3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMIC5319-5.0YML-TR
Microchip Tech · Pre-ordered MCUs · DFN-6-EP(2x2)
MIC5319-5.0YML-TR from Microchip Tech, in a DFN-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Active-high enable input: high turns the regulator on and low turns it off into a zero-off-mode state, and it must not be left floating. |
| 2 | GND | power_in | Ground reference pin for the regulator. |
| 3 | VIN | power_in | Input voltage pin, specified for a supply range of 2.5V to 5.5V. |
| 4 | VOUT | power_out | Regulated output voltage pin, which requires an output capacitor of 2.2 µF or greater for stability. |
| 5 | NC | unconnected | Not connected for the DFN fixed output voltage version. |
| 6 | BYP | passive | Reference bypass pin: connect an external 0.1 µF to GND for reduced output noise, or leave it open. |
| 7 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | DFN-6-EP(2x2) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 7 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | ∆VOUT | -1 | 1 | % | Variation from nominal VOUT | 4 | |
| Output Voltage Accuracy | ∆VOUT | -2 | 2 | % | Variation from nominal VOUT, IOUT = 100 µA to 500 mA | 4 | |
| Line Regulation | ∆VOUT/(VOUT x ∆VIN) | 0.04 | 0.3 | %/V | VIN = VOUT +1V to +5.5V | 4 | |
| Load Regulation | ∆VOUT/VOUT | 0.1 | 0.5 | % | IL = 100 µA to 500 mA | 4 | |
| Dropout Voltage | VDO | 20 | 40 | mV | IOUT = 50 mA | 4 | |
| Dropout Voltage | VDO | 200 | 400 | mV | IOUT = 500 mA | 4 | |
| Ground Pin Current | IGND | 90 | 150 | µA | IOUT = 0 mA to 500 mA | 4 | |
| Current Limit | ILIMIT | 600 | 700 | mA | VOUT = 0V | 4 | |
| Turn-On Time | tON | 40 | 100 | µs | COUT = 2.2 µF; CBYP = 0.1 µF | 4 | |
| Enable Input Voltage Logic Low | VENABLE | 0.2 | V | Logic Low (Regulator Shutdown) | 4 | ||
| Enable Input Voltage Logic High | VENABLE | 1.2 | V | Logic High (Regulator Enabled) | 4 | ||
| Enable Input Current | IENABLE | 0.01 | 1 | µA | VIL = ≤ 0.2V (Regulator Shutdown) | 4 | |
| Junction Operating Temperature Range | TJ | -40 | 125 | °C | 5 | ||
| Storage Temperature Range | TS | -65 | 150 | °C | 5 | ||
| Lead Temperature | 260 | °C | Soldering, 5s | 5 | |||
| Supply Input Voltage (VIN) absolute maximum | VIN | 0 | 6 | V | 3 | ||
| Enable Input Voltage absolute maximum | VEN | 0 | 6 | V | 3 | ||
| Supply Input Voltage (VIN) operating range | VIN | 2.5 | 5.5 | V | 3 | ||
| Enable Input Voltage operating range | VEN | 0 | V | 0V to VIN | 3 | ||
| Ground Pin Current in Shutdown Mode | ISHDN | 0.5 | µA | VEN ≤ 0.2V | 4 | ||
| Power Supply Ripple Rejection | PSRR | 70 | dB | f = up to 1 kHz; COUT = 2.2 µF ceramic; CBYP = 0.1 µF | 4 | ||
| Power Supply Ripple Rejection | PSRR | 60 | dB | f = 10 kHz; COUT = 2.2 µF ceramic; CBYP = 0.1 µF | 4 | ||
| Output Voltage Noise | eN | 40 | µVRMS | COUT = 2.2 µF; CBYP = 0.1 µF; 10 Hz to 100 kHz | 4 | ||
| Thermal Resistance DFN-6 | θJA | 93 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
MIC5319-5.0YML-TR - Footprint:
Package_DFN_QFN:DFN-6-1EP_2x2mm_P0.65mm_EP1x1.6mm - 3D model: DFN-6-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
mic5319-5-0yml-tr-etched.step/mic5319-5-0yml-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic5319-5-0yml-tr.step/mic5319-5-0yml-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (22 pp, sha256
3e8d3937855e3c5c, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).