main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mic5236-5-0ym: viewers rendered from the public page · Ray
mic5236-5-0ym-etched.glb mic5236-5-0ym: factory component page (tier=mfr) · Ray
mic5236-5-0ym-etched.step mic5236-5-0ym: factory component page (tier=mfr) · Ray
mic5236-5-0ym-hero.glb mic5236-5-0ym: hero GLB from the etched model (keeps the MPN mark) · Ray
mic5236-5-0ym-hero.overlay.json mic5236-5-0ym: hero GLB from the etched model (keeps the MPN mark) · Ray
mic5236-5-0ym.glb Publish 0.1.0 · Ray
mic5236-5-0ym.kicad_mod Publish 0.1.0 · Ray
mic5236-5-0ym.kicad_sym Publish 0.1.0 · Ray
mic5236-5-0ym.lbr Publish 0.1.0 · Ray
mic5236-5-0ym.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

MIC5236-5.0YM-TR

Microchip Tech · Linear Voltage Regulators (LDO) · SOIC-8

MIC5236-5.0YM-TR from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 /ERR output Open-collector error flag output, active low when the output is out of regulation due to insufficient input voltage or excessive load; requires an external pull-up resistor (200k to 1MΩ suggested) and may be left unconnected if unused.
2 IN power_in Power supply input, operating range 2.3V to 30V (absolute maximum -20V to +60V for limited duration).
3 OUT power_out Regulated 5.0V output, capable of 150mA, stable with a ceramic or tantalum output capacitor of 1.0µF minimum.
4 EN input Enable input, logic low (≤0.6V) = shutdown, logic high (≥2.0V) = enabled.
5 GND power_in Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe and can be soldered to a ground plane for heat sinking.
6 GND power_in Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe and can be soldered to a ground plane for heat sinking.
7 GND power_in Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe and can be soldered to a ground plane for heat sinking.
8 GND power_in Ground; pins 5, 6, 7 and 8 are internally connected in common via the leadframe and can be soldered to a ground plane for heat sinking.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Accuracy (variation from nominal VOUT) VOUT -1 1 1 % variation from nominal VOUT 3
Output Voltage Accuracy (variation from nominal VOUT, wide temperature) VOUT -2 2 % 3
Output Voltage Temperature Coefficient ΔVOUT/ΔT 50 50 ppm/°C Note 6 3
Line Regulation ΔVOUT/VOUT 0.2 0.5 % VIN = VOUT + 1V to 30V 3
Line Regulation (wide temperature) ΔVOUT/VOUT 1 % 3
Load Regulation (100µA to 50mA) ΔVOUT/VOUT 0.15 0.3 % IOUT = 100µA to 50mA, Note 7 3
Load Regulation (100µA to 50mA, wide temperature) ΔVOUT/VOUT 0.5 % 3
Load Regulation (100µA to 150mA) ΔVOUT/VOUT 0.3 0.6 % IOUT = 100µA to 150mA, Note 7 3
Load Regulation (100µA to 150mA, wide temperature) ΔVOUT/VOUT 1 % 3
Dropout Voltage (100µA) ΔV 50 100 mV IOUT = 100µA 3
Dropout Voltage (50mA) ΔV 230 400 mV IOUT = 50mA 3
Dropout Voltage (150mA) ΔV 300 500 mV IOUT = 150mA 3
Ground Pin Current (100µA) IGND 20 30 µA VEN ≥ 2.0V, IOUT = 100µA 3
Ground Pin Current (50mA) IGND 0.5 0.8 mA VEN ≥ 2.0V, IOUT = 50mA 3
Ground Pin Current (150mA) IGND 2.8 4 mA VEN ≥ 2.0V, IOUT = 150mA 3
Ground Pin Current (150mA, wide temperature) IGND 5 mA 3
Ground Pin Current in Shutdown IGND(SHDN) 0.1 1 µA VEN ≤ 0.6V, VIN = 30V 3
Short Circuit Current ISC 260 350 mA VOUT = 0V 3
ERR Low Threshold VTH/ERR 90 94 % % of VOUT 3
ERR High Threshold VTH/ERR 95 98 % % of VOUT 3
ERR Output Low Voltage VOL/ERR 150 250 mV VIN = VOUT(nom), 0.12VOUT, IOL = 200µA 3
ERR Output Low Voltage (wide temperature) VOL/ERR 400 mV 3
ERR Output Leakage ILEAK/ERR 0.1 1 µA VOH = 30V 3
ERR Output Leakage (wide temperature) ILEAK/ERR 2 µA 3
Enable Input Low Voltage VIL 0.6 V regulator off 3
Enable Input High Voltage VIH 2 V regulator on 3
Enable Input Current (VEN = 0.6V, regulator off) IIN 0.01 1 µA VEN = 0.6V, regulator off 4
Enable Input Current (VEN = 0.6V, regulator off, wide temperature) IIN 2 µA 4
Enable Input Current (VEN = 2.0V, regulator on) IIN 0.15 1 µA VEN = 2.0V, regulator on 4
Enable Input Current (VEN = 2.0V, regulator on, wide temperature) IIN 2 µA 4
Enable Input Current (VEN = 30V, regulator on) IIN 0.5 2.5 µA VEN = 30V, regulator on 4
Enable Input Current (VEN = 30V, regulator on, wide temperature) IIN 5 µA 4
Supply Voltage (VIN) absolute maximum VIN -20 60 V Note 3: +60V limited to ≤100 ms, duty cycle ≤1% 3
Junction Temperature absolute maximum TJ 150 °C 3
Storage Temperature TS -65 150 °C 3
Lead Temperature (soldering) 260 °C soldering, 5 sec. 3
Supply Voltage (VIN) operating VIN 2.3 30 V 3
Junction Temperature operating TJ -40 125 °C 3
Package Thermal Resistance, junction-to-ambient (SOIC) θJA 63 °C/W SOIC; PC board mounted (Note 4) 3

CAD (KiCad official)

  • Symbol: MIC5236-5.0YM-TR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mic5236-5-0ym-etched.step / mic5236-5-0ym-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic5236-5-0ym.step / mic5236-5-0ym.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (12 pp, sha256 dab9c0775d086119, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF