main
Ray
Publish 0.1.0
9e10365
MJD47T4
STMicroelectronics · Bipolar (BJT) · DPAK
MJD47T4 from STMicroelectronics, in a DPAK. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | B | passive | Base terminal; the datasheet limits base current to 0.6 A continuous and 1.2 A peak (tp < 5 ms). |
| 2 | C | passive | Collector terminal, also electrically connected to the TAB; the datasheet limits collector current to 1 A continuous and 2 A peak (tp < 5 ms), with VCEO of 250 V. |
| 3 | E | passive | Emitter terminal; the datasheet gives VEBO of 5 V maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | DPAK |
| Category | Transistors/Thyristors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Collector-base voltage (IE = 0 V) | VCBO | 350 | V | IE = 0 V | 2 | ||
| Collector-emitter voltage (IB = 0 A) | VCEO | 250 | V | IB = 0 A | 2 | ||
| Collector-base voltage (IC = 0 A) | VEBO | 5 | V | IC = 0 A | 2 | ||
| Collector current | IC | 1 | A | 2 | |||
| Collector peak current | ICM | 2 | A | tp< 5 ms | 2 | ||
| Base current | IB | 0.6 | A | 2 | |||
| Base peak current | IBM | 1.2 | A | tp< 5 ms | 2 | ||
| Total power dissipation | PTOT | 15 | W | TC = 25 °C | 2 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 2 | ||
| Maximum operating junction temperature | TJ | 150 | °C | 2 | |||
| Thermal resistance, junction-to-case | RthJC | 8.33 | °C/W | 2 | |||
| Thermal resistance, junction-to-ambient | RthJA | 100 | °C/W | 2 | |||
| Collector cut-off current | ICES | 0.1 | mA | VCE = 350 V, VBE = 0 V | 3 | ||
| Emitter cut-off current | IEBO | 1 | mA | VEB = 5 V, IC = 0 A | 3 | ||
| Collector-emitter sustaining voltage | VCEO(sus) | 250 | V | IC = 30 mA, IB = 0 A | 3 | ||
| Collector-emitter saturation voltage | VCE(sat) | 1 | V | IC = 1 A, IB = 0.2 A | 3 | ||
| Base-emitter on-voltage | VBE(on) | 1.5 | V | IC = 1 A, VCE = 10 V | 3 | ||
| DC current gain | hFE | 30 | 150 | IC = 0.3 A, VCE = 10 V | 3 | ||
| DC current gain | hFE | 10 | IC = 1 A, VCE = 10 V | 3 | |||
| Transition frequency | fT | 10 | MHz | IC = 0.2 A, VCE = 10 V, f = 2 MHz | 3 | ||
| Small signal current gain | hfe | 25 | IC = 0.2 A, VCE = 10 V, f = 1 kHz | 3 |
CAD (KiCad official)
- Symbol:
MJD47T4 - Footprint:
Package_TO_SOT_SMD:TO-252-2 - 3D model: DPAK (KiCad packages3D, STEP)
- 3D model files:
mjd47t4-etched.step/mjd47t4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mjd47t4.step/mjd47t4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (12 pp, sha256
ef203a4fe7a67fb2, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MJD47T4
**STMicroelectronics** · Bipolar (BJT) · DPAK
MJD47T4 from STMicroelectronics, in a DPAK. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | B | passive | Base terminal; the datasheet limits base current to 0.6 A continuous and 1.2 A peak (tp < 5 ms). |
| 2 | C | passive | Collector terminal, also electrically connected to the TAB; the datasheet limits collector current to 1 A continuous and 2 A peak (tp < 5 ms), with VCEO of 250 V. |
| 3 | E | passive | Emitter terminal; the datasheet gives VEBO of 5 V maximum. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | DPAK |
| Category | Transistors/Thyristors |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Collector-base voltage (IE = 0 V) | VCBO | | | 350 | V | IE = 0 V | 2 |
| Collector-emitter voltage (IB = 0 A) | VCEO | | | 250 | V | IB = 0 A | 2 |
| Collector-base voltage (IC = 0 A) | VEBO | | | 5 | V | IC = 0 A | 2 |
| Collector current | IC | | | 1 | A | | 2 |
| Collector peak current | ICM | | | 2 | A | tp< 5 ms | 2 |
| Base current | IB | | | 0.6 | A | | 2 |
| Base peak current | IBM | | | 1.2 | A | tp< 5 ms | 2 |
| Total power dissipation | PTOT | | | 15 | W | TC = 25 °C | 2 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 2 |
| Maximum operating junction temperature | TJ | | | 150 | °C | | 2 |
| Thermal resistance, junction-to-case | RthJC | | | 8.33 | °C/W | | 2 |
| Thermal resistance, junction-to-ambient | RthJA | | | 100 | °C/W | | 2 |
| Collector cut-off current | ICES | | | 0.1 | mA | VCE = 350 V, VBE = 0 V | 3 |
| Emitter cut-off current | IEBO | | | 1 | mA | VEB = 5 V, IC = 0 A | 3 |
| Collector-emitter sustaining voltage | VCEO(sus) | 250 | | | V | IC = 30 mA, IB = 0 A | 3 |
| Collector-emitter saturation voltage | VCE(sat) | | | 1 | V | IC = 1 A, IB = 0.2 A | 3 |
| Base-emitter on-voltage | VBE(on) | | | 1.5 | V | IC = 1 A, VCE = 10 V | 3 |
| DC current gain | hFE | 30 | | 150 | | IC = 0.3 A, VCE = 10 V | 3 |
| DC current gain | hFE | 10 | | | | IC = 1 A, VCE = 10 V | 3 |
| Transition frequency | fT | 10 | | | MHz | IC = 0.2 A, VCE = 10 V, f = 2 MHz | 3 |
| Small signal current gain | hfe | 25 | | | | IC = 0.2 A, VCE = 10 V, f = 1 kHz | 3 |
## CAD (KiCad official)
- Symbol: `MJD47T4`
- Footprint: `Package_TO_SOT_SMD:TO-252-2`
- 3D model: DPAK (KiCad packages3D, STEP)
- 3D model files: `mjd47t4-etched.step` / `mjd47t4-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mjd47t4.step` / `mjd47t4.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/mjd47t4.pdf) (12 pp, sha256 `ef203a4fe7a67fb2`, retrieved 2026-11-10, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mjd47t4-datasheet.pdf)