main
Ray
Publish 0.1.0
a041dc9
MIC5528-3.3YMX-TR
Microchip Tech · Linear Voltage Regulators (LDO) · XDFN-6-EP(1.2x1.2)
MIC5528-3.3YMX-TR from Microchip Tech, in a XDFN-6-EP(1.2x1.2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Regulated output voltage; when the part is disabled, an internal 25 Ω load discharges the external output capacitor. |
| 2 | VOUT | power_out | Regulated output voltage; when the part is disabled, an internal 25 Ω load discharges the external output capacitor. |
| 3 | GND | power_in | Ground reference pin for the regulator. |
| 4 | EN | input | Active-high enable input (high = on, low = off) with an internal pull-down, so the pin can be left floating. |
| 5 | NC | unconnected | No connection. |
| 6 | VIN | power_in | Supply input; the operating supply range is +2.5 V to +5.5 V. |
| 7 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | XDFN-6-EP(1.2x1.2) |
| Category | Power Supply Chip |
| Pins | 7 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | -2 | 1 | 2 | % | Variation from nominal VOUT | 3 | |
| Output Voltage Accuracy over temperature | -3 | 3 | % | Variation from nominal VOUT; -40°C to +85°C | 3 | ||
| Line Regulation | 0.02 | 0.3 | %/V | VIN = VOUT + 1V to 5.5V; IOUT = 100 µA | 3 | ||
| Load Regulation | 14 | 65 | mV | IOUT = 100 µA to 500 mA | 3 | ||
| Dropout Voltage | VDO | 80 | 180 | mV | IOUT = 150 mA | 3 | |
| Dropout Voltage | VDO | 260 | 500 | mV | IOUT = 500 mA | 3 | |
| Ground Pin Current | IGND | 38 | 55 | µA | IOUT = 0 mA | 3 | |
| Ground Pin Current | IGND | 42 | 65 | µA | IOUT = 500 mA | 3 | |
| Ground Pin Current in Shutdown | ISHDN | 0.05 | 1 | µA | VEN = 0V | 3 | |
| Current Limit | ILIM | 525 | 800 | mA | VOUT = 0V | 3 | |
| Output Voltage Noise | 175 | µVRMS | f = 10 Hz to 100 kHz | 3 | |||
| Auto-Discharge NFET Resistance | 25 | Ω | VEN = 0V; VIN = 3.6V; IOUT = -3 mA | 3 | |||
| Enable Input Voltage, logic low | VEN | 0.2 | V | Logic low | 3 | ||
| Enable Input Voltage, logic high | VEN | 1.2 | V | Logic high | 3 | ||
| Enable Input Current | IEN | 0.01 | 1 | µA | VEN = 0V | 4 | |
| Enable Input Current | IEN | 1.4 | 2 | µA | VEN = 5.5V | 4 | |
| Turn-On Time | tON | 50 | 125 | µs | IOUT = 150 mA | 4 | |
| Supply Voltage (VIN) absolute maximum | VIN | -0.3 | 6 | V | 3 | ||
| ESD Rating | 3 | kV | Human body model, 1.5 kΩ in series with 100 pF (Note 2) | 3 | |||
| Supply Voltage (VIN) operating range | VIN | 2.5 | 5.5 | V | 3 | ||
| Storage Temperature Range | TS | -65 | 150 | °C | 5 | ||
| Maximum Junction Temperature Range | TJ | -40 | 150 | °C | 5 | ||
| Junction Operating Temperature Range | TJ | -40 | 125 | °C | 5 | ||
| Lead Temperature | 260 | °C | Soldering, 10s | 5 | |||
| Thermal Resistance 6-Lead Extra Thin DFN, junction to ambient | JA | 173 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
MIC5528-3.3YMX-TR - Footprint:
Package_DFN_QFN:DFN-6-1EP_1.2x1.2mm_P0.4mm_EP0.3x0.94mm_PullBack - 3D model: XDFN-6-EP(1.2x1.2) (KiCad packages3D, STEP)
- 3D model files:
mic5528-3-3ymx-tr-etched.step/mic5528-3-3ymx-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic5528-3-3ymx-tr.step/mic5528-3-3ymx-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (24 pp, sha256
4f56b145d23b9985, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MIC5528-3.3YMX-TR
**Microchip Tech** · Linear Voltage Regulators (LDO) · XDFN-6-EP(1.2x1.2)
MIC5528-3.3YMX-TR from Microchip Tech, in a XDFN-6-EP(1.2x1.2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Regulated output voltage; when the part is disabled, an internal 25 Ω load discharges the external output capacitor. |
| 2 | VOUT | power_out | Regulated output voltage; when the part is disabled, an internal 25 Ω load discharges the external output capacitor. |
| 3 | GND | power_in | Ground reference pin for the regulator. |
| 4 | EN | input | Active-high enable input (high = on, low = off) with an internal pull-down, so the pin can be left floating. |
| 5 | NC | unconnected | No connection. |
| 6 | VIN | power_in | Supply input; the operating supply range is +2.5 V to +5.5 V. |
| 7 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | XDFN-6-EP(1.2x1.2) |
| Category | Power Supply Chip |
| Pins | 7 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | | -2 | 1 | 2 | % | Variation from nominal VOUT | 3 |
| Output Voltage Accuracy over temperature | | -3 | | 3 | % | Variation from nominal VOUT; -40°C to +85°C | 3 |
| Line Regulation | | | 0.02 | 0.3 | %/V | VIN = VOUT + 1V to 5.5V; IOUT = 100 µA | 3 |
| Load Regulation | | | 14 | 65 | mV | IOUT = 100 µA to 500 mA | 3 |
| Dropout Voltage | VDO | | 80 | 180 | mV | IOUT = 150 mA | 3 |
| Dropout Voltage | VDO | | 260 | 500 | mV | IOUT = 500 mA | 3 |
| Ground Pin Current | IGND | | 38 | 55 | µA | IOUT = 0 mA | 3 |
| Ground Pin Current | IGND | | 42 | 65 | µA | IOUT = 500 mA | 3 |
| Ground Pin Current in Shutdown | ISHDN | | 0.05 | 1 | µA | VEN = 0V | 3 |
| Current Limit | ILIM | 525 | 800 | | mA | VOUT = 0V | 3 |
| Output Voltage Noise | | | | 175 | µVRMS | f = 10 Hz to 100 kHz | 3 |
| Auto-Discharge NFET Resistance | | | | 25 | Ω | VEN = 0V; VIN = 3.6V; IOUT = -3 mA | 3 |
| Enable Input Voltage, logic low | VEN | | | 0.2 | V | Logic low | 3 |
| Enable Input Voltage, logic high | VEN | 1.2 | | | V | Logic high | 3 |
| Enable Input Current | IEN | | 0.01 | 1 | µA | VEN = 0V | 4 |
| Enable Input Current | IEN | | 1.4 | 2 | µA | VEN = 5.5V | 4 |
| Turn-On Time | tON | | 50 | 125 | µs | IOUT = 150 mA | 4 |
| Supply Voltage (VIN) absolute maximum | VIN | -0.3 | | 6 | V | | 3 |
| ESD Rating | | | | 3 | kV | Human body model, 1.5 kΩ in series with 100 pF (Note 2) | 3 |
| Supply Voltage (VIN) operating range | VIN | 2.5 | | 5.5 | V | | 3 |
| Storage Temperature Range | TS | -65 | | 150 | °C | | 5 |
| Maximum Junction Temperature Range | TJ | -40 | | 150 | °C | | 5 |
| Junction Operating Temperature Range | TJ | -40 | | 125 | °C | | 5 |
| Lead Temperature | | | | 260 | °C | Soldering, 10s | 5 |
| Thermal Resistance 6-Lead Extra Thin DFN, junction to ambient | JA | | 173 | | °C/W | | 5 |
## CAD (KiCad official)
- Symbol: `MIC5528-3.3YMX-TR`
- Footprint: `Package_DFN_QFN:DFN-6-1EP_1.2x1.2mm_P0.4mm_EP0.3x0.94mm_PullBack`
- 3D model: XDFN-6-EP(1.2x1.2) (KiCad packages3D, STEP)
- 3D model files: `mic5528-3-3ymx-tr-etched.step` / `mic5528-3-3ymx-tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mic5528-3-3ymx-tr.step` / `mic5528-3-3ymx-tr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mic5528-3-3ymx-tr-datasheet.pdf) (24 pp, sha256 `4f56b145d23b9985`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mic5528-3-3ymx-tr-datasheet.pdf)