3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMIC5255-3.0YM5-TR
Microchip Tech · Linear Voltage Regulators (LDO) · SOT-23-5
MIC5255-3.0YM5-TR from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Supply input for the regulator, with an operating supply range of 2.7 V to 6 V. |
| 2 | GND | power_in | Ground pin for the regulator. |
| 3 | EN | input | CMOS-compatible enable/shutdown input: logic-high enables the regulator, logic-low shuts it down, and the pin must not be left open. |
| 4 | BYP | passive | Reference bypass pin: connect an external capacitor of 0.01 µF to 1.0 µF to GND to reduce output noise, or leave it open. |
| 5 | OUT | power_out | Regulator output, which requires an output capacitor of 1 µF or greater for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Power Management |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | VO | -1 | 1 | % | IOUT = 100 µA; TJ = 25°C (non-bold) | 4 | |
| Output Voltage Accuracy (over temperature) | VO | -2 | 2 | % | IOUT = 100 µA; bold values, -40°C ≤ TJ ≤ +125°C | 4 | |
| Line Regulation | ΔVLNR | 0.02 | 0.05 | %/V | VIN = VOUT + 1V to 6V | 4 | |
| Load Regulation | ΔVLDR | 1.5 | 2.5 | % | IOUT = 0.1 mA to 150 mA; Note 2 | 4 | |
| Dropout Voltage | VIN, VOUT | 0.1 | 5 | mV | IOUT = 100 µA | 4 | |
| Dropout Voltage | VIN, VOUT | 90 | 150 | mV | IOUT = 100 mA | 4 | |
| Dropout Voltage | VIN, VOUT | 135 | 200 | mV | IOUT = 150 mA | 4 | |
| Quiescent Current | IQ | 0.2 | 5 | µA | VEN ≤ 0.4V (shutdown) | 4 | |
| Ground Pin Current | IGND | 90 | 150 | µA | IOUT = 0 mA | 4 | |
| Current Limit | ILIM | 160 | 425 | mA | VOUT = 0V | 4 | |
| Enable Input Logic-Low Voltage | VIL | 0.4 | V | VIN = 2.7V to 5.5V, regulator shutdown | 4 | ||
| Enable Input Logic-High Voltage | VIH | 1.6 | V | VIN = 2.7V to 5.5V, regulator enabled | 4 | ||
| Shutdown Resistance Discharge | 500 | Ω | 4 | ||||
| Thermal Shutdown Temperature | 150 | °C | 4 | ||||
| Thermal Shutdown Hysteresis | 10 | °C | 4 | ||||
| Supply Voltage (VIN) operating range | VIN | 2.7 | 6 | V | Operating Ratings | 3 | |
| Enable Voltage (VEN) operating range | VEN | 0 | V | Operating Ratings; maximum printed as VIN | 3 | ||
| Output capacitor COUT | COUT | 1 | µF | Ceramic output capacitor required for stability (Section 4.3) | 11 | ||
| Output capacitor ESR | ESR | 300 | mΩ | Maximum recommended ESR (Section 4.3) | 11 | ||
| Bypass capacitor CBYP | CBYP | 0.01 | 1 | µF | Connect external capacitor to GND (Pin Description) | 10 | |
| Supply Voltage (VIN) absolute maximum | VIN | 0 | 7 | V | Absolute Maximum Ratings | 3 | |
| Enable Voltage (VEN) absolute maximum | VEN | 0 | 7 | V | Absolute Maximum Ratings | 3 | |
| ESD Rating | 2 | kV | Human body model, 1.5 kΩ in series with 100 pF (Note 2) | 3 | |||
| Junction Operating Temperature Range | TJ | -40 | 125 | °C | Note 1 | 5 | |
| Storage Temperature | TS | -60 | 150 | °C | 5 | ||
| Lead Temperature | 260 | °C | Soldering, 5s | 5 | |||
| Thermal Resistance, SOT-23-5 | θJA | 235 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
MIC5255-3.0YM5-TR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mic5255-3-0ym5-tr-etched.step/mic5255-3-0ym5-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic5255-3-0ym5-tr.step/mic5255-3-0ym5-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (22 pp, sha256
9eb5a05199e502c9, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).