Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
MIC5524-3.3YMT-TZ
Microchip Tech · Pre-ordered MCUs · DFN-4-EP(1x1)
MIC5524-3.3YMT-TZ from Microchip Tech, in a DFN-4-EP(1x1). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Regulated output voltage; when disabled the MIC5524 switches in an internal 25Ω load to discharge the external capacitors. |
| 2 | GND | power_in | Ground. |
| 3 | EN | input | Active-high enable input (High = ON, Low = OFF) with an internal 4MΩ pulldown, so the pin can be left floating. |
| 4 | VIN | power_in | Supply input, operating range 2.5V to 5.5V. |
| 5 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | DFN-4-EP(1x1) |
| Category | Embedded Processors & Controllers |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy (25°C) | VOUT | -2 | 1 | 2 | % | Variation from nominal VOUT; VIN = VEN = VOUT + 1V; IOUT = 100µA | 3 |
| Output Voltage Accuracy (-40°C to 125°C) | VOUT | -3 | 3 | % | Variation from nominal VOUT | 3 | |
| Line Regulation | 0.02 | 0.3 | %/V | VIN = VOUT +1V to 5.5V; IOUT = 100µA | 3 | ||
| Load Regulation | 10 | mV | IOUT = 100µA to 500mA | 3 | |||
| Dropout Voltage | 80 | 175 | mV | IOUT = 150mA | 3 | ||
| Dropout Voltage | 260 | 500 | mV | IOUT = 500mA | 3 | ||
| Ground Pin Current | 38 | µA | IOUT = 0mA | 3 | |||
| Ground Pin Current | 42 | 55 | µA | IOUT = 500mA | 3 | ||
| Ground Pin Current in Shutdown | 0.05 | 1 | µA | VEN = 0V | 3 | ||
| Ripple Rejection | PSRR | 80 | dB | f = 100Hz | 3 | ||
| Ripple Rejection | PSRR | 65 | dB | f = 1kHz | 3 | ||
| Current Limit | 525 | 800 | mA | VOUT = 0V | 3 | ||
| Output Voltage Noise | 80 | µVRMS | f =10Hz to 100kHz | 3 | |||
| Auto-Discharge NFET Resistance | 25 | Ω | VEN = 0V; VIN = 3.6V; IOUT = -3mA | 3 | |||
| Enable Pulldown Resistor | 4 | MΩ | 3 | ||||
| Enable Input Voltage Logic Low | VEN | 0.2 | V | Logic Low | 3 | ||
| Enable Input Voltage Logic High | VEN | 1.2 | V | Logic High | 3 | ||
| Enable Input Current | 0.01 | 1 | µA | VEN = 0V | 3 | ||
| Enable Input Current | 1.4 | 2 | µA | VEN = 5.5V | 3 | ||
| Turn-On Time | 50 | 125 | µs | IOUT = 150mA | 3 | ||
| Supply Voltage (absolute max) | VIN | -0.3 | 6 | V | 3 | ||
| Enable Voltage (absolute max) | VEN | -0.3 | V | max is VIN | 3 | ||
| Lead Temperature (soldering, 10s) | 260 | °C | soldering, 10s | 3 | |||
| Junction Temperature (absolute max) | TJ | -40 | 150 | °C | 3 | ||
| Storage Temperature | Ts | -65 | 150 | °C | 3 | ||
| ESD Rating | 3 | kV | Human body model, 1.5kΩ in series with 100pF | 3 | |||
| Supply Voltage (operating) | VIN | 2.5 | 5.5 | V | 3 | ||
| Enable Voltage (operating) | VEN | 0 | V | max is VIN | 3 | ||
| Junction Temperature (operating) | TJ | -40 | 125 | °C | 3 | ||
| Junction Thermal Resistance | θJA | 250 | °C/W | 1mm × 1mm Thin DFN-4 | 3 |
CAD (KiCad official)
- Symbol:
MIC5524-3.3YMT-TZ - Footprint:
Package_DFN_QFN:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm - 3D model: DFN-4-EP(1x1) (KiCad packages3D, STEP)
- 3D model files:
mic5524-3-3ymt-tz-etched.step/mic5524-3-3ymt-tz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic5524-3-3ymt-tz.step/mic5524-3-3ymt-tz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (13 pp, sha256
d33d4e2a3f0ec00b, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).