main
History Download
Ray Publish 0.1.0 aa15f2a

MKE02Z64VQH2

NXP Semicon · Pre-ordered MCUs · QFP-64(14x14)

MKE02Z64VQH2 from NXP Semicon, in a QFP-64(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PTD1 bidirectional GPIO port D bit 1, high-current drive pin as output, with alternates KBI1_P1, FTM2_CH3, SPI1_MOSI.
2 PTD0 bidirectional GPIO port D bit 0, high-current drive pin as output, with alternates KBI1_P0, FTM2_CH2, SPI1_SCK.
3 PTH7 bidirectional GPIO port H bit 7 with no alternate functions listed.
4 PTH6 bidirectional GPIO port H bit 6 with no alternate functions listed.
5 PTE7 bidirectional GPIO port E bit 7 with alternates FTM2_CLK and FTM1_CH1.
6 PTH2 bidirectional GPIO port H bit 2 with alternates BUSOUT and FTM1_CH0.
7 VDD power_in Positive power supply input (device operating range 2.7 to 5.5 V).
8 VDDA/VREFH power_in Analog power supply and ADC high voltage reference, internally connected to each other.
9 VREFL power_in ADC low voltage reference.
10 VSSA/VSS power_in Analog ground, internally connected to VSS.
11 PTB7 bidirectional GPIO port B bit 7 with alternates I2C0_SCL and EXTAL (oscillator input).
12 PTB6 bidirectional GPIO port B bit 6 with alternates I2C0_SDA and XTAL (oscillator output).
13 VSS power_in Ground.
14 PTH1 bidirectional GPIO port H bit 1, high-current drive pin as output, with alternate FTM2_CH1.
15 PTH0 bidirectional GPIO port H bit 0, high-current drive pin as output, with alternate FTM2_CH0.
16 PTE6 bidirectional GPIO port E bit 6 with no alternate functions listed.
17 PTE5 bidirectional GPIO port E bit 5 with no alternate functions listed.
18 PTB5 bidirectional GPIO port B bit 5, high-current drive pin as output, with alternates FTM2_CH5, SPI0_PCS0, ACMP1_OUT.
19 PTB4 bidirectional GPIO port B bit 4, high-current drive pin as output, with alternates FTM2_CH4, SPI0_MISO, NMI, ACMP1_IN2.
20 PTC3 bidirectional GPIO port C bit 3 with alternates FTM2_CH3 and ADC0_SE11.
21 PTC2 bidirectional GPIO port C bit 2 with alternates FTM2_CH2 and ADC0_SE10.
22 PTD7 bidirectional GPIO port D bit 7 with alternates KBI1_P7 and UART2_TX.
23 PTD6 bidirectional GPIO port D bit 6 with alternates KBI1_P6 and UART2_RX.
24 PTD5 bidirectional GPIO port D bit 5 with alternate KBI1_P5.
25 PTC1 bidirectional GPIO port C bit 1 with alternates FTM2_CH1 and ADC0_SE9.
26 PTC0 bidirectional GPIO port C bit 0 with alternates FTM2_CH0 and ADC0_SE8.
27 PTF7 bidirectional GPIO port F bit 7 with alternate ADC0_SE15.
28 PTF6 bidirectional GPIO port F bit 6 with alternate ADC0_SE14.
29 PTF5 bidirectional GPIO port F bit 5 with alternate ADC0_SE13.
30 PTF4 bidirectional GPIO port F bit 4 with alternate ADC0_SE12.
31 PTB3 bidirectional GPIO port B bit 3 with alternates KBI0_P7, SPI0_MOSI, FTM0_CH1, ADC0_SE7.
32 PTB2 bidirectional GPIO port B bit 2 with alternates KBI0_P6, SPI0_SCK, FTM0_CH0, ADC0_SE6.
33 PTB1 bidirectional GPIO port B bit 1 with alternates KBI0_P5, UART0_TX, ADC0_SE5.
34 PTB0 bidirectional GPIO port B bit 0 with alternates KBI0_P4, UART0_RX, ADC0_SE4.
35 PTF3 bidirectional GPIO port F bit 3 with no alternate functions listed.
36 PTF2 bidirectional GPIO port F bit 2 with no alternate functions listed.
37 PTA7 bidirectional GPIO port A bit 7 with alternates FTM2_FLT2, ACMP1_IN1, ADC0_SE3.
38 PTA6 bidirectional GPIO port A bit 6 with alternates FTM2_FLT1, ACMP1_IN0, ADC0_SE2.
39 PTE4 bidirectional GPIO port E bit 4 with no alternate functions listed.
40 VSS power_in Ground.
41 VDD power_in Positive power supply input (device operating range 2.7 to 5.5 V).
42 PTF1 bidirectional GPIO port F bit 1 with no alternate functions listed.
43 PTF0 bidirectional GPIO port F bit 0 with no alternate functions listed.
44 PTD4 bidirectional GPIO port D bit 4 with alternate KBI1_P4.
45 PTD3 bidirectional GPIO port D bit 3 with alternates KBI1_P3 and SPI1_PCS0.
46 PTD2 bidirectional GPIO port D bit 2 with alternates KBI1_P2 and SPI1_MISO.
47 PTA3 bidirectional GPIO port A bit 3, true open-drain pin as output, with alternates KBI0_P3, UART0_TX, I2C0_SCL.
48 PTA2 bidirectional GPIO port A bit 2, true open-drain pin as output, with alternates KBI0_P2, UART0_RX, I2C0_SDA.
49 PTA1 bidirectional GPIO port A bit 1 with alternates KBI0_P1, FTM0_CH1, ACMP0_IN1, ADC0_SE1.
50 PTA0 bidirectional GPIO port A bit 0 with alternates KBI0_P0, FTM0_CH0, ACMP0_IN0, ADC0_SE0.
51 PTC7 bidirectional GPIO port C bit 7 with alternate UART1_TX.
52 PTC6 bidirectional GPIO port C bit 6 with alternate UART1_RX.
53 PTE3 bidirectional GPIO port E bit 3 with alternate SPI0_PCS0.
54 PTE2 bidirectional GPIO port E bit 2 with alternate SPI0_MISO.
55 PTG3 bidirectional GPIO port G bit 3 with no alternate functions listed.
56 PTG2 bidirectional GPIO port G bit 2 with no alternate functions listed.
57 PTG1 bidirectional GPIO port G bit 1 with no alternate functions listed.
58 PTG0 bidirectional GPIO port G bit 0 with no alternate functions listed.
59 PTE1 bidirectional GPIO port E bit 1, high-current drive pin as output, with alternate SPI0_MOSI.
60 PTE0 bidirectional GPIO port E bit 0, high-current drive pin as output, with alternates SPI0_SCK and FTM1_CLK.
61 PTC5 bidirectional GPIO port C bit 5 with alternates FTM1_CH1 and RTCO.
62 PTC4 bidirectional GPIO port C bit 4 with alternates RTCO, FTM1_CH0, ACMP0_IN2, SWD_CLK.
63 PTA5 bidirectional GPIO port A bit 5 with alternates IRQ, FTM0_CLK, and RESET.
64 PTA4 bidirectional GPIO port A bit 4 with alternates ACMP0_OUT and SWD_DIO.

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package QFP-64(14x14)
Category Embedded Processors & Controllers
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Digital supply voltage VDD -0.3 6 V 7
Maximum current into VDD IDD 120 mA 7
Input voltage except true open drain pins VIN -0.3 V Upper limit printed as VDD + 0.3 (formula, not numeric) 7
Input voltage of true open drain pins VIN -0.3 6 V 7
Instantaneous maximum current single pin limit (all port pins) ID -25 25 mA 7
Storage temperature TSTG -55 150 °C 6
Solder temperature, lead-free TSDR 260 °C 6
Electrostatic discharge voltage, human body model VHBM -6000 6000 V JEDEC JESD22-A114 6
Electrostatic discharge voltage, charged-device model VCDM -500 500 V JEDEC JESD22-C101 6
Latch-up current at ambient temperature of 125°C ILAT -100 100 mA JESD78D 6
Die junction temperature TJ -40 125 °C 18
Ambient temperature TA -40 105 °C 18
Operating voltage 2.7 5.5 V 7
Max total IOH for all ports IOHT -100 mA VDD 5 V 8
Max total IOH for all ports IOHT -60 mA VDD 3 V 8
Max total IOL for all ports IOLT 100 mA VDD 5 V 8
Max total IOL for all ports IOLT 60 mA VDD 3 V 8
Input leakage current per pin /IIn/ 0.1 1 µA Pin in high impedance input mode, VIN = VDD or VSS 8
Total leakage for all port pins /IINTOT/ 2 µA Pins in high impedance input mode, VIN = VDD or VSS 8
Pullup resistors, all digital inputs except PTA2 and PTA3 RPU 30 50 kΩ When enabled 8
Pullup resistors, PTA2 and PTA3 RPU4 30 60 kΩ 8
DC injection current, single pin limit IIC -2 2 mA VIN < VSS, VIN > VDD 8
DC injection current, total MCU limit IIC -5 25 mA Includes sum of all stressed pins 8
Input capacitance, all pins CIn 7 pF 8
RAM retention voltage VRAM 2 V 8
POR re-arm voltage VPOR 1.5 1.75 2 V 9
Falling low-voltage detect threshold, high range VLVDH 4.2 4.3 4.4 V LVDV = 1 9
Falling low-voltage warning threshold, high range, level 1 VLVW1H 4.3 4.4 4.5 V LVWV = 00 9
Falling low-voltage warning threshold, high range, level 2 VLVW2H 4.5 4.5 4.6 V LVWV = 01 9
Falling low-voltage warning threshold, high range, level 3 VLVW3H 4.6 4.6 4.7 V LVWV = 10 9
Falling low-voltage warning threshold, high range, level 4 VLVW4H 4.7 4.7 4.8 V LVWV = 11 9
Falling low-voltage detect threshold, low range VLVDL 2.56 2.61 2.66 V LVDV = 0 9
Falling low-voltage warning threshold, low range, level 1 VLVW1L 2.62 2.7 2.78 V LVWV = 00 9
Falling low-voltage warning threshold, low range, level 2 VLVW2L 2.72 2.8 2.88 V LVWV = 01 9
Falling low-voltage warning threshold, low range, level 3 VLVW3L 2.82 2.9 2.98 V LVWV = 10 9
Falling low-voltage warning threshold, low range, level 4 VLVW4L 2.92 3 3.08 V LVWV = 11 9
Buffered bandgap output VBG 1.14 1.16 1.18 V Factory trimmed at VDD = 5.0 V, 25 °C 9
Run supply current, FBE mode, all clocks enabled, run from RAM RIDD 9 14.8 mA 20/20 MHz, VDD 5 V, -40 to 105 °C 14
Run supply current, FBE mode, all clocks enabled, run from RAM RIDD 8.8 11.8 mA 20/20 MHz, VDD 3 V, -40 to 105 °C 14
Run supply current, FBE mode, all clocks disabled, run from RAM RIDD 8 12.3 mA 20/20 MHz, VDD 5 V, -40 to 105 °C 14
Stop mode supply current, no clocks active (except 1 kHz LPO) SIDD 2 85 µA VDD 5 V, -40 to 105 °C 14
ADC adder to Stop 86 µA ADLPC=1, ADLSMP=1, ADCO=1, MODE=10B, ADICLK=11B, 64-pin package, VDD 5 V, -40 to 105 °C 15
System and core clock frequency fSys 20 MHz Min printed as DC 16
Bus frequency fBus 20 MHz Min printed as DC 16
IRQ pulse width, asynchronous path tILIH 100 ns Asynchronous path 16
FTM external clock period tTCLK 4 tcyc 17
SWD_CLK frequency of operation J1 0 20 MHz Serial wire debug 20
SWD_CLK clock pulse width J3 20 ns Serial wire debug 20
SWD_CLK rise and fall times J4 3 ns 20
SWD_DIO input data setup time to SWD_CLK rise J9 10 ns 20
Crystal or resonator frequency, low range flo 31.25 32.768 39.0625 kHz RANGE = 0 21
Crystal or resonator frequency, high range fhi 4 20 MHz RANGE = 1 21
Internal reference clock (IRC) frequency trim range fint_t 31.25 39.0625 kHz 22
Flash and EEPROM supply voltage for program/erase Vprog/erase 2.7 5.5 V -40 °C to 105 °C 23
Thermal resistance, junction to ambient, single-layer (1S), natural convection RθJA 61 °C/W 64 QFP column, JESD51-2 single-layer board 18
Thermal resistance, junction to ambient, four-layer (2s2p), natural convection RθJA 47 °C/W 64 QFP column, JESD51-6 board 18
Thermal resistance, junction to board RθJB 32 °C/W 64 QFP column 19
Thermal resistance, junction to case RθJC 23 °C/W 64 QFP column 19
Thermal characterization parameter, junction to package top ΨJT 8 °C/W 64 QFP column, natural convection 19

CAD (KiCad official)

  • Symbol: MKE02Z64VQH2
  • Footprint: Package_QFP:LQFP-64_14x14mm_P0.8mm
  • 3D model: QFP-64(14x14) (KiCad packages3D, STEP)
  • 3D model files: mke02z64vqh2-etched.step / mke02z64vqh2-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mke02z64vqh2.step / mke02z64vqh2.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (38 pp, sha256 14e292d2911a4648, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF