3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMIC5309-1.8YD6-TR
Microchip Tech · Linear Voltage Regulators (LDO) · TSOT-23-6
MIC5309-1.8YD6-TR from Microchip Tech, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input for the LDO; operating range +1.7V to VBIAS. |
| 2 | GND | power_in | Ground. |
| 3 | BIAS | power_in | Bias input voltage powering the control circuitry; operating range +2.5V to +5.5V, with a 1µF ceramic capacitor to ground recommended. |
| 4 | BYP/ADJ | passive | Bypass pin: connect a capacitor to ground to reduce noise (0.01µF recommended); on the adjustable version it is the feedback input from an external resistor divider (0.775V reference). |
| 5 | EN | input | Active-high enable input (logic high = on, logic low = off, logic low ≤0.2V, logic high ≥1.2V); must not be left floating. |
| 6 | VOUT | power_out | Regulator output, up to 300mA, stable with a 1µF or greater ceramic output capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TSOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | VOUT | -2 | 2 | % | Variation from nominal VOUT | 3 | |
| VBIAS Line Regulation | 0.01 | 0.3 | %/V | VBIAS = 3.6 to 5.5V, VIN = VOUT + 1V | 3 | ||
| VIN Line Regulation | 0.02 | 0.2 | %/V | VIN = VOUT + 1V , VBIAS = 5.5V | 3 | ||
| Load Regulation | 0.4 | 2 | % | IOUT = 100µA to 300mA | 3 | ||
| Dropout Voltage | 100 | 200 | mV | IOUT = 300mA | 3 | ||
| Ground Pin Current | IGND | 23 | 35 | µA | IOUT = 100µA to 300mA , VEN = VBIAS | 3 | |
| Ground Pin Current in Shutdown | 0.01 | 2 | µA | VEN ≤ 0.2V | 3 | ||
| VIN Ripple Rejection (CBYP = 10nF) | PSRR | 50 | 90 | dB | f = up to 1kHz; COUT = 1.0µF; CBYP = 10nF | 3 | |
| Current Limit | 350 | 550 | 800 | mA | VOUT = 0V | 3 | |
| Enable Input Voltage Logic Low | VEN | 0.2 | V | Logic Low | 3 | ||
| Enable Input Voltage Logic High | VEN | 1.2 | V | Logic High | 3 | ||
| Enable Input Current (low) | 0.17 | 1 | µA | VIL ≤ 0.2V | 3 | ||
| Enable Input Current (high) | 1.5 | 1 | µA | VIH ≥ 1.2V | 3 | ||
| Turn-on Time | 150 | 500 | µs | COUT = 1.0µF, CBYP = 10nF | 3 | ||
| VIN Ripple Rejection (no CBYP) | PSRR | 70 | dB | f = up to 1kHz; COUT = 1.0µF; no CBYP | 3 | ||
| VIN Ripple Rejection (20kHz) | PSRR | 80 | dB | f = 20kHz; COUT = 1.0µF; CBYP = 10nF | 3 | ||
| Output Voltage Noise | 28 | µVRMS | COUT = 1.0µF, CBYP = 10nF, 10Hz to 100kHz | 3 | |||
| Supply Voltage (VIN) absolute maximum | VIN | 0 | V | 0V to VBIAS | 3 | ||
| Bias Supply Voltage absolute maximum | VBIAS | 0 | 6 | V | 3 | ||
| Enable Voltage absolute maximum | VEN | 0 | V | 0V to VBIAS | 3 | ||
| Lead Temperature | 260 | °C | soldering, 10µsec | 3 | |||
| Storage Temperature | Ts | -65 | 150 | °C | 3 | ||
| ESD Rating | 3 | kV | Human body model, 1.5kΩ in series with 100pF | 3 | |||
| Supply Voltage (VIN) operating | VIN | 1.7 | V | +1.7V to VBIAS | 3 | ||
| Bias Supply Voltage operating | VBIAS | 2.5 | 5.5 | V | 3 | ||
| Enable Input Voltage operating | VEN | 0 | V | 0V to VBIAS | 3 | ||
| Junction Temperature | TJ | -40 | 125 | °C | 3 |
CAD (KiCad official)
- Symbol:
MIC5309-1.8YD6-TR - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
mic5309-1-8yd6-tr-etched.step/mic5309-1-8yd6-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic5309-1-8yd6-tr.step/mic5309-1-8yd6-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (11 pp, sha256
770f2957e970f544, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).