main
History Download
Ray Publish 0.1.0 2e2fdf2

MICRF220AYQS

Microchip Tech · RF Transceiver ICs · QSOP-16-150mil

MICRF220AYQS from Microchip Tech, in a QSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO1 passive Reference resonator connection to the Pierce oscillator, may also be driven by an external reference of 200mVp-p to 1.5Vp-p maximum, with 7pF internal capacitance to GND in normal operation.
2 GNDRF power_in Ground connection for the ANT RF input, connect to PCB ground plane.
3 ANT input Antenna RF signal input, internally AC coupled; a matching network with an inductor to RF ground is recommended to improve ESD protection.
4 GNDRF power_in Ground connection for the ANT RF input, connect to PCB ground plane.
5 VDD power_in Positive supply connection for all chip functions (3.0V to 3.6V), bypass with a 0.1uF capacitor as close to the pin as possible.
6 SQ input Squelch control logic-level input with 5uA typical internal pull-up; a logic LOW squelches random activity on DO when there is no RF input signal.
7 SEL0 input Demodulator filter bandwidth select logic-level input with 3uA typical internal pull-up, used together with SEL1.
8 SHDN input Shutdown control logic-level input with 5uA typical internal pull-up; LOW enables the device, HIGH places it in low-power shutdown.
9 GND power_in Ground connection for all chip functions except RF input, connect to PCB ground plane.
10 DO output Demodulated data output, current-limited CMOS output in normal operation with a 25kOhm pull-down in shutdown.
11 SEL1 input Demodulator filter bandwidth select logic-level input with 3uA typical internal pull-up, used together with SEL0.
12 CTH passive Demodulation threshold voltage integration capacitor pin; connect a 0.1uF capacitor to GND for a stable slicing threshold.
13 CAGC passive AGC filter capacitor pin; connect a capacitor to GND, value per the AGC Loop and CAGC section (0.47uF to 4.7uF).
14 RSSI output Received signal strength indicator output, an inverted amplified version of the CAGC voltage with 250 Ohm typical output impedance.
15 NC unconnected No connect, leave this pin floating.
16 RO2 passive Reference resonator connection to the Pierce oscillator, with 7pF internal capacitance to GND during normal operation.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QSOP-16-150mil
Category RF & Radio
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (operating) VDD 3 3.6 V Operating Ratings 3
Ambient Temperature (operating) TA -40 105 °C Operating Ratings 3
Maximum Input RF Power (operating) 0 dBm Operating Ratings 3
Frequency Range 300 450 MHz Operating Ratings 3
Supply Voltage (absolute max) VDD 5 V 3
Junction Temperature TJ 150 °C 3
Lead Temperature 300 °C soldering, 10sec 3
Storage Temperature -65 150 °C 3
Maximum Receiver Input Power 10 dBm 3
ESD Rating HBM 3 kV HBM 3
Reference Oscillator Input Range 0.2 1.5 VP-P External input, AC couple to RO1 3
Output Rise Time 600 ns 15pF load on DO pin, 0.1xVDD to 0.9xVDD 4
Output Fall Time 200 ns 15pF load on DO pin, 0.1xVDD to 0.9xVDD 4
Input High Voltage 0.8 V SHDN, SEL0, SEL1, SQ; printed 0.8VDD 4
Input Low Voltage 0.2 V SHDN, SEL0, SEL1, SQ; printed 0.2VDD 4
Output Voltage High 0.8 V DO; printed 0.8VDD 4
Output Voltage Low 0.2 V DO; printed 0.2VDD 4
CTH Leakage Current in CTH Hold Mode 10 nA TA = +105ºC (1 at TA = +25ºC) 4
DO Pin Output Current (source) 300 µA As output source @ 0.8 VDD 4
DO Pin Output Current (sink) 680 µA As output sink @ 0.2 VDD 4
Operating Supply Current 315MHz 4.3 mA Continuous Operation, fRF = 315MHz 3
Operating Supply Current 433.92MHz 6 mA Continuous Operation, fRF = 433.92MHz 3
Shutdown Current 0.1 µA VSHDN = VDD 3
Sensitivity 433.92MHz 1% BER -112.5 dBm 433.92MHz, VSEL1 = VSEL0 = 0V, BER = 1% 3
Sensitivity 433.92MHz 0.1% BER -110 dBm 433.92MHz, VSEL1 = VSEL0 = 0V, BER = 0.1% 3
Image Rejection 25 dB fIMAGE = fRF, 2fIF 3
Reference Oscillator Frequency 433.92MHz 13.5231 MHz fRF = 433.92 MHz 3
Reference Oscillator Frequency 315MHz 9.81713 MHz fRF = 315 MHz 3
RSSI Output Current 400 µA 5kΩ load to GND, −50dBm RF input level 4
RSSI Output Impedance 250 Ω 4
RSSI Response Time 10 ms VSEL0 = VSEL1 = 0V, RF input stepped from no input to −50dBm 4

CAD (KiCad official)

  • Symbol: MICRF220AYQS
  • Footprint: Package_SO:QSOP-16_3.9x4.9mm_P0.635mm
  • 3D model: QSOP-16-150mil (KiCad packages3D, STEP)
  • 3D model files: micrf220ayqs-etched.step / micrf220ayqs-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); micrf220ayqs.step / micrf220ayqs.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (20 pp, sha256 399ab8049bd8e4c3, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF