main
Ray
Publish 0.1.0
c6b957b
MKE02Z64VLC4
NXP Semicon · NXP MCU · LQFP-32(7x7)
MKE02Z64VLC4 from NXP Semicon, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTD1 | bidirectional | General-purpose I/O PTD1, high source/sink current drive pin as output, with alternate functions KBI1_P1, FTM2_CH3 and SPI1_MOSI. |
| 2 | PTD0 | bidirectional | General-purpose I/O PTD0, high source/sink current drive pin as output, with alternate functions KBI1_P0, FTM2_CH2 and SPI1_SCK. |
| 3 | VDD | power_in | Positive power supply input (device voltage range 2.7 to 5.5 V). |
| 4 | VDDA/VREFH | power_in | Analog power supply (VDDA) and ADC high voltage reference (VREFH), which are internally connected. |
| 5 | VREFL | power_in | ADC low voltage reference input. |
| 6 | VSSA/VSS | power_in | Analog ground (VSSA) and digital ground (VSS), which are internally connected. |
| 7 | PTB7 | bidirectional | General-purpose I/O PTB7 with alternate functions I2C0_SCL and EXTAL (oscillator input). |
| 8 | PTB6 | bidirectional | General-purpose I/O PTB6 with alternate functions I2C0_SDA and XTAL (oscillator output). |
| 9 | PTB5 | bidirectional | General-purpose I/O PTB5, high source/sink current drive pin as output, with alternate functions FTM2_CH5, SPI0_PCS0 and ACMP1_OUT. |
| 10 | PTB4 | bidirectional | General-purpose I/O PTB4, high source/sink current drive pin as output, with alternate functions FTM2_CH4, SPI0_MISO, NMI and ACMP1_IN2. |
| 11 | PTC3 | bidirectional | General-purpose I/O PTC3 with alternate functions FTM2_CH3 and ADC0_SE11. |
| 12 | PTC2 | bidirectional | General-purpose I/O PTC2 with alternate functions FTM2_CH2 and ADC0_SE10. |
| 13 | PTC1 | bidirectional | General-purpose I/O PTC1 with alternate functions FTM2_CH1 and ADC0_SE9. |
| 14 | PTC0 | bidirectional | General-purpose I/O PTC0 with alternate functions FTM2_CH0 and ADC0_SE8. |
| 15 | PTB3 | bidirectional | General-purpose I/O PTB3 with alternate functions KBI0_P7, SPI0_MOSI, FTM0_CH1 and ADC0_SE7. |
| 16 | PTB2 | bidirectional | General-purpose I/O PTB2 with alternate functions KBI0_P6, SPI0_SCK, FTM0_CH0 and ADC0_SE6. |
| 17 | PTB1 | bidirectional | General-purpose I/O PTB1 with alternate functions KBI0_P5, UART0_TX and ADC0_SE5. |
| 18 | PTB0 | bidirectional | General-purpose I/O PTB0 with alternate functions KBI0_P4, UART0_RX and ADC0_SE4. |
| 19 | PTA7 | bidirectional | General-purpose I/O PTA7 with alternate functions FTM2_FLT2, ACMP1_IN1 and ADC0_SE3. |
| 20 | PTA6 | bidirectional | General-purpose I/O PTA6 with alternate functions FTM2_FLT1, ACMP1_IN0 and ADC0_SE2. |
| 21 | PTD3 | bidirectional | General-purpose I/O PTD3 with alternate functions KBI1_P3 and SPI1_PCS0. |
| 22 | PTD2 | bidirectional | General-purpose I/O PTD2 with alternate functions KBI1_P2 and SPI1_MISO. |
| 23 | PTA3 | bidirectional | General-purpose I/O PTA3, true open-drain pin when operated as output, with alternate functions KBI0_P3, UART0_TX and I2C0_SCL. |
| 24 | PTA2 | bidirectional | General-purpose I/O PTA2, true open-drain pin when operated as output, with alternate functions KBI0_P2, UART0_RX and I2C0_SDA. |
| 25 | PTA1 | bidirectional | General-purpose I/O PTA1 with alternate functions KBI0_P1, FTM0_CH1, ACMP0_IN1 and ADC0_SE1. |
| 26 | PTA0 | bidirectional | General-purpose I/O PTA0 with alternate functions KBI0_P0, FTM0_CH0, ACMP0_IN0 and ADC0_SE0. |
| 27 | PTC7 | bidirectional | General-purpose I/O PTC7 with alternate function UART1_TX. |
| 28 | PTC6 | bidirectional | General-purpose I/O PTC6 with alternate function UART1_RX. |
| 29 | PTC5 | bidirectional | General-purpose I/O PTC5 with alternate functions FTM1_CH1 and RTCO. |
| 30 | PTC4 | bidirectional | General-purpose I/O PTC4 with alternate functions RTCO, FTM1_CH0, ACMP0_IN2 and SWD_CLK. |
| 31 | PTA5 | bidirectional | General-purpose I/O PTA5 with alternate functions IRQ, FTM0_CLK and RESET. |
| 32 | PTA4 | bidirectional | General-purpose I/O PTA4 with alternate functions ACMP0_OUT and SWD_DIO. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-32(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 32 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage | 2.7 | 5.5 | V | 7 | |||
| Digital supply voltage | VDD | -0.3 | 6 | V | 7 | ||
| Maximum current into VDD | IDD | 120 | mA | 7 | |||
| Input voltage of true open drain pins | -0.3 | 6 | V | 7 | |||
| Input voltage except true open drain pins | VIN | -0.3 | V | VDD + 0.3 printed with footnote 1 (maximum rating of VDD also applies to VIN) | 7 | ||
| Instantaneous maximum current single pin limit (applies to all port pins) | ID | -25 | 25 | mA | 7 | ||
| Output low voltage, all I/O pins, standard-drive strength | VOL | 0.8 | V | 5 V, Iload = 5 mA | 8 | ||
| Output low voltage, high current drive pins, high-drive strength | VOL | 0.8 | V | 5 V, Iload = 20 mA | 8 | ||
| Max total IOH for all ports | IOHT | -100 | mA | 5 V | 8 | ||
| Max total IOH for all ports | IOHT | -60 | mA | 3 V | 8 | ||
| Max total IOL for all ports | IOLT | 100 | mA | 5 V | 8 | ||
| Max total IOL for all ports | IOLT | 60 | mA | 3 V | 8 | ||
| Input leakage current, per pin (pins in high impedance input mode) | /IIn/ | 0.1 | 1 | µA | VIN = VDD or VSS | 8 | |
| Pullup resistors, all digital inputs when enabled (all I/O pins other than PTA2 and PTA3) | RPU | 30 | 50 | kΩ | 8 | ||
| Pullup resistors, PTA2 and PTA3 pins | RPU4 | 30 | 60 | kΩ | 8 | ||
| DC injection current, single pin limit | IIC | -2 | 2 | mA | VIN < VSS, VIN > VDD | 8 | |
| DC injection current, total MCU limit | IIC | -5 | 25 | mA | includes sum of all stressed pins | 8 | |
| Input capacitance, all pins | CIn | 7 | pF | 8 | |||
| RAM retention voltage | VRAM | 2 | V | 8 | |||
| POR re-arm voltage | VPOR | 1.5 | 1.75 | 2 | V | 9 | |
| Falling low-voltage detect threshold, high range | VLVDH | 4.2 | 4.3 | 4.4 | V | LVDV = 1 | 9 |
| Falling low-voltage warning threshold, high range, level 1 | VLVW1H | 4.3 | 4.4 | 4.5 | V | LVWV = 00 | 9 |
| Falling low-voltage warning threshold, high range, level 2 | VLVW2H | 4.5 | 4.5 | 4.6 | V | LVWV = 01 | 9 |
| Falling low-voltage warning threshold, high range, level 3 | VLVW3H | 4.6 | 4.6 | 4.7 | V | LVWV = 10 | 9 |
| Falling low-voltage warning threshold, high range, level 4 | VLVW4H | 4.7 | 4.7 | 4.8 | V | LVWV = 11 | 9 |
| Falling low-voltage detect threshold, low range | VLVDL | 2.56 | 2.61 | 2.66 | V | LVDV = 0 | 9 |
| Falling low-voltage warning threshold, low range, level 1 | VLVW1L | 2.62 | 2.7 | 2.78 | V | LVWV = 00 | 9 |
| Falling low-voltage warning threshold, low range, level 2 | VLVW2L | 2.72 | 2.8 | 2.88 | V | LVWV = 01 | 9 |
| Falling low-voltage warning threshold, low range, level 3 | VLVW3L | 2.82 | 2.9 | 2.98 | V | LVWV = 10 | 9 |
| Falling low-voltage warning threshold, low range, level 4 | VLVW4L | 2.92 | 3 | 3.08 | V | LVWV = 11 | 9 |
| Buffered bandgap output | VBG | 1.14 | 1.16 | 1.18 | V | Factory trimmed at VDD = 5.0 V, Temp = 25 °C | 9 |
| High range low-voltage detect/warning hysteresis | VHYSH | 100 | mV | 9 | |||
| Stop mode supply current, no clocks active (except 1 kHz LPO clock) | SIDD | 2 | 85 | µA | VDD = 5 V, -40 to 105 °C | 14 | |
| Stop mode supply current, no clocks active (except 1 kHz LPO clock) | SIDD | 1.9 | 80 | µA | VDD = 3 V, -40 to 105 °C | 14 | |
| Run supply current, FBE mode, all modules clocks enabled, run from RAM | RIDD | 9 | 14.8 | mA | VDD = 5 V, 20/20 MHz, -40 to 105 °C | 14 | |
| Run supply current, FBE mode, all modules clocks enabled, run from RAM | RIDD | 8.8 | 11.8 | mA | VDD = 3 V, 20/20 MHz, -40 to 105 °C | 14 | |
| Run supply current, FBE mode, all modules clocks disabled, run from RAM | RIDD | 8 | 12.3 | mA | VDD = 5 V, 20/20 MHz, -40 to 105 °C | 14 | |
| Run supply current, FBE mode, all modules clocks disabled, run from RAM | RIDD | 7.8 | 9.2 | mA | VDD = 3 V, 20/20 MHz, -40 to 105 °C | 14 | |
| System and core clock | fSys | 40 | MHz | 16 | |||
| Bus frequency (tcyc = 1/fBus) | fBus | 20 | MHz | 16 | |||
| Internal low power oscillator frequency | fLPO | 0.67 | 1 | 1.25 | KHz | 16 | |
| Die junction temperature | TJ | -40 | 125 | °C | 18 | ||
| Ambient temperature | TA | -40 | 105 | °C | 18 | ||
| Thermal resistance, junction to ambient (natural convection), 32-pin LQFP | RθJA | 86 | °C/W | Single-layer (1S) | 19 | ||
| Thermal resistance, junction to ambient (natural convection), 32-pin LQFP | RθJA | 57 | °C/W | Four-layer (2s2p) | 19 | ||
| Thermal resistance, junction to ambient (200 ft./min. air speed), 32-pin LQFP | RθJMA | 72 | °C/W | Single-layer (1S) | 19 | ||
| Thermal resistance, junction to board, 32-pin LQFP | RθJB | 33 | °C/W | 19 | |||
| Thermal resistance, junction to case, 32-pin LQFP | RθJC | 24 | °C/W | 19 | |||
| Crystal or resonator frequency, low range | flo | 31.25 | 32.768 | 39.0625 | kHz | RANGE = 0 | 21 |
| Crystal or resonator frequency, high range | fhi | 4 | 20 | MHz | RANGE = 1 | 21 | |
| Internal reference clock (IRC) frequency trim range | fint_t | 31.25 | 39.0625 | kHz | 22 | ||
| Internal reference clock frequency, factory trimmed | fint_ft | 31.25 | kHz | T = 25 °C, VDD = 5 V | 22 | ||
| DCO output frequency range | fdco | 32 | 40 | MHz | FLL reference = fint_t, flo, or fhi/RDIV | 22 | |
| Factory trimmed internal oscillator accuracy | Δfint_ft | -0.5 | 0.5 | % | T = 25 °C, VDD = 5 V | 22 | |
| Deviation of IRC over temperature when trimmed at T = 25 °C, VDD = 5 V | Δfint_t | -1 | 0.5 | % | Over temperature range from -40 °C to 105 °C | 22 | |
| Deviation of IRC over temperature when trimmed at T = 25 °C, VDD = 5 V | Δfint_t | -0.5 | 0.5 | % | Over temperature range from 0 °C to 105 °C | 22 | |
| Frequency accuracy of DCO output using factory trim value | Δfdco_ft | -1.5 | 1 | % | Over temperature range from -40 °C to 105 °C | 22 | |
| Frequency accuracy of DCO output using factory trim value | Δfdco_ft | -1 | 1 | % | Over temperature range from 0 °C to 105 °C | 22 | |
| FLL acquisition time | tAcquire | 2 | ms | 22 | |||
| Long term jitter of DCO output clock (averaged over 2 ms interval) | CJitter | 0.02 | 0.2 | %fdco | 23 | ||
| Supply voltage for read operation | VRead | 2.7 | 5.5 | V | 23 | ||
| 12-bit ADC supply voltage, absolute | VDDA | 2.7 | 5.5 | V | 25 | ||
| Delta to VDD, VDD-VDDA | ΔVDDA | -100 | 0 | 100 | mV | 25 | |
| ADC conversion clock frequency, high speed | fADCK | 0.4 | 8 | MHz | ADLPC = 0 | 25 | |
| Comparator supply voltage | VDDA | 2.7 | 5.5 | V | 28 | ||
| Comparator supply current, operation mode | IDDA | 10 | 20 | µA | 28 | ||
| Analog comparator input offset voltage | VAIO | 40 | mV | 28 | |||
| SWD operating voltage | 2.7 | 5.5 | V | 20 | |||
| SWD_CLK frequency of operation, serial wire debug | J1 | 0 | 20 | MHz | 20 |
CAD (KiCad official)
- Symbol:
MKE02Z64VLC4 - Footprint:
Package_QFP:LQFP-32_7x7mm_P0.8mm - 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files:
mke02z64vlc4-etched.step/mke02z64vlc4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mke02z64vlc4.step/mke02z64vlc4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (37 pp, sha256
dd3ab7b95cbae8e4, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MKE02Z64VLC4
**NXP Semicon** · NXP MCU · LQFP-32(7x7)
MKE02Z64VLC4 from NXP Semicon, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTD1 | bidirectional | General-purpose I/O PTD1, high source/sink current drive pin as output, with alternate functions KBI1_P1, FTM2_CH3 and SPI1_MOSI. |
| 2 | PTD0 | bidirectional | General-purpose I/O PTD0, high source/sink current drive pin as output, with alternate functions KBI1_P0, FTM2_CH2 and SPI1_SCK. |
| 3 | VDD | power_in | Positive power supply input (device voltage range 2.7 to 5.5 V). |
| 4 | VDDA/VREFH | power_in | Analog power supply (VDDA) and ADC high voltage reference (VREFH), which are internally connected. |
| 5 | VREFL | power_in | ADC low voltage reference input. |
| 6 | VSSA/VSS | power_in | Analog ground (VSSA) and digital ground (VSS), which are internally connected. |
| 7 | PTB7 | bidirectional | General-purpose I/O PTB7 with alternate functions I2C0_SCL and EXTAL (oscillator input). |
| 8 | PTB6 | bidirectional | General-purpose I/O PTB6 with alternate functions I2C0_SDA and XTAL (oscillator output). |
| 9 | PTB5 | bidirectional | General-purpose I/O PTB5, high source/sink current drive pin as output, with alternate functions FTM2_CH5, SPI0_PCS0 and ACMP1_OUT. |
| 10 | PTB4 | bidirectional | General-purpose I/O PTB4, high source/sink current drive pin as output, with alternate functions FTM2_CH4, SPI0_MISO, NMI and ACMP1_IN2. |
| 11 | PTC3 | bidirectional | General-purpose I/O PTC3 with alternate functions FTM2_CH3 and ADC0_SE11. |
| 12 | PTC2 | bidirectional | General-purpose I/O PTC2 with alternate functions FTM2_CH2 and ADC0_SE10. |
| 13 | PTC1 | bidirectional | General-purpose I/O PTC1 with alternate functions FTM2_CH1 and ADC0_SE9. |
| 14 | PTC0 | bidirectional | General-purpose I/O PTC0 with alternate functions FTM2_CH0 and ADC0_SE8. |
| 15 | PTB3 | bidirectional | General-purpose I/O PTB3 with alternate functions KBI0_P7, SPI0_MOSI, FTM0_CH1 and ADC0_SE7. |
| 16 | PTB2 | bidirectional | General-purpose I/O PTB2 with alternate functions KBI0_P6, SPI0_SCK, FTM0_CH0 and ADC0_SE6. |
| 17 | PTB1 | bidirectional | General-purpose I/O PTB1 with alternate functions KBI0_P5, UART0_TX and ADC0_SE5. |
| 18 | PTB0 | bidirectional | General-purpose I/O PTB0 with alternate functions KBI0_P4, UART0_RX and ADC0_SE4. |
| 19 | PTA7 | bidirectional | General-purpose I/O PTA7 with alternate functions FTM2_FLT2, ACMP1_IN1 and ADC0_SE3. |
| 20 | PTA6 | bidirectional | General-purpose I/O PTA6 with alternate functions FTM2_FLT1, ACMP1_IN0 and ADC0_SE2. |
| 21 | PTD3 | bidirectional | General-purpose I/O PTD3 with alternate functions KBI1_P3 and SPI1_PCS0. |
| 22 | PTD2 | bidirectional | General-purpose I/O PTD2 with alternate functions KBI1_P2 and SPI1_MISO. |
| 23 | PTA3 | bidirectional | General-purpose I/O PTA3, true open-drain pin when operated as output, with alternate functions KBI0_P3, UART0_TX and I2C0_SCL. |
| 24 | PTA2 | bidirectional | General-purpose I/O PTA2, true open-drain pin when operated as output, with alternate functions KBI0_P2, UART0_RX and I2C0_SDA. |
| 25 | PTA1 | bidirectional | General-purpose I/O PTA1 with alternate functions KBI0_P1, FTM0_CH1, ACMP0_IN1 and ADC0_SE1. |
| 26 | PTA0 | bidirectional | General-purpose I/O PTA0 with alternate functions KBI0_P0, FTM0_CH0, ACMP0_IN0 and ADC0_SE0. |
| 27 | PTC7 | bidirectional | General-purpose I/O PTC7 with alternate function UART1_TX. |
| 28 | PTC6 | bidirectional | General-purpose I/O PTC6 with alternate function UART1_RX. |
| 29 | PTC5 | bidirectional | General-purpose I/O PTC5 with alternate functions FTM1_CH1 and RTCO. |
| 30 | PTC4 | bidirectional | General-purpose I/O PTC4 with alternate functions RTCO, FTM1_CH0, ACMP0_IN2 and SWD_CLK. |
| 31 | PTA5 | bidirectional | General-purpose I/O PTA5 with alternate functions IRQ, FTM0_CLK and RESET. |
| 32 | PTA4 | bidirectional | General-purpose I/O PTA4 with alternate functions ACMP0_OUT and SWD_DIO. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-32(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 32 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage | | 2.7 | | 5.5 | V | | 7 |
| Digital supply voltage | VDD | -0.3 | | 6 | V | | 7 |
| Maximum current into VDD | IDD | | | 120 | mA | | 7 |
| Input voltage of true open drain pins | | -0.3 | | 6 | V | | 7 |
| Input voltage except true open drain pins | VIN | -0.3 | | | V | VDD + 0.3 printed with footnote 1 (maximum rating of VDD also applies to VIN) | 7 |
| Instantaneous maximum current single pin limit (applies to all port pins) | ID | -25 | | 25 | mA | | 7 |
| Output low voltage, all I/O pins, standard-drive strength | VOL | | | 0.8 | V | 5 V, Iload = 5 mA | 8 |
| Output low voltage, high current drive pins, high-drive strength | VOL | | | 0.8 | V | 5 V, Iload = 20 mA | 8 |
| Max total IOH for all ports | IOHT | | | -100 | mA | 5 V | 8 |
| Max total IOH for all ports | IOHT | | | -60 | mA | 3 V | 8 |
| Max total IOL for all ports | IOLT | | | 100 | mA | 5 V | 8 |
| Max total IOL for all ports | IOLT | | | 60 | mA | 3 V | 8 |
| Input leakage current, per pin (pins in high impedance input mode) | /IIn/ | | 0.1 | 1 | µA | VIN = VDD or VSS | 8 |
| Pullup resistors, all digital inputs when enabled (all I/O pins other than PTA2 and PTA3) | RPU | 30 | | 50 | kΩ | | 8 |
| Pullup resistors, PTA2 and PTA3 pins | RPU4 | 30 | | 60 | kΩ | | 8 |
| DC injection current, single pin limit | IIC | -2 | | 2 | mA | VIN < VSS, VIN > VDD | 8 |
| DC injection current, total MCU limit | IIC | -5 | | 25 | mA | includes sum of all stressed pins | 8 |
| Input capacitance, all pins | CIn | | | 7 | pF | | 8 |
| RAM retention voltage | VRAM | 2 | | | V | | 8 |
| POR re-arm voltage | VPOR | 1.5 | 1.75 | 2 | V | | 9 |
| Falling low-voltage detect threshold, high range | VLVDH | 4.2 | 4.3 | 4.4 | V | LVDV = 1 | 9 |
| Falling low-voltage warning threshold, high range, level 1 | VLVW1H | 4.3 | 4.4 | 4.5 | V | LVWV = 00 | 9 |
| Falling low-voltage warning threshold, high range, level 2 | VLVW2H | 4.5 | 4.5 | 4.6 | V | LVWV = 01 | 9 |
| Falling low-voltage warning threshold, high range, level 3 | VLVW3H | 4.6 | 4.6 | 4.7 | V | LVWV = 10 | 9 |
| Falling low-voltage warning threshold, high range, level 4 | VLVW4H | 4.7 | 4.7 | 4.8 | V | LVWV = 11 | 9 |
| Falling low-voltage detect threshold, low range | VLVDL | 2.56 | 2.61 | 2.66 | V | LVDV = 0 | 9 |
| Falling low-voltage warning threshold, low range, level 1 | VLVW1L | 2.62 | 2.7 | 2.78 | V | LVWV = 00 | 9 |
| Falling low-voltage warning threshold, low range, level 2 | VLVW2L | 2.72 | 2.8 | 2.88 | V | LVWV = 01 | 9 |
| Falling low-voltage warning threshold, low range, level 3 | VLVW3L | 2.82 | 2.9 | 2.98 | V | LVWV = 10 | 9 |
| Falling low-voltage warning threshold, low range, level 4 | VLVW4L | 2.92 | 3 | 3.08 | V | LVWV = 11 | 9 |
| Buffered bandgap output | VBG | 1.14 | 1.16 | 1.18 | V | Factory trimmed at VDD = 5.0 V, Temp = 25 °C | 9 |
| High range low-voltage detect/warning hysteresis | VHYSH | | 100 | | mV | | 9 |
| Stop mode supply current, no clocks active (except 1 kHz LPO clock) | SIDD | | 2 | 85 | µA | VDD = 5 V, -40 to 105 °C | 14 |
| Stop mode supply current, no clocks active (except 1 kHz LPO clock) | SIDD | | 1.9 | 80 | µA | VDD = 3 V, -40 to 105 °C | 14 |
| Run supply current, FBE mode, all modules clocks enabled, run from RAM | RIDD | | 9 | 14.8 | mA | VDD = 5 V, 20/20 MHz, -40 to 105 °C | 14 |
| Run supply current, FBE mode, all modules clocks enabled, run from RAM | RIDD | | 8.8 | 11.8 | mA | VDD = 3 V, 20/20 MHz, -40 to 105 °C | 14 |
| Run supply current, FBE mode, all modules clocks disabled, run from RAM | RIDD | | 8 | 12.3 | mA | VDD = 5 V, 20/20 MHz, -40 to 105 °C | 14 |
| Run supply current, FBE mode, all modules clocks disabled, run from RAM | RIDD | | 7.8 | 9.2 | mA | VDD = 3 V, 20/20 MHz, -40 to 105 °C | 14 |
| System and core clock | fSys | | | 40 | MHz | | 16 |
| Bus frequency (tcyc = 1/fBus) | fBus | | | 20 | MHz | | 16 |
| Internal low power oscillator frequency | fLPO | 0.67 | 1 | 1.25 | KHz | | 16 |
| Die junction temperature | TJ | -40 | | 125 | °C | | 18 |
| Ambient temperature | TA | -40 | | 105 | °C | | 18 |
| Thermal resistance, junction to ambient (natural convection), 32-pin LQFP | RθJA | | 86 | | °C/W | Single-layer (1S) | 19 |
| Thermal resistance, junction to ambient (natural convection), 32-pin LQFP | RθJA | | 57 | | °C/W | Four-layer (2s2p) | 19 |
| Thermal resistance, junction to ambient (200 ft./min. air speed), 32-pin LQFP | RθJMA | | 72 | | °C/W | Single-layer (1S) | 19 |
| Thermal resistance, junction to board, 32-pin LQFP | RθJB | | 33 | | °C/W | | 19 |
| Thermal resistance, junction to case, 32-pin LQFP | RθJC | | 24 | | °C/W | | 19 |
| Crystal or resonator frequency, low range | flo | 31.25 | 32.768 | 39.0625 | kHz | RANGE = 0 | 21 |
| Crystal or resonator frequency, high range | fhi | 4 | | 20 | MHz | RANGE = 1 | 21 |
| Internal reference clock (IRC) frequency trim range | fint_t | 31.25 | | 39.0625 | kHz | | 22 |
| Internal reference clock frequency, factory trimmed | fint_ft | | 31.25 | | kHz | T = 25 °C, VDD = 5 V | 22 |
| DCO output frequency range | fdco | 32 | | 40 | MHz | FLL reference = fint_t, flo, or fhi/RDIV | 22 |
| Factory trimmed internal oscillator accuracy | Δfint_ft | -0.5 | | 0.5 | % | T = 25 °C, VDD = 5 V | 22 |
| Deviation of IRC over temperature when trimmed at T = 25 °C, VDD = 5 V | Δfint_t | -1 | | 0.5 | % | Over temperature range from -40 °C to 105 °C | 22 |
| Deviation of IRC over temperature when trimmed at T = 25 °C, VDD = 5 V | Δfint_t | -0.5 | | 0.5 | % | Over temperature range from 0 °C to 105 °C | 22 |
| Frequency accuracy of DCO output using factory trim value | Δfdco_ft | -1.5 | | 1 | % | Over temperature range from -40 °C to 105 °C | 22 |
| Frequency accuracy of DCO output using factory trim value | Δfdco_ft | -1 | | 1 | % | Over temperature range from 0 °C to 105 °C | 22 |
| FLL acquisition time | tAcquire | | | 2 | ms | | 22 |
| Long term jitter of DCO output clock (averaged over 2 ms interval) | CJitter | | 0.02 | 0.2 | %fdco | | 23 |
| Supply voltage for read operation | VRead | 2.7 | | 5.5 | V | | 23 |
| 12-bit ADC supply voltage, absolute | VDDA | 2.7 | | 5.5 | V | | 25 |
| Delta to VDD, VDD-VDDA | ΔVDDA | -100 | 0 | 100 | mV | | 25 |
| ADC conversion clock frequency, high speed | fADCK | 0.4 | | 8 | MHz | ADLPC = 0 | 25 |
| Comparator supply voltage | VDDA | 2.7 | | 5.5 | V | | 28 |
| Comparator supply current, operation mode | IDDA | | 10 | 20 | µA | | 28 |
| Analog comparator input offset voltage | VAIO | | | 40 | mV | | 28 |
| SWD operating voltage | | 2.7 | | 5.5 | V | | 20 |
| SWD_CLK frequency of operation, serial wire debug | J1 | 0 | | 20 | MHz | | 20 |
## CAD (KiCad official)
- Symbol: `MKE02Z64VLC4`
- Footprint: `Package_QFP:LQFP-32_7x7mm_P0.8mm`
- 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files: `mke02z64vlc4-etched.step` / `mke02z64vlc4-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mke02z64vlc4.step` / `mke02z64vlc4.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [NXP Semicon datasheet](https://www.nxp.com/docs/en/data-sheet/MKE02Z64VLC4.pdf) (37 pp, sha256 `dd3ab7b95cbae8e4`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mke02z64vlc4-datasheet.pdf)