component
MIC94090YC6-TR
Public Made by Adomby adom
Microchip Tech Power Distribution Switches, SC-70-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
MIC94090YC6-TR
Microchip Tech · Power Distribution Switches · SC-70-6
MIC94090YC6-TR from Microchip Tech, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Drain of the P-Channel MOSFET, which is the switched output of the load switch. |
| 2 | GND | power_in | Ground: connect to electrical ground. |
| 3 | NC | unconnected | No internal connection; a signal or voltage applied to this pin will have no effect on device operation. |
| 4 | VIN | power_in | Source of the P-Channel MOSFET; operating input voltage range is 1.7V to 5.5V. |
| 5 | GND | power_in | Ground: connect to electrical ground (second ground pin, same function as pin 2). |
| 6 | EN | input | Active-high CMOS-compatible enable input for the switch, with an internal 2MΩ pull-down to GND so the output is off if the pin is left floating. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SC-70-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Enable Threshold Voltage | VEN_TH | 0.4 | 1.25 | V | VIN = 1.7V to 4.5V, ID = -250μA | 3 | |
| Quiescent Current (MIC94090/1) | IQ | 0.1 | 1 | µA | VIN = VEN = 5.5V, ID = OPEN, measured on VIN pin | 3 | |
| Enable Input Current | IEN | 2.5 | 4 | µA | VIN = VEN = 5.5V, ID = OPEN | 3 | |
| Shutdown Current | ISD | 0.01 | 1 | µA | VIN = +5.5V, VEN = 0V, ID = OPEN, measured on the VIN pin | 3 | |
| OFF State Leakage Current | ISHUT-SWITCH | 0.01 | 1 | µA | VIN = +5.5V, VEN = 0V, ID = SHORT, measured on VOUT | 3 | |
| P-Channel Drain to Source ON Resistance | RDS(ON) | 130 | 225 | mΩ | VIN = +5.0V, ID = -100mA, VEN = 1.5V | 3 | |
| P-Channel Drain to Source ON Resistance | RDS(ON) | 135 | 235 | mΩ | VIN = +4.5V, ID = -100mA, VEN = 1.5V | 3 | |
| P-Channel Drain to Source ON Resistance | RDS(ON) | 140 | 255 | mΩ | VIN = +3.6V, ID = -100mA, VEN = 1.5V | 3 | |
| P-Channel Drain to Source ON Resistance | RDS(ON) | 170 | 315 | mΩ | VIN = +2.5V, ID = -100mA, VEN = 1.5V | 3 | |
| P-Channel Drain to Source ON Resistance | RDS(ON) | 235 | 355 | mΩ | VIN = +1.8V, ID = -100mA, VEN = 1.5V | 3 | |
| P-Channel Drain to Source ON Resistance | RDS(ON) | 260 | 375 | mΩ | VIN = +1.7V, ID = -100mA, VEN = 1.5V | 3 | |
| Turn-On Delay Time (MIC94090/1) | tON_DLY | 0.4 | 1.5 | µs | VIN = +3.6V, ID = -100mA, VEN = 1.5V | 4 | |
| Turn-On Rise Time (MIC94090/1) | tON_RISE | 0.4 | 1.5 | µs | VIN = +3.6V, ID = -100mA, VEN = 1.5V | 4 | |
| Turn-Off Delay Time | tOFF_DLY | 60 | 200 | ns | VIN = +3.6V, ID = -100mA, VEN = 1.5V | 4 | |
| Turn-Off Fall Time | tOFF_FALL | 10 | 100 | ns | VIN = +3.6V, ID = -100mA, VEN = 1.5V | 4 | |
| Input Voltage (VIN) | VIN | 6 | V | 3 | |||
| Enable Voltage (VEN) | VEN | 6 | V | 3 | |||
| Continuous Drain Current (ID) | ID | -1.2 | 1.2 | A | TA = 25°C (SC-70) | 3 | |
| Pulsed Drain Current (IDP) | IDP | -6 | 6 | A | Pulse width <300μs with <2% duty cycle | 3 | |
| Continuous Diode Current (IS) | IS | -50 | mA | Continuous body diode reverse conduction (VOUT to VIN) not recommended | 3 | ||
| Storage Temperature (Ts) | Ts | -55 | 150 | °C | 3 | ||
| ESD Rating HBM | 3 | kV | HBM, 1.5kΩ in series with 100pF | 3 | |||
| Input Voltage (VIN) operating range | VIN | 1.7 | 5.5 | V | 3 | ||
| Junction Temperature (TJ) | TJ | -40 | 125 | °C | 3 | ||
| Package Thermal Resistance SC-70-6 (θJC) | θJC | 100 | °C/W | SC-70-6 | 3 |
CAD (KiCad official)
- Symbol:
MIC94090YC6-TR - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SC-70-6 (KiCad packages3D, STEP)
- 3D model files:
mic94090yc6-tr-etched.step/mic94090yc6-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic94090yc6-tr.step/mic94090yc6-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (16 pp, sha256
02c17db7702854f3, retrieved 2026-10-20, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MIC94090YC6-TR
**Microchip Tech** · Power Distribution Switches · SC-70-6
MIC94090YC6-TR from Microchip Tech, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Drain of the P-Channel MOSFET, which is the switched output of the load switch. |
| 2 | GND | power_in | Ground: connect to electrical ground. |
| 3 | NC | unconnected | No internal connection; a signal or voltage applied to this pin will have no effect on device operation. |
| 4 | VIN | power_in | Source of the P-Channel MOSFET; operating input voltage range is 1.7V to 5.5V. |
| 5 | GND | power_in | Ground: connect to electrical ground (second ground pin, same function as pin 2). |
| 6 | EN | input | Active-high CMOS-compatible enable input for the switch, with an internal 2MΩ pull-down to GND so the output is off if the pin is left floating. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SC-70-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Enable Threshold Voltage | VEN_TH | 0.4 | | 1.25 | V | VIN = 1.7V to 4.5V, ID = -250μA | 3 |
| Quiescent Current (MIC94090/1) | IQ | | 0.1 | 1 | µA | VIN = VEN = 5.5V, ID = OPEN, measured on VIN pin | 3 |
| Enable Input Current | IEN | | 2.5 | 4 | µA | VIN = VEN = 5.5V, ID = OPEN | 3 |
| Shutdown Current | ISD | | 0.01 | 1 | µA | VIN = +5.5V, VEN = 0V, ID = OPEN, measured on the VIN pin | 3 |
| OFF State Leakage Current | ISHUT-SWITCH | | 0.01 | 1 | µA | VIN = +5.5V, VEN = 0V, ID = SHORT, measured on VOUT | 3 |
| P-Channel Drain to Source ON Resistance | RDS(ON) | | 130 | 225 | mΩ | VIN = +5.0V, ID = -100mA, VEN = 1.5V | 3 |
| P-Channel Drain to Source ON Resistance | RDS(ON) | | 135 | 235 | mΩ | VIN = +4.5V, ID = -100mA, VEN = 1.5V | 3 |
| P-Channel Drain to Source ON Resistance | RDS(ON) | | 140 | 255 | mΩ | VIN = +3.6V, ID = -100mA, VEN = 1.5V | 3 |
| P-Channel Drain to Source ON Resistance | RDS(ON) | | 170 | 315 | mΩ | VIN = +2.5V, ID = -100mA, VEN = 1.5V | 3 |
| P-Channel Drain to Source ON Resistance | RDS(ON) | | 235 | 355 | mΩ | VIN = +1.8V, ID = -100mA, VEN = 1.5V | 3 |
| P-Channel Drain to Source ON Resistance | RDS(ON) | | 260 | 375 | mΩ | VIN = +1.7V, ID = -100mA, VEN = 1.5V | 3 |
| Turn-On Delay Time (MIC94090/1) | tON_DLY | | 0.4 | 1.5 | µs | VIN = +3.6V, ID = -100mA, VEN = 1.5V | 4 |
| Turn-On Rise Time (MIC94090/1) | tON_RISE | | 0.4 | 1.5 | µs | VIN = +3.6V, ID = -100mA, VEN = 1.5V | 4 |
| Turn-Off Delay Time | tOFF_DLY | | 60 | 200 | ns | VIN = +3.6V, ID = -100mA, VEN = 1.5V | 4 |
| Turn-Off Fall Time | tOFF_FALL | | 10 | 100 | ns | VIN = +3.6V, ID = -100mA, VEN = 1.5V | 4 |
| Input Voltage (VIN) | VIN | | | 6 | V | | 3 |
| Enable Voltage (VEN) | VEN | | | 6 | V | | 3 |
| Continuous Drain Current (ID) | ID | -1.2 | | 1.2 | A | TA = 25°C (SC-70) | 3 |
| Pulsed Drain Current (IDP) | IDP | -6 | | 6 | A | Pulse width <300μs with <2% duty cycle | 3 |
| Continuous Diode Current (IS) | IS | -50 | | | mA | Continuous body diode reverse conduction (VOUT to VIN) not recommended | 3 |
| Storage Temperature (Ts) | Ts | -55 | | 150 | °C | | 3 |
| ESD Rating HBM | | | | 3 | kV | HBM, 1.5kΩ in series with 100pF | 3 |
| Input Voltage (VIN) operating range | VIN | 1.7 | | 5.5 | V | | 3 |
| Junction Temperature (TJ) | TJ | -40 | | 125 | °C | | 3 |
| Package Thermal Resistance SC-70-6 (θJC) | θJC | | | 100 | °C/W | SC-70-6 | 3 |
## CAD (KiCad official)
- Symbol: `MIC94090YC6-TR`
- Footprint: `Package_TO_SOT_SMD:SOT-363_SC-70-6`
- 3D model: SC-70-6 (KiCad packages3D, STEP)
- 3D model files: `mic94090yc6-tr-etched.step` / `mic94090yc6-tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mic94090yc6-tr.step` / `mic94090yc6-tr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588894407008899072) (16 pp, sha256 `02c17db7702854f3`, retrieved 2026-10-20, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mic94090yc6-tr-datasheet.pdf)