Generated by kicad-footprint-generator · KiCad file format 20260206
MKE02Z64VLH2
NXP Semicon · Pre-ordered MCUs · LQFP-64(10x10)
MKE02Z64VLH2 from NXP Semicon, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTD1 | bidirectional | GPIO port D bit 1 with alternate functions KBI1_P1, FTM2_CH3 and SPI1_MOSI; high-current drive pin when used as output. |
| 2 | PTD0 | bidirectional | GPIO port D bit 0 with alternate functions KBI1_P0, FTM2_CH2 and SPI1_SCK; high-current drive pin when used as output. |
| 3 | PTH7 | bidirectional | GPIO port H bit 7, available only on the 64-pin package; no alternate function is listed in Table 19. |
| 4 | PTH6 | bidirectional | GPIO port H bit 6, available only on the 64-pin package; no alternate function is listed in Table 19. |
| 5 | PTE7 | bidirectional | GPIO port E bit 7 with alternate functions FTM2_CLK and FTM1_CH1. |
| 6 | PTH2 | bidirectional | GPIO port H bit 2 with alternate functions BUSOUT and FTM1_CH0. |
| 7 | VDD | power_in | Digital supply pin; operating voltage is 2.7 V to 5.5 V and the absolute maximum VDD is -0.3 V to 6.0 V. |
| 8 | VDDA/VREFH | power_in | Analog supply and ADC high reference, internally connected to VREFH; VDD minus VDDA must stay within ±100 mV. |
| 9 | VREFL | power_in | ADC low reference potential, equal to VSSA. |
| 10 | VSSA/VSS | power_in | Analog ground, internally connected to VSS; VSS minus VSSA must stay within ±100 mV. |
| 11 | PTB7 | bidirectional | GPIO port B bit 7 with alternate functions I2C0_SCL and EXTAL (external oscillator input). |
| 12 | PTB6 | bidirectional | GPIO port B bit 6 with alternate functions I2C0_SDA and XTAL (oscillator). |
| 13 | VSS | power_in | Digital ground pin. |
| 14 | PTH1 | bidirectional | GPIO port H bit 1 with alternate function FTM2_CH1; high-current drive pin when used as output. |
| 15 | PTH0 | bidirectional | GPIO port H bit 0 with alternate function FTM2_CH0; high-current drive pin when used as output. |
| 16 | PTE6 | bidirectional | GPIO port E bit 6; no alternate function is listed in Table 19. |
| 17 | PTE5 | bidirectional | GPIO port E bit 5; no alternate function is listed in Table 19. |
| 18 | PTB5 | bidirectional | GPIO port B bit 5 with alternate functions FTM2_CH5, SPI0_PCS0 and ACMP1_OUT; high-current drive pin when used as output. |
| 19 | PTB4 | bidirectional | GPIO port B bit 4 with alternate functions FTM2_CH4, SPI0_MISO, NMI and ACMP1_IN2; high-current drive pin when used as output. |
| 20 | PTC3 | bidirectional | GPIO port C bit 3 with alternate functions FTM2_CH3 and ADC0_SE11. |
| 21 | PTC2 | bidirectional | GPIO port C bit 2 with alternate functions FTM2_CH2 and ADC0_SE10. |
| 22 | PTD7 | bidirectional | GPIO port D bit 7 with alternate functions KBI1_P7 and UART2_TX. |
| 23 | PTD6 | bidirectional | GPIO port D bit 6 with alternate functions KBI1_P6 and UART2_RX. |
| 24 | PTD5 | bidirectional | GPIO port D bit 5 with alternate function KBI1_P5. |
| 25 | PTC1 | bidirectional | GPIO port C bit 1 with alternate functions FTM2_CH1 and ADC0_SE9. |
| 26 | PTC0 | bidirectional | GPIO port C bit 0 with alternate functions FTM2_CH0 and ADC0_SE8. |
| 27 | PTF7 | bidirectional | GPIO port F bit 7 with alternate function ADC0_SE15 (ADC input). |
| 28 | PTF6 | bidirectional | GPIO port F bit 6 with alternate function ADC0_SE14 (ADC input). |
| 29 | PTF5 | bidirectional | GPIO port F bit 5 with alternate function ADC0_SE13 (ADC input). |
| 30 | PTF4 | bidirectional | GPIO port F bit 4 with alternate function ADC0_SE12 (ADC input). |
| 31 | PTB3 | bidirectional | GPIO port B bit 3 with alternate functions KBI0_P7, SPI0_MOSI, FTM0_CH1 and ADC0_SE7. |
| 32 | PTB2 | bidirectional | GPIO port B bit 2 with alternate functions KBI0_P6, SPI0_SCK, FTM0_CH0 and ADC0_SE6. |
| 33 | PTB1 | bidirectional | GPIO port B bit 1 with alternate functions KBI0_P5, UART0_TX and ADC0_SE5. |
| 34 | PTB0 | bidirectional | GPIO port B bit 0 with alternate functions KBI0_P4, UART0_RX and ADC0_SE4. |
| 35 | PTF3 | bidirectional | GPIO port F bit 3; no alternate function is listed in Table 19. |
| 36 | PTF2 | bidirectional | GPIO port F bit 2; no alternate function is listed in Table 19. |
| 37 | PTA7 | bidirectional | GPIO port A bit 7 with alternate functions FTM2_FLT2, ACMP1_IN1 and ADC0_SE3. |
| 38 | PTA6 | bidirectional | GPIO port A bit 6 with alternate functions FTM2_FLT1, ACMP1_IN0 and ADC0_SE2. |
| 39 | PTE4 | bidirectional | GPIO port E bit 4; no alternate function is listed in Table 19. |
| 40 | VSS | power_in | Digital ground pin. |
| 41 | VDD | power_in | Digital supply pin; operating voltage is 2.7 V to 5.5 V. |
| 42 | PTF1 | bidirectional | GPIO port F bit 1; no alternate function is listed in Table 19. |
| 43 | PTF0 | bidirectional | GPIO port F bit 0; no alternate function is listed in Table 19. |
| 44 | PTD4 | bidirectional | GPIO port D bit 4 with alternate function KBI1_P4. |
| 45 | PTD3 | bidirectional | GPIO port D bit 3 with alternate functions KBI1_P3 and SPI1_PCS0. |
| 46 | PTD2 | bidirectional | GPIO port D bit 2 with alternate functions KBI1_P2 and SPI1_MISO. |
| 47 | PTA3 | bidirectional | GPIO port A bit 3, a true open-drain pin when operated as output, with alternate functions KBI0_P3, UART0_TX and I2C0_SCL. |
| 48 | PTA2 | bidirectional | GPIO port A bit 2, a true open-drain pin when operated as output, with alternate functions KBI0_P2, UART0_RX and I2C0_SDA. |
| 49 | PTA1 | bidirectional | GPIO port A bit 1 with alternate functions KBI0_P1, FTM0_CH1, ACMP0_IN1 and ADC0_SE1. |
| 50 | PTA0 | bidirectional | GPIO port A bit 0 with alternate functions KBI0_P0, FTM0_CH0, ACMP0_IN0 and ADC0_SE0. |
| 51 | PTC7 | bidirectional | GPIO port C bit 7 with alternate function UART1_TX. |
| 52 | PTC6 | bidirectional | GPIO port C bit 6 with alternate function UART1_RX. |
| 53 | PTE3 | bidirectional | GPIO port E bit 3 with alternate function SPI0_PCS0. |
| 54 | PTE2 | bidirectional | GPIO port E bit 2 with alternate function SPI0_MISO. |
| 55 | PTG3 | bidirectional | GPIO port G bit 3; no alternate function is listed in Table 19. |
| 56 | PTG2 | bidirectional | GPIO port G bit 2; no alternate function is listed in Table 19. |
| 57 | PTG1 | bidirectional | GPIO port G bit 1; no alternate function is listed in Table 19. |
| 58 | PTG0 | bidirectional | GPIO port G bit 0; no alternate function is listed in Table 19. |
| 59 | PTE1 | bidirectional | GPIO port E bit 1 with alternate function SPI0_MOSI; high-current drive pin when used as output. |
| 60 | PTE0 | bidirectional | GPIO port E bit 0 with alternate functions SPI0_SCK and FTM1_CLK; high-current drive pin when used as output. |
| 61 | PTC5 | bidirectional | GPIO port C bit 5 with alternate functions FTM1_CH1 and RTCO. |
| 62 | PTC4 | bidirectional | GPIO port C bit 4 with alternate functions RTCO, FTM1_CH0, ACMP0_IN2 and SWD_CLK. |
| 63 | PTA5 | bidirectional | GPIO port A bit 5 with alternate functions IRQ, FTM0_CLK and RESET. |
| 64 | PTA4 | bidirectional | GPIO port A bit 4 with alternate functions ACMP0_OUT and SWD_DIO. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Digital supply voltage | VDD | -0.3 | 6 | V | 7 | ||
| Maximum current into VDD | IDD | 120 | mA | 7 | |||
| Input voltage except true open drain pins | VIN | -0.3 | V | 7 | |||
| Input voltage of true open drain pins | VIN | -0.3 | 6 | V | 7 | ||
| Instantaneous maximum current single pin limit | ID | -25 | 25 | mA | Applies to all port pins | 7 | |
| Storage temperature | TSTG | -55 | 150 | °C | 6 | ||
| Solder temperature, lead-free | TSDR | 260 | °C | 6 | |||
| Electrostatic discharge voltage, human body model | VHBM | -6000 | 6000 | V | 6 | ||
| Electrostatic discharge voltage, charged-device model | VCDM | -500 | 500 | V | 6 | ||
| Latch-up current | ILAT | -100 | 100 | mA | Ambient temperature of 125 °C | 6 | |
| Operating voltage | 2.7 | 5.5 | V | 7 | |||
| Ambient temperature | TA | -40 | 105 | °C | 18 | ||
| Die junction temperature | TJ | -40 | 125 | °C | 18 | ||
| Output high current, max total IOH all ports | IOHT | -100 | mA | 5 V | 8 | ||
| Output high current, max total IOH all ports | IOHT | -60 | mA | 3 V | 8 | ||
| Output low voltage, all I/O pins standard drive | VOL | 0.8 | V | All I/O pins, standard drive; 5 V, Iload = 5 mA | 8 | ||
| Output low voltage, high-drive strength pins | VOL | 0.8 | V | High current drive pins; 5 V, Iload = 20 mA | 8 | ||
| Output low current, max total IOL all ports | IOLT | 100 | mA | 5 V | 8 | ||
| Output low current, max total IOL all ports | IOLT | 60 | mA | 3 V | 8 | ||
| Input leakage current per pin | /IIn/ | 0.1 | 1 | µA | Pins in high impedance input mode; VIN = VDD or VSS | 8 | |
| Total leakage current for all port pins | /IINTOT/ | 2 | µA | Pins in high impedance input mode; VIN = VDD or VSS | 8 | ||
| Pullup resistors, all digital inputs | RPU | 30 | 50 | kΩ | All digital inputs when enabled (all I/O pins other than PTA2 and PTA3) | 8 | |
| Pullup resistors, PTA2 and PTA3 | RPU | 30 | 60 | kΩ | PTA2 and PTA3 pins | 8 | |
| DC injection current, single pin limit | IIC | -2 | 2 | mA | VIN < VSS, VIN > VDD | 8 | |
| DC injection current, total MCU limit | IIC | -5 | 25 | mA | Total MCU limit, includes sum of all stressed pins | 8 | |
| Input capacitance, all pins | CIn | 7 | pF | 8 | |||
| RAM retention voltage | VRAM | 2 | V | 8 | |||
| POR re-arm voltage | VPOR | 1.5 | 1.75 | 2 | V | 9 | |
| Falling low-voltage detect threshold, high range | VLVDH | 4.2 | 4.3 | 4.4 | V | LVDV = 1 | 9 |
| Falling low-voltage warning threshold, high range, level 1 | VLVW1H | 4.3 | 4.4 | 4.5 | V | Level 1 falling, LVWV = 00 | 9 |
| Falling low-voltage warning threshold, high range, level 3 | VLVW3H | 4.6 | 4.6 | 4.7 | V | Level 3 falling, LVWV = 10 | 9 |
| Falling low-voltage warning threshold, high range, level 4 | VLVW4H | 4.7 | 4.7 | 4.8 | V | Level 4 falling, LVWV = 11 | 9 |
| Falling low-voltage detect threshold, low range | VLVDL | 2.56 | 2.61 | 2.66 | V | LVDV = 0 | 9 |
| Falling low-voltage warning threshold, low range, level 1 | VLVW1L | 2.62 | 2.7 | 2.78 | V | Level 1 falling, LVWV = 00 | 9 |
| Falling low-voltage warning threshold, low range, level 3 | VLVW3L | 2.82 | 2.9 | 2.98 | V | Level 3 falling, LVWV = 10 | 9 |
| Falling low-voltage warning threshold, low range, level 4 | VLVW4L | 2.92 | 3 | 3.08 | V | Level 4 falling, LVWV = 11 | 9 |
| Buffered bandgap output | VBG | 1.14 | 1.16 | 1.18 | V | Factory trimmed at VDD = 5.0 V, Temp = 25 °C | 9 |
| Stop mode supply current, no clocks active | SIDD | 2 | 85 | µA | No clocks active (except 1 kHz LPO clock); VDD 5 V; -40 to 105 °C | 14 | |
| Stop mode supply current, no clocks active | SIDD | 1.9 | 80 | µA | No clocks active (except 1 kHz LPO clock); VDD 3 V; -40 to 105 °C | 14 | |
| Run supply current, FBE, all clocks enabled, run from RAM | RIDD | 9 | 14.8 | mA | 20/20 MHz; VDD 5 V; -40 to 105 °C | 14 | |
| Run supply current, FBE, all clocks enabled, run from RAM | RIDD | 8.8 | 11.8 | mA | 20/20 MHz; VDD 3 V; -40 to 105 °C | 14 | |
| Run supply current, FBE, all clocks disabled, run from RAM | RIDD | 8 | 12.3 | mA | 20/20 MHz; VDD 5 V; -40 to 105 °C | 14 | |
| Run supply current, FBE, all clocks disabled, run from RAM | RIDD | 7.8 | 9.2 | mA | 20/20 MHz; VDD 3 V; -40 to 105 °C | 14 | |
| System and core clock frequency | fSys | 20 | MHz | 16 | |||
| Bus frequency | fBus | 20 | MHz | tcyc = 1/fBus | 16 | ||
| Internal low power oscillator frequency | fLPO | 0.67 | 1 | 1.25 | KHz | 16 | |
| Crystal or resonator frequency, low range | flo | 31.25 | 32.768 | 39.0625 | kHz | RANGE = 0; -40 to 105 °C ambient | 21 |
| Crystal or resonator frequency, high range | fhi | 4 | 20 | MHz | RANGE = 1; -40 to 105 °C ambient | 21 | |
| Internal reference clock (IRC) frequency trim range | fint_t | 31.25 | 39.0625 | kHz | 22 | ||
| DCO output frequency range | fdco | 16 | 20 | MHz | FLL reference = fint_t, flo, or fhi/RDIV | 22 | |
| Factory trimmed internal oscillator accuracy | Δfint_ft | -0.5 | 0.5 | % | T = 25 °C, VDD = 5 V | 22 | |
| Deviation of IRC over temperature when trimmed at 25 °C | Δfint_t | -1 | 0.5 | % | Trimmed at T = 25 °C, VDD = 5 V; over -40 °C to 105 °C | 22 | |
| Frequency accuracy of DCO output using factory trim value | Δfdco_ft | -1.5 | 1 | % | Over temperature range -40 °C to 105 °C | 22 | |
| Thermal resistance, junction to ambient, single-layer (1S), natural convection | RθJA | 71 | °C/W | 64 LQFP | 18 | ||
| Thermal resistance, junction to ambient, four-layer (2s2p), natural convection | RθJA | 53 | °C/W | 64 LQFP | 18 | ||
| Thermal resistance, junction to board | RθJB | 35 | °C/W | 64 LQFP | 19 | ||
| Thermal resistance, junction to case | RθJC | 20 | °C/W | 64 LQFP | 19 | ||
| Thermal characterization parameter, junction to package top | ΨJT | 5 | °C/W | 64 LQFP; natural convection | 19 |
CAD (KiCad official)
- Symbol:
MKE02Z64VLH2 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
mke02z64vlh2-etched.step/mke02z64vlh2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mke02z64vlh2.step/mke02z64vlh2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (38 pp, sha256
14e292d2911a4648, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).