main
History Download
Ray Publish 0.1.0 fa62d8a

MKE02Z32VLH4

NXP Semicon · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-64(10x10)

MKE02Z32VLH4 from NXP Semicon, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PTD1 bidirectional Port D bit 1 is a high-current output pin with alternate functions KBI1_P1, FTM2_CH3 and SPI1_MOSI.
2 PTD0 bidirectional Port D bit 0 is a high-current output pin with alternate functions KBI1_P0, FTM2_CH2 and SPI1_SCK.
3 PTH7 bidirectional Port H bit 7 is a general-purpose I/O pin with no alternate function listed in Table 19.
4 PTH6 bidirectional Port H bit 6 is a general-purpose I/O pin with no alternate function listed in Table 19.
5 PTE7 bidirectional Port E bit 7 has alternate functions FTM2_CLK and FTM1_CH1.
6 PTH2 bidirectional Port H bit 2 has alternate functions BUSOUT and FTM1_CH0.
7 VDD power_in Digital supply voltage; operating range is 2.7 V to 5.5 V and absolute maximum is -0.3 V to 6.0 V.
8 VDDA/VREFH power_in Analog supply and ADC high reference; VDDA and VREFH are internally connected, with VDDA operating at 2.7 V to 5.5 V.
9 VREFL power_in ADC low reference potential, referenced to VSSA.
10 VSSA/VSS power_in Analog ground; VSSA and VSS are internally connected.
11 PTB7 bidirectional Port B bit 7 has alternate functions I2C0_SCL and EXTAL.
12 PTB6 bidirectional Port B bit 6 has alternate functions I2C0_SDA and XTAL.
13 VSS power_in Digital ground.
14 PTH1 bidirectional Port H bit 1 is a high-current output pin with alternate function FTM2_CH1.
15 PTH0 bidirectional Port H bit 0 is a high-current output pin with alternate function FTM2_CH0.
16 PTE6 bidirectional Port E bit 6 is a general-purpose I/O pin with no alternate function listed in Table 19.
17 PTE5 bidirectional Port E bit 5 is a general-purpose I/O pin with no alternate function listed in Table 19.
18 PTB5 bidirectional Port B bit 5 is a high-current output pin with alternate functions FTM2_CH5, SPI0_PCS0 and ACMP1_OUT.
19 PTB4 bidirectional Port B bit 4 is a high-current output pin with alternate functions FTM2_CH4, SPI0_MISO, NMI and ACMP1_IN2.
20 PTC3 bidirectional Port C bit 3 has alternate functions FTM2_CH3 and ADC0_SE11.
21 PTC2 bidirectional Port C bit 2 has alternate functions FTM2_CH2 and ADC0_SE10.
22 PTD7 bidirectional Port D bit 7 has alternate functions KBI1_P7 and UART2_TX.
23 PTD6 bidirectional Port D bit 6 has alternate functions KBI1_P6 and UART2_RX.
24 PTD5 bidirectional Port D bit 5 has alternate function KBI1_P5.
25 PTC1 bidirectional Port C bit 1 has alternate functions FTM2_CH1 and ADC0_SE9.
26 PTC0 bidirectional Port C bit 0 has alternate functions FTM2_CH0 and ADC0_SE8.
27 PTF7 bidirectional Port F bit 7 has alternate function ADC0_SE15.
28 PTF6 bidirectional Port F bit 6 has alternate function ADC0_SE14.
29 PTF5 bidirectional Port F bit 5 has alternate function ADC0_SE13.
30 PTF4 bidirectional Port F bit 4 has alternate function ADC0_SE12.
31 PTB3 bidirectional Port B bit 3 has alternate functions KBI0_P7, SPI0_MOSI, FTM0_CH1 and ADC0_SE7.
32 PTB2 bidirectional Port B bit 2 has alternate functions KBI0_P6, SPI0_SCK, FTM0_CH0 and ADC0_SE6.
33 PTB1 bidirectional Port B bit 1 has alternate functions KBI0_P5, UART0_TX and ADC0_SE5.
34 PTB0 bidirectional Port B bit 0 has alternate functions KBI0_P4, UART0_RX and ADC0_SE4.
35 PTF3 bidirectional Port F bit 3 is a general-purpose I/O pin with no alternate function listed in Table 19.
36 PTF2 bidirectional Port F bit 2 is a general-purpose I/O pin with no alternate function listed in Table 19.
37 PTA7 bidirectional Port A bit 7 has alternate functions FTM2_FLT2, ACMP1_IN1 and ADC0_SE3.
38 PTA6 bidirectional Port A bit 6 has alternate functions FTM2_FLT1, ACMP1_IN0 and ADC0_SE2.
39 PTE4 bidirectional Port E bit 4 is a general-purpose I/O pin with no alternate function listed in Table 19.
40 VSS power_in Digital ground.
41 VDD power_in Digital supply voltage; operating range is 2.7 V to 5.5 V.
42 PTF1 bidirectional Port F bit 1 is a general-purpose I/O pin with no alternate function listed in Table 19.
43 PTF0 bidirectional Port F bit 0 is a general-purpose I/O pin with no alternate function listed in Table 19.
44 PTD4 bidirectional Port D bit 4 has alternate function KBI1_P4.
45 PTD3 bidirectional Port D bit 3 has alternate functions KBI1_P3 and SPI1_PCS0.
46 PTD2 bidirectional Port D bit 2 has alternate functions KBI1_P2 and SPI1_MISO.
47 PTA3 bidirectional Port A bit 3 is a true open-drain pin when operated as output, internally clamped to VSS, with alternate functions KBI0_P3, UART0_TX and I2C0_SCL.
48 PTA2 bidirectional Port A bit 2 is a true open-drain pin internally clamped to VSS, with alternate functions KBI0_P2, UART0_RX and I2C0_SDA.
49 PTA1 bidirectional Port A bit 1 has alternate functions KBI0_P1, FTM0_CH1, ACMP0_IN1 and ADC0_SE1.
50 PTA0 bidirectional Port A bit 0 has alternate functions KBI0_P0, FTM0_CH0, ACMP0_IN0 and ADC0_SE0.
51 PTC7 bidirectional Port C bit 7 has alternate function UART1_TX.
52 PTC6 bidirectional Port C bit 6 has alternate function UART1_RX.
53 PTE3 bidirectional Port E bit 3 has alternate function SPI0_PCS0.
54 PTE2 bidirectional Port E bit 2 has alternate function SPI0_MISO.
55 PTG3 bidirectional Port G bit 3 is a general-purpose I/O pin with no alternate function listed in Table 19.
56 PTG2 bidirectional Port G bit 2 is a general-purpose I/O pin with no alternate function listed in Table 19.
57 PTG1 bidirectional Port G bit 1 is a general-purpose I/O pin with no alternate function listed in Table 19.
58 PTG0 bidirectional Port G bit 0 is a general-purpose I/O pin with no alternate function listed in Table 19.
59 PTE1 bidirectional Port E bit 1 is a high-current output pin with alternate function SPI0_MOSI.
60 PTE0 bidirectional Port E bit 0 is a high-current output pin with alternate functions SPI0_SCK and FTM1_CLK.
61 PTC5 bidirectional Port C bit 5 has alternate functions FTM1_CH1 and RTCO.
62 PTC4 bidirectional Port C bit 4 has alternate functions RTCO, FTM1_CH0, ACMP0_IN2 and SWD_CLK.
63 PTA5 bidirectional Port A bit 5 has alternate functions IRQ, FTM0_CLK and RESET.
64 PTA4 bidirectional Port A bit 4 has alternate functions ACMP0_OUT and SWD_DIO.

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package LQFP-64(10x10)
Category Embedded Processors & Controllers
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Digital supply voltage VDD -0.3 6 V 7
Maximum current into VDD IDD 120 mA 7
Input voltage except true open drain pins VIN -0.3 V 7
Input voltage of true open drain pins VIN -0.3 6 V 7
Instantaneous maximum current single pin limit ID -25 25 mA applies to all port pins 7
Storage temperature TSTG -55 150 °C 6
Solder temperature, lead-free TSDR 260 °C 6
Electrostatic discharge voltage, human body model VHBM -6000 6000 V 6
Electrostatic discharge voltage, charged-device model VCDM -500 500 V 6
Latch-up current ILAT -100 100 mA ambient temperature of 125°C 6
Operating voltage VDD 2.7 5.5 V 7
Die junction temperature TJ -40 125 °C 18
Ambient temperature TA -40 105 °C 18
Thermal resistance, junction to ambient, single-layer (1S), natural convection RθJA 71 °C/W 64 LQFP column 19
Thermal resistance, junction to ambient, four-layer (2s2p), natural convection RθJA 53 °C/W 64 LQFP column 19
Thermal resistance, junction to ambient, single-layer (1S), 200 ft./min. air speed RθJMA 59 °C/W 64 LQFP column 19
Thermal resistance, junction to ambient, four-layer (2s2p), 200 ft./min. air speed RθJMA 46 °C/W 64 LQFP column 19
Thermal resistance, junction to board RθJB 35 °C/W 64 LQFP column 19
Thermal resistance, junction to case RθJC 20 °C/W 64 LQFP column 19
Thermal characterization parameter, junction to package top ΨJT 5 °C/W 64 LQFP column, natural convection 19
Max total IOH for all ports IOHT -100 mA 5 V 8
Max total IOH for all ports IOHT -60 mA 3 V 8
Output low voltage, all I/O pins, standard-drive strength VOL 0.8 V 5 V, Iload = 5 mA 8
Output low voltage, high current drive pins, high-drive strength VOL 0.8 V 5 V, Iload = 20 mA 8
Max total IOL for all ports IOLT 100 mA 5 V 8
Max total IOL for all ports IOLT 60 mA 3 V 8
Input leakage current, per pin /IIn/ 0.1 1 µA Pins in high impedance input mode, VIN = VDD or VSS 8
Total leakage combined for all port pins /IINTOT/ 2 µA Pins in high impedance input mode, VIN = VDD or VSS 8
Pullup resistors, all digital inputs RPU 30 50 kΩ when enabled; all I/O pins other than PTA2 and PTA3 8
Pullup resistors, PTA2 and PTA3 pins RPU4 30 60 kΩ 8
DC injection current, single pin limit IIC -2 2 mA VIN < VSS, VIN > VDD 8
DC injection current, total MCU limit, includes sum of all stressed pins IIC -5 25 mA 8
Input capacitance, all pins CIn 7 pF 8
RAM retention voltage VRAM 2 V 8
POR re-arm voltage VPOR 1.5 1.75 2 V 9
Falling low-voltage detect threshold, high range VLVDH 4.2 4.3 4.4 V LVDV = 1 9
Falling low-voltage warning threshold, high range VLVW1H 4.3 4.4 4.5 V Level 1 falling (LVWV = 00) 9
Falling low-voltage warning threshold, high range VLVW2H 4.5 4.5 4.6 V Level 2 falling (LVWV = 01) 9
Falling low-voltage warning threshold, high range VLVW3H 4.6 4.6 4.7 V Level 3 falling (LVWV = 10) 9
Falling low-voltage warning threshold, high range VLVW4H 4.7 4.7 4.8 V Level 4 falling (LVWV = 11) 9
High range low-voltage detect/warning hysteresis VHYSH 100 mV 9
Falling low-voltage detect threshold, low range VLVDL 2.56 2.61 2.66 V LVDV = 0 9
Falling low-voltage warning threshold, low range VLVW1L 2.62 2.7 2.78 V Level 1 falling (LVWV = 00) 9
Falling low-voltage warning threshold, low range VLVW2L 2.72 2.8 2.88 V Level 2 falling (LVWV = 01) 9
Falling low-voltage warning threshold, low range VLVW3L 2.82 2.9 2.98 V Level 3 falling (LVWV = 10) 9
Falling low-voltage warning threshold, low range VLVW4L 2.92 3 3.08 V Level 4 falling (LVWV = 11) 9
Low range low-voltage detect hysteresis VHYSDL 40 mV 9
Low range low-voltage warning hysteresis VHYSWL 80 mV 9
Buffered bandgap output VBG 1.14 1.16 1.18 V factory trimmed at VDD = 5.0 V, Temp = 25 °C 9
Stop mode supply current, no clocks active (except 1 kHz LPO clock) SIDD 2 85 µA VDD = 5 V, -40 to 105 °C 15
Stop mode supply current, no clocks active (except 1 kHz LPO clock) SIDD 1.9 80 µA VDD = 3 V, -40 to 105 °C 15
Supply voltage, analog VDDA 2.7 5.5 V 25
ADC conversion clock frequency, high speed fADCK 0.4 8 MHz ADLPC = 0 25
ADC conversion clock frequency, low power fADCK 0.4 4 MHz ADLPC = 1 25
System and core clock frequency fSys 40 MHz 16
Bus frequency fBus 20 MHz 16
Internal low power oscillator frequency fLPO 0.67 1 1.25 KHz 16
Analog comparator supply current, operation mode IDDA 10 20 µA 28

CAD (KiCad official)

  • Symbol: MKE02Z32VLH4
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: mke02z32vlh4-etched.step / mke02z32vlh4-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mke02z32vlh4.step / mke02z32vlh4.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (37 pp, sha256 dd3ab7b95cbae8e4, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF