main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mic5319yml-tr: viewers · Ray
mic5319yml-tr-etched.glb Publish 0.1.0 · Ray
mic5319yml-tr-etched.step mic5319yml-tr: factory component page (tier=mfr) · Ray
mic5319yml-tr-hero.glb mic5319yml-tr: hero GLB from the etched model (keeps the MPN mark) · Ray
mic5319yml-tr-hero.overlay.json Publish 0.1.0 · Ray
mic5319yml-tr.glb Publish 0.1.0 · Ray
mic5319yml-tr.kicad_mod Publish 0.1.0 · Ray
mic5319yml-tr.kicad_sym Publish 0.1.0 · Ray
mic5319yml-tr.lbr Publish 0.1.0 · Ray
mic5319yml-tr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 7 pins · Ray

MIC5319YML-TR

Microchip Tech · Pre-ordered MCUs · DFN-6-EP(2x2)

MIC5319YML-TR from Microchip Tech, in a DFN-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Active-high enable input (High = regulator ON, Low = regulator OFF); must not be left floating, operating range 0V to VIN.
2 GND power_in Ground.
3 VIN power_in Input voltage, 2.5V to 5.5V operating range, requires at least 1 µF capacitor to ground.
4 VOUT power_out Regulated output voltage, requires 2.2 µF or greater output capacitor for stability.
5 ADJ input Adjustable input: connect to the external resistor divider network to set the output voltage (VREF = 1.25V).
6 BYP passive Reference bypass: connect external 0.1 µF to GND for reduced output noise; may be left open.
7 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package DFN-6-EP(2x2)
Category Embedded Processors & Controllers
Pins 7

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Accuracy ΔVOUT -1 1 % Variation from nominal VOUT 4
Output Voltage Accuracy (over temperature) ΔVOUT -2 2 % Variation from nominal VOUT, IOUT = 100 µA to 500 mA 4
Feedback Voltage (Adj. Option) VADJ 1.2375 1.25 1.2625 V 4
Feedback Voltage (Adj. Option, second row) VADJ 1.225 1.25 1.275 V 4
Line Regulation ΔVOUT/(VOUT x ΔVIN) 0.04 0.3 %/V VIN = VOUT +1V to +5.5V 4
Load Regulation ΔVOUT/VOUT 0.1 0.5 % IL = 100 µA to 500 mA 4
Dropout Voltage VDO 20 40 mV IOUT = 50 mA 4
Dropout Voltage VDO 200 400 mV IOUT = 500 mA 4
Ground Pin Current IGND 90 150 µA IOUT = 0 mA to 500 mA 4
Current Limit ILIMIT 600 700 mA VOUT = 0V 4
Turn-On Time tON 40 100 µs COUT = 2.2 µF; CBYP = 0.1 µF 4
Enable Input Voltage Low VENABLE 0.2 V Logic Low (Regulator Shutdown) 4
Enable Input Voltage High VENABLE 1.2 V Logic High (Regulator Enabled) 4
Enable Input Current IENABLE 0.01 1 µA VIL = ≤ 0.2V (Regulator Shutdown) 4
Supply Input Voltage (absolute maximum) VIN 0 6 V 3
Enable Input Voltage (absolute maximum) VEN 0 6 V 3
ESD Rating 3 kV HBM 3
Supply Input Voltage (operating) VIN 2.5 5.5 V 3
Enable Input Voltage (operating) VEN 0 V 0V to VIN 3
Junction Operating Temperature Range TJ -40 125 °C 5
Storage Temperature Range TS -65 150 °C 5
Lead Temperature 260 °C Soldering, 5s 5
Thermal Resistance DFN-6 θJA 93 °C/W 5
Ground Pin Current in Shutdown Mode ISHDN 0.5 µA VEN ≤ 0.2V 4
Power Supply Ripple Rejection PSRR 70 dB f = up to 1 kHz; COUT = 2.2 µF ceramic; CBYP = 0.1 µF 4
Power Supply Ripple Rejection PSRR 60 dB f = 10 kHz; COUT = 2.2 µF ceramic; CBYP = 0.1 µF 4
Output Voltage Noise eN 40 µVRMS COUT = 2.2 µF; CBYP = 0.1 µF; 10 Hz to 100 kHz 4

CAD (KiCad official)

  • Symbol: MIC5319YML-TR
  • Footprint: Package_DFN_QFN:DFN-6-1EP_2x2mm_P0.65mm_EP1x1.6mm
  • 3D model: DFN-6-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: mic5319yml-tr-etched.step / mic5319yml-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic5319yml-tr.step / mic5319yml-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (22 pp, sha256 3e8d3937855e3c5c, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF