 9 |
| Data retention at TJavg = 85°C after up to 10,000 program/erase cycles | tD_ret | 15 | 100 | years | 24 | ||
| Factory trimmed internal oscillator accuracy | Δfint_ft | -0.5 | 0.5 | % | T = 25 °C, VDD = 5 V | 22 | |
| DCO output frequency range | fdco | 40 | 50 | MHz | FLL reference = fint_t, flo, or fhi/RDIV | 22 | |
| Thermal resistance, junction to ambient (natural convection), single-layer (1S), 44 LQFP | RθJA | 75 | °C/W | Per JEDEC JESD51-2, single layer board | 19 | ||
| Thermal resistance, junction to ambient (natural convection), four-layer (2s2p), 44 LQFP | RθJA | 53 | °C/W | Per JEDEC JESD51-6, board horizontal | 19 | ||
| Thermal resistance, junction to ambient (200 ft./min. air speed), single-layer (1S), 44 LQFP | RθJMA | 62 | °C/W | 200 ft./min. air speed | 19 | ||
| Thermal resistance, junction to ambient (200 ft./min. air speed), four-layer (2s2p), 44 LQFP | RθJMA | 47 | °C/W | 200 ft./min. air speed | 19 | ||
| Thermal resistance, junction to board, 44 LQFP | RθJB | 34 | °C/W | 19 | |||
| Thermal resistance, junction to case, 44 LQFP | RθJC | 20 | °C/W | 19 | |||
| Thermal characterization parameter, junction to package top, 44 LQFP | ΨJT | 5 | °C/W | Natural convection | 19 |
CAD (KiCad official)
- Symbol:
MKE04Z128VLD4 - Footprint:
Package_QFP:LQFP-44_10x10mm_P0.8mm - 3D model: LQFP-44(10x10) (KiCad packages3D, STEP)
- 3D model files:
mke04z128vld4-etched.step/mke04z128vld4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mke04z128vld4.step/mke04z128vld4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (38 pp, sha256
74f089cfc3a0a25c, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).