main
Ray
Publish 0.1.0
cb9ffd2
MIC8115TUY-TR
Microchip Tech · Monitors & Reset Circuits · SOT-143-4
MIC8115TUY-TR from Microchip Tech, in a SOT-143-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | IC ground pin, the reference for the supervisor circuit. |
| 2 | /RESET | output | Active-low reset output that goes low when VCC falls below the reset threshold voltage or /MR is asserted, and remains asserted for one reset timeout period of 1100 ms minimum after VCC exceeds the threshold and /MR is de-asserted. |
| 3 | /MR | input | Manual reset input where a logic-low forces a reset held for at least 1100 ms after /MR goes high; it can be driven from CMOS or TTL logic or a switch to ground, is pulled high internally through 20 kΩ, and should float if unused. |
| 4 | VCC | power_in | Power supply input with an operating voltage range of 1 V to 5.5 V over -40°C to +85°C. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-143-4 |
| Category | Power Supply Chip |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VCC | 1 | 5.5 | V | TA = -40°C to +85°C | 3 | |
| Supply Current | ICC | 5 | 15 | µA | 3 | ||
| Reset Voltage Threshold | VTH | 3 | 3.08 | 3.15 | V | 3 | |
| Reset Timeout Period | tRST | 1100 | 1700 | 2500 | ms | 3 | |
| /RESET Output Voltage (low) | VOL | 0.3 | V | VCC = VTH(MIN), ISINK = 1.2 mA | 3 | ||
| /MR Minimum Pulse Width | 10 | µs | 3 | ||||
| /MR to Reset Delay | 0.5 | µs | 3 | ||||
| /MR Pull-Up Resistance | 10 | 20 | 30 | kΩ | 3 | ||
| /MR Glitch Immunity | 100 | ns | 3 | ||||
| Operating Temperature Range | -40 | 85 | °C | 4 | |||
| Storage Temperature Range | TS | -65 | 150 | °C | 4 | ||
| Lead Temperature | 300 | °C | Soldering, 10s | 4 | |||
| Terminal Voltage (VCC) | VCC | -0.3 | 6 | V | 3 | ||
| Terminal Voltage (/MR) | /MR | -0.3 | V | 3 | |||
| Input Current (VCC, /MR) | 20 | mA | 3 | ||||
| Output Current (/RESET) | 20 | mA | 3 | ||||
| Rate of Rise (VCC) | 100 | V/µs | 3 | ||||
| ESD Rating | 3 | kV | Human body model, 1.5 kΩ in series with 100 pF | 3 |
CAD (KiCad official)
- Symbol:
MIC8115TUY-TR - Footprint:
Package_TO_SOT_SMD:SOT-143 - 3D model: SOT-143-4 (KiCad packages3D, STEP)
- 3D model files:
mic8115tuy-tr-etched.step/mic8115tuy-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic8115tuy-tr.step/mic8115tuy-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (14 pp, sha256
f60a1348b2e3d88d, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MIC8115TUY-TR
**Microchip Tech** · Monitors & Reset Circuits · SOT-143-4
MIC8115TUY-TR from Microchip Tech, in a SOT-143-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | IC ground pin, the reference for the supervisor circuit. |
| 2 | /RESET | output | Active-low reset output that goes low when VCC falls below the reset threshold voltage or /MR is asserted, and remains asserted for one reset timeout period of 1100 ms minimum after VCC exceeds the threshold and /MR is de-asserted. |
| 3 | /MR | input | Manual reset input where a logic-low forces a reset held for at least 1100 ms after /MR goes high; it can be driven from CMOS or TTL logic or a switch to ground, is pulled high internally through 20 kΩ, and should float if unused. |
| 4 | VCC | power_in | Power supply input with an operating voltage range of 1 V to 5.5 V over -40°C to +85°C. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-143-4 |
| Category | Power Supply Chip |
| Pins | 4 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VCC | 1 | | 5.5 | V | TA = -40°C to +85°C | 3 |
| Supply Current | ICC | | 5 | 15 | µA | | 3 |
| Reset Voltage Threshold | VTH | 3 | 3.08 | 3.15 | V | | 3 |
| Reset Timeout Period | tRST | 1100 | 1700 | 2500 | ms | | 3 |
| /RESET Output Voltage (low) | VOL | | | 0.3 | V | VCC = VTH(MIN), ISINK = 1.2 mA | 3 |
| /MR Minimum Pulse Width | | 10 | | | µs | | 3 |
| /MR to Reset Delay | | | 0.5 | | µs | | 3 |
| /MR Pull-Up Resistance | | 10 | 20 | 30 | kΩ | | 3 |
| /MR Glitch Immunity | | | 100 | | ns | | 3 |
| Operating Temperature Range | | -40 | | 85 | °C | | 4 |
| Storage Temperature Range | TS | -65 | | 150 | °C | | 4 |
| Lead Temperature | | | | 300 | °C | Soldering, 10s | 4 |
| Terminal Voltage (VCC) | VCC | -0.3 | | 6 | V | | 3 |
| Terminal Voltage (/MR) | /MR | -0.3 | | | V | | 3 |
| Input Current (VCC, /MR) | | | | 20 | mA | | 3 |
| Output Current (/RESET) | | | | 20 | mA | | 3 |
| Rate of Rise (VCC) | | | | 100 | V/µs | | 3 |
| ESD Rating | | | | 3 | kV | Human body model, 1.5 kΩ in series with 100 pF | 3 |
## CAD (KiCad official)
- Symbol: `MIC8115TUY-TR`
- Footprint: `Package_TO_SOT_SMD:SOT-143`
- 3D model: SOT-143-4 (KiCad packages3D, STEP)
- 3D model files: `mic8115tuy-tr-etched.step` / `mic8115tuy-tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mic8115tuy-tr.step` / `mic8115tuy-tr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mic8115tuy-tr-datasheet.pdf) (14 pp, sha256 `f60a1348b2e3d88d`, retrieved 2026-10-29, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mic8115tuy-tr-datasheet.pdf)