Generated by kicad-footprint-generator · KiCad file format 20260206
MKE02Z64VLC2
NXP Semicon · Pre-ordered MCUs · LQFP-32(7x7)
MKE02Z64VLC2 from NXP Semicon, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTD1 | bidirectional | General-purpose I/O with alternates KBI1_P1, FTM2_CH3 and SPI1_MOSI; it is a high-current drive pin when used as output, with internal clamps to VSS and VDD, a ±25 mA single-pin limit, and a 30-50 kΩ pullup when enabled. |
| 2 | PTD0 | bidirectional | General-purpose I/O with alternates KBI1_P0, FTM2_CH2 and SPI1_SCK; it is a high-current drive pin when used as output, with internal clamps to VSS and VDD, a ±25 mA single-pin limit, and a 30-50 kΩ pullup when enabled. |
| 3 | VDD | power_in | Digital supply with operating voltage 2.7 to 5.5 V and absolute maximum rating -0.3 to 6.0 V. |
| 4 | VDDA/VREFH | power_in | Analog supply 2.7 to 5.5 V that must stay within ±100 mV of VDD, and the ADC high reference VREFH, which is internally connected to VDDA. |
| 5 | VREFL | power_in | ADC low reference, which is the reference potential VREFL = VSSA. |
| 6 | VSSA/VSS | power_in | Ground for the digital and analog domains, with VSSA internally connected to VSS and VSSA within ±100 mV of VSS. |
| 7 | PTB7 | bidirectional | General-purpose I/O with alternates I2C0_SCL and EXTAL, where EXTAL (oscillator input for a 32.768 kHz or 4-20 MHz crystal or resonator) is the highest-priority function; the pin is clamped to VSS and VDD with a 30-50 kΩ pullup when enabled. |
| 8 | PTB6 | bidirectional | General-purpose I/O with alternates I2C0_SDA and XTAL, where XTAL (oscillator output for a 32.768 kHz or 4-20 MHz crystal or resonator) is the highest-priority function; the pin is clamped to VSS and VDD with a 30-50 kΩ pullup when enabled. |
| 9 | PTB5 | bidirectional | General-purpose I/O with alternates FTM2_CH5, SPI0_PCS0 and ACMP1_OUT; it is a high-current drive pin when used as output, with internal clamps to VSS and VDD and a ±25 mA single-pin limit. |
| 10 | PTB4 | bidirectional | General-purpose I/O with alternates FTM2_CH4, SPI0_MISO, NMI and ACMP1_IN2 (ACMP1_IN2 is highest priority); it is a high-current drive pin when used as output, with internal clamps to VSS and VDD and a ±25 mA single-pin limit. |
| 11 | PTC3 | bidirectional | General-purpose I/O with alternates FTM2_CH3 and ADC0_SE11, with internal clamps to VSS and VDD, a ±25 mA single-pin limit, and a 30-50 kΩ pullup when enabled. |
| 12 | PTC2 | bidirectional | General-purpose I/O with alternates FTM2_CH2 and ADC0_SE10, with internal clamps to VSS and VDD, a ±25 mA single-pin limit, and a 30-50 kΩ pullup when enabled. |
| 13 | PTC1 | bidirectional | General-purpose I/O with alternates FTM2_CH1 and ADC0_SE9, with internal clamps to VSS and VDD, a ±25 mA single-pin limit, and a 30-50 kΩ pullup when enabled. |
| 14 | PTC0 | bidirectional | General-purpose I/O with alternates FTM2_CH0 and ADC0_SE8, with internal clamps to VSS and VDD, a ±25 mA single-pin limit, and a 30-50 kΩ pullup when enabled. |
| 15 | PTB3 | bidirectional | General-purpose I/O with alternates KBI0_P7, SPI0_MOSI, FTM0_CH1 and ADC0_SE7, with internal clamps to VSS and VDD, a ±25 mA single-pin limit, and a 30-50 kΩ pullup when enabled. |
| 16 | PTB2 | bidirectional | General-purpose I/O with alternates KBI0_P6, SPI0_SCK, FTM0_CH0 and ADC0_SE6, with internal clamps to VSS and VDD, a ±25 mA single-pin limit, and a 30-50 kΩ pullup when enabled. |
| 17 | PTB1 | bidirectional | General-purpose I/O with alternates KBI0_P5, UART0_TX and ADC0_SE5, with internal clamps to VSS and VDD, a ±25 mA single-pin limit, and a 30-50 kΩ pullup when enabled. |
| 18 | PTB0 | bidirectional | General-purpose I/O with alternates KBI0_P4, UART0_RX and ADC0_SE4, with internal clamps to VSS and VDD, a ±25 mA single-pin limit, and a 30-50 kΩ pullup when enabled. |
| 19 | PTA7 | bidirectional | General-purpose I/O with alternates FTM2_FLT2, ACMP1_IN1 and ADC0_SE3, with internal clamps to VSS and VDD, a ±25 mA single-pin limit, and a 30-50 kΩ pullup when enabled. |
| 20 | PTA6 | bidirectional | General-purpose I/O with alternates FTM2_FLT1, ACMP1_IN0 and ADC0_SE2, with internal clamps to VSS and VDD, a ±25 mA single-pin limit, and a 30-50 kΩ pullup when enabled. |
| 21 | PTD3 | bidirectional | General-purpose I/O with alternates KBI1_P3 and SPI1_PCS0, with internal clamps to VSS and VDD, a ±25 mA single-pin limit, and a 30-50 kΩ pullup when enabled. |
| 22 | PTD2 | bidirectional | General-purpose I/O with alternates KBI1_P2 and SPI1_MISO, with internal clamps to VSS and VDD, a ±25 mA single-pin limit, and a 30-50 kΩ pullup when enabled. |
| 23 | PTA3 | bidirectional | True open-drain I/O with alternates KBI0_P3, UART0_TX and I2C0_SCL, clamped only to VSS with a 30-60 kΩ pullup when enabled and a ±25 mA single-pin limit. |
| 24 | PTA2 | bidirectional | True open-drain I/O with alternates KBI0_P2, UART0_RX and I2C0_SDA, clamped only to VSS with a 30-60 kΩ pullup when enabled and a ±25 mA single-pin limit. |
| 25 | PTA1 | bidirectional | General-purpose I/O with alternates KBI0_P1, FTM0_CH1, ACMP0_IN1 and ADC0_SE1, with internal clamps to VSS and VDD, a ±25 mA single-pin limit, and a 30-50 kΩ pullup when enabled. |
| 26 | PTA0 | bidirectional | General-purpose I/O with alternates KBI0_P0, FTM0_CH0, ACMP0_IN0 and ADC0_SE0, with internal clamps to VSS and VDD, a ±25 mA single-pin limit, and a 30-50 kΩ pullup when enabled. |
| 27 | PTC7 | bidirectional | General-purpose I/O with alternate UART1_TX, with internal clamps to VSS and VDD, a ±25 mA single-pin limit, and a 30-50 kΩ pullup when enabled. |
| 28 | PTC6 | bidirectional | General-purpose I/O with alternate UART1_RX, with internal clamps to VSS and VDD, a ±25 mA single-pin limit, and a 30-50 kΩ pullup when enabled. |
| 29 | PTC5 | bidirectional | General-purpose I/O with alternates FTM1_CH1 and RTCO, with internal clamps to VSS and VDD, a ±25 mA single-pin limit, and a 30-50 kΩ pullup when enabled. |
| 30 | PTC4 | bidirectional | General-purpose I/O with alternates RTCO, FTM1_CH0, ACMP0_IN2 and SWD_CLK, where SWD_CLK (serial wire debug clock, 0-20 MHz) is the highest-priority function; the pin is clamped to VSS and VDD with a 30-50 kΩ pullup when enabled. |
| 31 | PTA5 | bidirectional | General-purpose I/O with alternates IRQ and FTM0_CLK, where RESET (external reset, low-pulse width at least 1.5 × tcyc) is the highest-priority function; the pin is clamped to VSS and VDD with a 30-50 kΩ pullup when enabled. |
| 32 | PTA4 | bidirectional | General-purpose I/O with alternates ACMP0_OUT and SWD_DIO, where SWD_DIO (serial wire debug data, input setup 10 ns before SWD_CLK rise) is the highest-priority function; the pin is clamped to VSS and VDD with a 30-50 kΩ pullup when enabled. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-32(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 32 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Digital supply voltage | VDD | -0.3 | 6 | V | 7 | ||
| Maximum current into VDD | IDD | 120 | mA | 7 | |||
| Input voltage of true open drain pins | VIN | -0.3 | 6 | V | True open drain pins | 7 | |
| Instantaneous maximum current single pin limit (applies to all port pins) | ID | -25 | 25 | mA | 7 | ||
| Storage temperature | TSTG | -55 | 150 | °C | 6 | ||
| Solder temperature, lead-free | TSDR | 260 | °C | 6 | |||
| Electrostatic discharge voltage, human body model | VHBM | -6000 | 6000 | V | JESD22-A114 HBM | 6 | |
| Electrostatic discharge voltage, charged-device model | VCDM | -500 | 500 | V | JESD22-C101 CDM | 6 | |
| Latch-up current at ambient temperature of 125°C | ILAT | -100 | 100 | mA | Ambient 125 °C, JESD78D | 6 | |
| Operating voltage | 2.7 | 5.5 | V | 7 | |||
| Analog supply voltage | VDDA | 2.7 | 5.5 | V | Absolute | 24 | |
| Ambient temperature | TA | -40 | 105 | °C | 18 | ||
| Die junction temperature | TJ | -40 | 125 | °C | 18 | ||
| Maximum power supply VDD ramp-up rate | 70 | V/ms | Characterized on samples of different lots | 8 | |||
| Supply voltage for program/erase | Vprog/erase | 2.7 | 5.5 | V | -40 °C to 105 °C | 23 | |
| Max total IOH for all ports | IOHT | -100 | mA | 5 V | 8 | ||
| Max total IOH for all ports | IOHT | -60 | mA | 3 V | 8 | ||
| Max total IOL for all ports | IOLT | 100 | mA | 5 V | 8 | ||
| Max total IOL for all ports | IOLT | 60 | mA | 3 V | 8 | ||
| Input leakage current, per pin (pins in high impedance input mode) | /IIn/ | 0.1 | 1 | µA | VIN = VDD or VSS | 8 | |
| Total leakage current combined for all port pins | /IINTOT/ | 2 | µA | Pins in high impedance input mode, VIN = VDD or VSS | 8 | ||
| Pullup resistors, all digital inputs (other than PTA2 and PTA3) | RPU | 30 | 50 | kΩ | When enabled | 8 | |
| Pullup resistors, PTA2 and PTA3 pins | RPU4 | 30 | 60 | kΩ | 8 | ||
| DC injection current, single pin limit | IIC | -2 | 2 | mA | VIN < VSS, VIN > VDD | 8 | |
| DC injection current, total MCU limit (includes sum of all stressed pins) | IIC | -5 | 25 | mA | Total MCU limit | 8 | |
| Input capacitance, all pins | CIn | 7 | pF | 8 | |||
| RAM retention voltage | VRAM | 2 | V | 8 | |||
| POR re-arm voltage | VPOR | 1.5 | 1.75 | 2 | V | 9 | |
| Falling low-voltage detect threshold, high range | VLVDH | 4.2 | 4.3 | 4.4 | V | LVDV = 1 | 9 |
| Falling low-voltage warning threshold, high range, level 1 | VLVW1H | 4.3 | 4.4 | 4.5 | V | LVWV = 00 | 9 |
| Falling low-voltage warning threshold, high range, level 2 | VLVW2H | 4.5 | 4.5 | 4.6 | V | LVWV = 01 | 9 |
| Falling low-voltage warning threshold, high range, level 3 | VLVW3H | 4.6 | 4.6 | 4.7 | V | LVWV = 10 | 9 |
| Falling low-voltage warning threshold, high range, level 4 | VLVW4H | 4.7 | 4.7 | 4.8 | V | LVWV = 11 | 9 |
| Falling low-voltage detect threshold, low range | VLVDL | 2.56 | 2.61 | 2.66 | V | LVDV = 0 | 9 |
| Falling low-voltage warning threshold, low range, level 1 | VLVW1L | 2.62 | 2.7 | 2.78 | V | LVWV = 00 | 9 |
| Falling low-voltage warning threshold, low range, level 2 | VLVW2L | 2.72 | 2.8 | 2.88 | V | LVWV = 01 | 9 |
| Falling low-voltage warning threshold, low range, level 3 | VLVW3L | 2.82 | 2.9 | 2.98 | V | LVWV = 10 | 9 |
| Falling low-voltage warning threshold, low range, level 4 | VLVW4L | 2.92 | 3 | 3.08 | V | LVWV = 11 | 9 |
| Buffered bandgap output | VBG | 1.14 | 1.16 | 1.18 | V | Factory trimmed at VDD = 5.0 V, Temp = 25 °C | 9 |
| Run supply current, FBE mode, all modules clocks enabled, run from RAM | RIDD | 9 | 14.8 | mA | VDD 5 V; 20/20 MHz; -40 to 105 °C | 14 | |
| Run supply current, FBE mode, all modules clocks enabled, run from RAM | RIDD | 8.8 | 11.8 | mA | VDD 3 V; 20/20 MHz; -40 to 105 °C | 14 | |
| Run supply current, FBE mode, all modules clocks disabled, run from RAM | RIDD | 8 | 12.3 | mA | VDD 5 V; 20/20 MHz; -40 to 105 °C | 14 | |
| Run supply current, FBE mode, all modules clocks disabled, run from RAM | RIDD | 7.8 | 9.2 | mA | VDD 3 V; 20/20 MHz; -40 to 105 °C | 14 | |
| Stop mode supply current, no clocks active (except 1 kHz LPO clock) | SIDD | 2 | 85 | µA | VDD 5 V; -40 to 105 °C | 14 | |
| Stop mode supply current, no clocks active (except 1 kHz LPO clock) | SIDD | 1.9 | 80 | µA | VDD 3 V; -40 to 105 °C | 14 | |
| ADC adder to Stop, 32-pin package | 42 | µA | VDD 5 V; ADLPC=1, ADLSMP=1, ADCO=1, MODE=10B, ADICLK=11B | 15 | |||
| ADC adder to Stop, 32-pin package | 41 | µA | VDD 3 V; ADLPC=1, ADLSMP=1, ADCO=1, MODE=10B, ADICLK=11B | 15 | |||
| Supply voltage delta to VDD (VDD-VDDA) | ΔVDDA | -100 | 0 | 100 | mV | 24 | |
| Ground voltage delta to VSS (VSS-VSSA) | ΔVSSA | -100 | 0 | 100 | mV | 24 | |
| ADC conversion clock frequency, high speed | fADCK | 0.4 | 8 | MHz | High speed (ADLPC=0) | 24 | |
| Comparator supply current (operation mode) | IDDA | 10 | 20 | µA | 27 | ||
| Analog input offset voltage | VAIO | 40 | mV | 27 | |||
| ADC supply current | IDDA | 582 | 990 | µA | ADLPC = 0, ADLSMP = 0, ADCO = 1 | 26 | |
| Thermal resistance, junction to ambient, natural convection, single-layer (1S) | RθJA | 86 | °C/W | 32LQFP column; 1S board | 18 | ||
| Thermal resistance, junction to ambient, natural convection, four-layer (2s2p) | RθJA | 57 | °C/W | 32LQFP column; 2s2p board | 18 | ||
| Thermal resistance, junction to ambient, 200 ft./min. air speed, single-layer (1S) | RθJMA | 72 | °C/W | 32LQFP column; 1S board | 19 | ||
| Thermal resistance, junction to ambient, 200 ft./min. air speed, four-layer (2s2p) | RθJMA | 51 | °C/W | 32LQFP column; 2s2p board | 19 | ||
| Thermal resistance, junction to board | RθJB | 33 | °C/W | 32LQFP column | 19 | ||
| Thermal resistance, junction to case | RθJC | 24 | °C/W | 32LQFP column | 19 | ||
| Thermal characterization parameter, junction to package top (natural convection) | ΨJT | 6 | °C/W | 32LQFP column | 19 |
CAD (KiCad official)
- Symbol:
MKE02Z64VLC2 - Footprint:
Package_QFP:LQFP-32_7x7mm_P0.8mm - 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files:
mke02z64vlc2-etched.step/mke02z64vlc2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mke02z64vlc2.step/mke02z64vlc2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (38 pp, sha256
14e292d2911a4648, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).