3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMIC5265-1.8YD5-TR
Microchip Tech · Pre-ordered MCUs · TSOT-23-5
MIC5265-1.8YD5-TR from Microchip Tech, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Supply voltage input with an operating range of +2.7V to +5.5V and an absolute maximum of 7V. |
| 2 | GND | power_in | Ground reference pin for the regulator. |
| 3 | EN | input | CMOS-compatible enable/shutdown input where logic high enables the regulator and logic low shuts it down, and it must not be left open. |
| 4 | BYP | passive | Reference bypass pin where an external 0.01µF to 1.0µF capacitor to GND reduces output noise, and it may be left open. |
| 5 | OUT | power_out | Regulated output, which requires a 1µF or greater low-ESR ceramic output capacitor for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TSOT-23-5 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | -2 | 2 | % | IOUT = 100µA | 4 | ||
| Output Voltage Accuracy | -3 | 3 | % | IOUT = 100µA; bold values for -40°C < TA < +85°C | 4 | ||
| Line Regulation | 0.05 | 0.2 | % | VIN = VOUT +1V to 5.5V | 4 | ||
| Load Regulation | 2 | 3 | % | IOUT = 0.1mA to 150mA | 4 | ||
| Dropout Voltage | 210 | 500 | mV | IOUT = 150mA | 4 | ||
| Quiescent Current | 0.2 | 2 | µA | VEN < 0.2V | 4 | ||
| Ground Pin Current | 75 | 120 | µA | IOUT = 0mA | 4 | ||
| Ground Pin Current | 80 | 150 | µA | IOUT = 150mA | 4 | ||
| Enable Input Logic Low | 0.2 | V | VIN = 2.7V to 5.5V, regulator shutdown | 4 | |||
| Enable Input Logic High | 1.6 | V | VIN = 2.7V to 5.5V, regulator enabled | 4 | |||
| Turn-on Time | 40 | 150 | µs | 4 | |||
| Thermal Shutdown Temperature | 150 | °C | 4 | ||||
| Hysteresis | 10 | °C | 4 | ||||
| Supply Input Voltage (VIN) | VIN | 0 | 7 | V | 4 | ||
| Enable Input Voltage (VEN1) | VEN1 | 0 | 7 | V | 4 | ||
| Junction Temperature (TJ) | TJ | -40 | 125 | °C | 4 | ||
| Lead Temperature (soldering, 5 sec.) | 260 | °C | soldering, #sec. as printed | 4 | |||
| Storage Temperature (Ts) | Ts | -55 | 150 | °C | 4 | ||
| EDS Rating | 2 | kV | Human body model, 1.5k in series with 100pF | 4 | |||
| Supply Input Voltage (VIN) | VIN | 2.7 | 5.5 | V | 4 | ||
| Junction Temperature (TA) | TA | -40 | 125 | °C | 4 | ||
| Enable Input Voltage (VEN) | VEN | 0 | V | 0V to +VIN | 4 | ||
| Dropout Voltage | 75 | mV | IOUT = 50mA | 4 | |||
| Output Noise | 57 | µV (rms) | COUT = 1.0µF, CBYP = 0.1µF, f = 10Hz to 100kHz | 4 | |||
| Enable Input Current | 0.01 | µA | VIL < 0.4V, regulator shutdown | 4 | |||
| PSRR (Ripple Rejection) | 62 | dB | f = 100Hz, CBYP = 0.1µF, ILOAD = 50mA | 4 | |||
| PSRR (Ripple Rejection) | 64 | dB | f = 1kHz, CBYP = 0.1µF, ILOAD = 50mA | 4 | |||
| Current Limit | 225 | mA | VOUT = 0V | 4 | |||
| Discharge Resistance | 500 | Ω | 4 | ||||
| Junction-to-Ambient Thermal Resistance (Thin SOT-23-5) | θJA | 235 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
MIC5265-1.8YD5-TR - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mic5265-1-8yd5-tr-etched.step/mic5265-1-8yd5-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic5265-1-8yd5-tr.step/mic5265-1-8yd5-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (11 pp, sha256
3ad0f41384761ec1, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).