Generated by kicad-footprint-generator · KiCad file format 20260206
MIC803-30D2VM3-TR
Microchip Tech · Monitors & Reset Circuits · SOT-23-3
MIC803-30D2VM3-TR from Microchip Tech, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground. |
| 2 | /RESET | output | Open-drain active-low reset output that goes low if VCC falls below the reset threshold (VTH) and stays asserted for one timeout period after VCC exceeds VTH; requires a pull-up resistor to a voltage of at most 5.5V. |
| 3 | VCC | power_in | Power supply input and monitored voltage, operating range 1.0V to 5.5V (absolute maximum 6.0V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-3 |
| Category | Power Management |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reset Threshold (MIC803-30, -40 to +85C) | VTH | 2.93 | 3 | 3.08 | V | MIC803-30, TJ = -40˚C to +85˚C | 4 |
| Reset Threshold (MIC803-30, -40 to +125C) | VTH | 2.9 | 3.11 | V | MIC803-30, TJ = -40˚C to +125˚C | 4 | |
| Reset Timeout Period (D2, -40 to +85C) | tRESET | 20 | 35 | 44 | ms | D2, TJ = -40˚C to +85˚C | 4 |
| Reset Timeout Period (D2, -40 to +125C) | tRESET | 16 | 48 | ms | D2, TJ = -40˚C to +125˚C | 4 | |
| Operating Voltage Range (-40 to +85C) | VCC | 1 | 5.5 | V | TJ = -40˚C to +85˚C | 3 | |
| Operating Voltage Range (-40 to +125C) | VCC | 1.2 | 5.5 | V | TJ = -40˚C to +125˚C | 3 | |
| Supply Current (5.5V, -40 to +85C) | ICC | 5.5 | 15 | µA | TJ = -40˚C to +85˚C, VCC = 5.5V, No Load | 3 | |
| Supply Current (3.6V, -40 to +85C) | ICC | 4.5 | 10 | µA | TJ = -40˚C to +85˚C, VCC = 3.6V, No Load | 3 | |
| Supply Current (5.5V, +85 to +125C) | ICC | 18 | µA | TJ = +85˚C to +125˚C, VCC = 5.5V, No Load | 3 | ||
| Supply Current (3.6V, +85 to +125C) | ICC | 13 | µA | TJ = +85˚C to +125˚C, VCC = 3.6V, No Load | 3 | ||
| /RESET Output Voltage low | VOL | 0.4 | V | VCC ≥ 4.0V, ISINK = 3.2 mA | 4 | ||
| /RESET Output Voltage low | VOL | 0.3 | V | VCC ≥ 2.5V, ISINK = 1.2 mA | 4 | ||
| /RESET Output Leakage | 1 | µA | VCC > VTH, /RESET deasserted | 4 | |||
| VCC to /RESET Delay | tD | 15 | µs | VCC = VTH to (VTH, 100 mV) | 4 | ||
| Supply Voltage (absolute max) | VCC | -0.3 | 6 | V | 3 | ||
| Reset Output (/RESET) (absolute max) | /RESET | -0.3 | 6 | V | 3 | ||
| Input Current (VCC) | 20 | mA | 3 | ||||
| Output Current (/RESET) | 20 | mA | 3 | ||||
| Rate of Rise (VCC) | 100 | V/µs | 3 | ||||
| ESD Rating | 3 | kV | Human body model, 1.5 kΩ in series with 100 pF | 3 | |||
| Supply Voltage (operating rating) | VCC | 1 | 5.5 | V | 3 | ||
| Reset Output Voltage (operating rating) | /RESET | 0 | 5.5 | V | 3 | ||
| Maximum Junction Temperature | TJ(MAX) | 150 | °C | 5 | |||
| Storage Temperature Range | TS | -65 | 150 | °C | 5 | ||
| Lead Temperature | 260 | °C | Soldering, 10 sec. | 5 | |||
| Junction Temperature Range | TJ | -40 | 125 | °C | Note 1 | 5 | |
| Thermal Resistance, SOT-23, 3-Ld | θJA | 203 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
MIC803-30D2VM3-TR - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3 (KiCad packages3D, STEP)
- 3D model files:
mic803-30d2vm3-tr-etched.step/mic803-30d2vm3-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic803-30d2vm3-tr.step/mic803-30d2vm3-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (20 pp, sha256
96c9285fadb8d26a, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).