3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMIC5308-1.2YMT-TR
Microchip Tech · Linear Voltage Regulators (LDO) · MLF-6
MIC5308-1.2YMT-TR from Microchip Tech, in a MLF-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BIAS | power_in | Bias input voltage powering the control circuitry, operating range 2.5V to 5.5V, with a 1µF ceramic bypass capacitor to ground recommended. |
| 2 | GND | power_in | Ground. |
| 3 | VIN | power_in | Power input for the LDO, operating range 1.6V to VBIAS. |
| 4 | VOUT | power_out | Regulator output, delivers up to 150mA and requires at least a 1µF output capacitor for stability. |
| 5 | EN | input | Active-high enable input (logic high = on, logic low = off) that must not be left floating, with logic low at or below 0.2V and logic high at or above 1.2V. |
| 6 | BYP/ADJ | passive | Bypass pin (fixed-output versions) for a capacitor to ground to reduce noise, or feedback input from the external resistor divider on the adjustable version. |
| 7 | EPAD | power_in | Exposed heatsink pad connected to ground internally. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MLF-6 |
| Category | Power Management |
| Pins | 7 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | VOUT | -2 | 2 | % | Variation from nominal VOUT | 3 | |
| VBIAS Line Regulation | 0.01 | 0.3 | %/V | VBIAS = 3.6 to 5.5V, VIN = VOUT + 1V | 3 | ||
| VIN Line Regulation | 0.02 | 0.2 | %/V | VIN = VOUT + 1V, VBIAS = 5.5V | 3 | ||
| Load Regulation | 0.2 | 1 | % | IOUT = 100µA to 150mA | 3 | ||
| Dropout Voltage | 45 | 150 | mV | IOUT = 150mA | 3 | ||
| Ground Pin Current | IGND | 23 | 35 | µA | IOUT = 100µA to 150mA | 3 | |
| Ground Pin Current in Shutdown | 0.01 | 2 | µA | VEN ≤ 0.2V | 3 | ||
| VIN Ripple Rejection (no CBYP) | PSRR | 70 | dB | f = up to 1kHz; COUT = 1.0µF; no CBYP | 3 | ||
| VIN Ripple Rejection (1kHz) | PSRR | 50 | 90 | dB | f = up to 1kHz; COUT = 1.0µF; CBYP = 10nF | 3 | |
| VIN Ripple Rejection (20kHz) | PSRR | 80 | dB | f = 20kHz; COUT = 1.0µF; CBYP = 10nF | 3 | ||
| Current Limit | ILIM | 180 | 325 | mA | f = up to 1kHz;COUT = 1.0µF; CBYP = 10nF | 3 | |
| Enable Input Voltage Logic Low | VIL | 0.2 | V | Logic Low | 3 | ||
| Enable Input Voltage Logic High | VIH | 1.2 | V | Logic High | 3 | ||
| Enable Input Current Low | 0.17 | 1 | µA | VIL ≤ 0.2V | 3 | ||
| Enable Input Current High | 1 | µA | VIH ≥ 1.2V | 3 | |||
| Turn-on Time | 150 | 500 | µs | COUT = 1.0µF; CBYP = 10nF | 3 | ||
| Output Voltage Noise | 28 | µVRMS | f = 20kHz; COUT = 1.0µF; CBYP = 10nF | 3 | |||
| Supply Voltage (absolute maximum) | VIN | 0 | V | 0V to VBIAS | 3 | ||
| Bias Supply Voltage (absolute maximum) | VBIAS | 0 | 6 | V | 3 | ||
| Enable Voltage (absolute maximum) | VEN | 0 | V | 0V to VBIAS | 3 | ||
| Lead Temperature | 260 | °C | soldering, 10µsec | 3 | |||
| Storage Temperature | Ts | -65 | 150 | °C | 3 | ||
| ESD Rating | 3 | kV | Human body model, 1.5kΩ in series with 100pF | 3 | |||
| Supply Voltage (operating) | VIN | 1.6 | V | +1.6V to VBIAS | 3 | ||
| Bias Supply Voltage (operating) | VBIAS | 2.5 | 5.5 | V | 3 | ||
| Enable Input Voltage (operating) | VEN | 0 | V | 0V to VBIAS | 3 | ||
| Junction Temperature | TJ | -40 | 125 | °C | 3 | ||
| Junction Thermal Resistance | θJA | 90 | °C/W | 1.6x1.6 MLF-6 | 3 |
CAD (KiCad official)
- Symbol:
MIC5308-1.2YMT-TR - Footprint:
Package_DFN_QFN:MLF-6-1EP_1.6x1.6mm_P0.5mm_EP0.5x1.26mm - 3D model: MLF-6 (KiCad packages3D, STEP)
- 3D model files:
mic5308-1-2ymt-tr-etched.step/mic5308-1-2ymt-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic5308-1-2ymt-tr.step/mic5308-1-2ymt-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (11 pp, sha256
c1858112b59334c9, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).