Generated by kicad-footprint-generator · KiCad file format 20260206
MIC5357-MGYMME
Microchip Tech · Linear Voltage Regulators (LDO) · MSOP-8-EP
MIC5357-MGYMME from Microchip Tech, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply input; the datasheet specifies an operating range of 2.6V to 5.5V with an absolute maximum of -0.3V to +6V. |
| 2 | GND | power_in | Ground reference for the device, to which the BYP capacitor connects and to which the ePAD heatsink is internally connected. |
| 3 | BYP | passive | Reference bypass pin; connect an external 0.1µF capacitor to GND to reduce output noise, or leave open if no bypass capacitor is required. |
| 4 | EN2 | input | Active-high enable for regulator 2 (logic high = on, logic low = off); it must not be left floating, and the enable input voltage is limited to 0V to VIN. |
| 5 | EN1 | input | Active-high enable for regulator 1 (logic high = on, logic low = off); it must not be left floating, and the enable input voltage is limited to 0V to VIN. |
| 6 | NC | unconnected | Not internally connected. |
| 7 | VOUT2 | power_out | Regulator output for LDO2. |
| 8 | VOUT1 | power_out | Regulator output for LDO1. |
| 9 | HS Pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8-EP |
| Category | Power Supply Chip |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VIN) absolute maximum | VIN | -0.3 | 6 | V | 4 | ||
| Enable Input Voltage (VEN1, VEN2) absolute minimum | -0.3 | V | 4 | ||||
| Storage Temperature | TS | -65 | 150 | °C | 4 | ||
| ESD Rating | 2 | kV | Human body model 1.5kΩ in series with 100pF | 4 | |||
| Supply Voltage (VIN) operating | VIN | 2.6 | 5.5 | V | 4 | ||
| Enable Input Voltage (VEN1, VEN2) operating minimum | 0 | V | 4 | ||||
| Junction Temperature | TJ | -40 | 125 | °C | 4 | ||
| Variation from nominal VOUT (output voltage accuracy) | -2 | 2 | % | 4 | |||
| Output Voltage Accuracy over temperature | -3 | 3 | % | Variation from nominal VOUT; -40°C to +125°C | 4 | ||
| Line Regulation | 0.05 | 0.3 | %/V | VIN = VOUT + 1V to 5.5V; IOUT = 100µA | 4 | ||
| Line Regulation (second printed max value) | 0.6 | %/V | VIN = VOUT + 1V to 5.5V; IOUT = 100µA | 4 | |||
| Load Regulation | 0.7 | 2.5 | % | IOUT1&2 =100µA to 500mA | 4 | ||
| Dropout Voltage | 12 | 50 | mV | IOUT1,2 = 50mA | 4 | ||
| Dropout Voltage | 130 | 300 | mV | IOUT1,2 = 500mA | 4 | ||
| Dropout Voltage | 0.1 | mV | IOUT1,2 = 100µA | 4 | |||
| Ground Current | 95 | 175 | µA | VEN1 ≥ 1.2V; VEN2 ≤ 0.2V; IOUT = 0mA to 500mA | 4 | ||
| Ground Current | 160 | 240 | µA | VEN1 = VEN2 ≥ 1.2V; IOUT1 = 500mA, IOUT2 = 500mA | 4 | ||
| Ground Current in Shutdown | 0.01 | 2 | µA | VEN1 = VEN2 = 0V | 4 | ||
| Ripple Rejection | 70 | dB | f = 1kHz; COUT = 2.2µF; CBYP = 0.1µF | 4 | |||
| Ripple Rejection | 45 | dB | f = 20kHz; COUT = 2.2µF; CBYP = 0.1µF | 4 | |||
| Current Limit (VOUT1) | 550 | 950 | 1300 | mA | VOUT1 = 0V | 4 | |
| Current Limit (VOUT2) | 550 | 950 | 1300 | mA | VOUT2 = 0V | 4 | |
| Output Voltage Noise | 51 | µVRMS | COUT = 2.2µF; CBYP = 0.1µF; 10Hz to 100kHz | 4 | |||
| Enable Input Voltage Logic Low | 0.2 | V | 4 | ||||
| Enable Input Voltage Logic High | 1.2 | V | 4 | ||||
| Enable Input Current | 0.01 | µA | VIL ≤ 0.2V | 4 | |||
| Turn-on Time (LDO1 and 2) | 38 | 100 | µs | COUT = 2.2µF; CBYP = 0.1µF | 4 |
CAD (KiCad official)
- Symbol:
MIC5357-MGYMME - Footprint:
Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm - 3D model: MSOP-8-EP (KiCad packages3D, STEP)
- 3D model files:
mic5357-mgymme-etched.step/mic5357-mgymme-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic5357-mgymme.step/mic5357-mgymme.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (11 pp, sha256
93d97754250c350a, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).