main
Ray
Publish 0.1.0
ef0b67d
MIC5231-3.0YM5-TR
Microchip Tech · Linear Voltage Regulators (LDO) · SOT-23-5
MIC5231-3.0YM5-TR from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Active-high enable input: logic high (VEN ≥ 1.4V) turns the regulator on and logic low (VEN ≤ 0.18V) shuts it down, and the pin must not be left floating. |
| 2 | GND | power_in | Ground reference pin for the regulator. |
| 3 | IN | power_in | Supply input, specified for a supply voltage of 3.5V to 12V in the operating ratings. |
| 4 | OUT | power_out | Regulated output, fixed at 3.0V for the MIC5231-3.0 variant, with 10mA output drive. |
| 5 | NC | unconnected | Not internally connected. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | VOUT | -2 | 2 | % | variation from nominal VOUT | 3 | |
| Output Voltage Accuracy | VOUT | -3 | 3 | % | variation from nominal VOUT; bold values, -40°C≤TJ≤+125°C | 3 | |
| Output Voltage Temperature Coefficient | ∆VOUT/∆T | 250 | ppm/°C | Note 5 | 3 | ||
| Line Regulation | ∆VOUT/VOUT | 0.2 | 0.25 | % | VIN = 6V to 12V | 3 | |
| Load Regulation | 0.2 | 1 | % | IL = 10µA to 10mA, Note 6 | 3 | ||
| Dropout Voltage | VDO | 150 | 300 | mV | IL = 10mA | 3 | |
| Ground Pin Current | IQ | 0.65 | 3 | µA | VIN = 6V, IL = 10mA | 3 | |
| Ground Pin Current | IQ | 1.1 | 4 | µA | VIN = 12V, IL = 10mA | 3 | |
| Enable Input Voltage (logic low) | VENL | 0.18 | V | VEN = logic low (regulator off) | 3 | ||
| Enable Input Voltage (logic high) | 1.4 | V | VEN = logic high (regulator on) | 3 | |||
| Enable Input Current (logic low) | IENL | 1 | nA | VENL ≤ 0.18V (regulator off) | 3 | ||
| Enable Input Current (logic high) | IENH | 1 | nA | VENH ≥ 1.4V (regulator on) | 3 | ||
| Supply Voltage (operating) | VIN | 3.5 | 12 | V | 3 | ||
| Ambient Temperature (operating) | TA | -40 | 85 | °C | 3 | ||
| Junction Temperature (operating) | TJ | -40 | 125 | °C | 3 | ||
| Supply Voltage (absolute maximum) | VIN | -0.6 | 14 | V | 3 | ||
| Lead Temperature | 260 | °C | soldering, 5 sec | 3 | |||
| Storage Temperature | Ts | -60 | 150 | °C | 3 | ||
| ESD Rating | 2 | kV | 3 | ||||
| Dropout Voltage | VDO | 15 | mV | IL = 1mA | 3 | ||
| Ripple Rejection | PSRR | 50 | dB | f = 100Hz, IL = 100µA | 3 | ||
| Thermal Resistance, Junction-to-Ambient | θJA | 235 | °C/W | mounted to a standard PC board | 3 | ||
| Thermal Resistance, Junction-to-Case | θJC | 130 | °C/W | 3 |
CAD (KiCad official)
- Symbol:
MIC5231-3.0YM5-TR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mic5231-3-0ym5-tr-etched.step/mic5231-3-0ym5-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic5231-3-0ym5-tr.step/mic5231-3-0ym5-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (7 pp, sha256
391edd09468638a8, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MIC5231-3.0YM5-TR
**Microchip Tech** · Linear Voltage Regulators (LDO) · SOT-23-5
MIC5231-3.0YM5-TR from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Active-high enable input: logic high (VEN ≥ 1.4V) turns the regulator on and logic low (VEN ≤ 0.18V) shuts it down, and the pin must not be left floating. |
| 2 | GND | power_in | Ground reference pin for the regulator. |
| 3 | IN | power_in | Supply input, specified for a supply voltage of 3.5V to 12V in the operating ratings. |
| 4 | OUT | power_out | Regulated output, fixed at 3.0V for the MIC5231-3.0 variant, with 10mA output drive. |
| 5 | NC | unconnected | Not internally connected. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | VOUT | -2 | | 2 | % | variation from nominal VOUT | 3 |
| Output Voltage Accuracy | VOUT | -3 | | 3 | % | variation from nominal VOUT; bold values, -40°C≤TJ≤+125°C | 3 |
| Output Voltage Temperature Coefficient | ∆VOUT/∆T | | | 250 | ppm/°C | Note 5 | 3 |
| Line Regulation | ∆VOUT/VOUT | | 0.2 | 0.25 | % | VIN = 6V to 12V | 3 |
| Load Regulation | | | 0.2 | 1 | % | IL = 10µA to 10mA, Note 6 | 3 |
| Dropout Voltage | VDO | | 150 | 300 | mV | IL = 10mA | 3 |
| Ground Pin Current | IQ | | 0.65 | 3 | µA | VIN = 6V, IL = 10mA | 3 |
| Ground Pin Current | IQ | | 1.1 | 4 | µA | VIN = 12V, IL = 10mA | 3 |
| Enable Input Voltage (logic low) | VENL | | | 0.18 | V | VEN = logic low (regulator off) | 3 |
| Enable Input Voltage (logic high) | | 1.4 | | | V | VEN = logic high (regulator on) | 3 |
| Enable Input Current (logic low) | IENL | | | 1 | nA | VENL ≤ 0.18V (regulator off) | 3 |
| Enable Input Current (logic high) | IENH | | | 1 | nA | VENH ≥ 1.4V (regulator on) | 3 |
| Supply Voltage (operating) | VIN | 3.5 | | 12 | V | | 3 |
| Ambient Temperature (operating) | TA | -40 | | 85 | °C | | 3 |
| Junction Temperature (operating) | TJ | -40 | | 125 | °C | | 3 |
| Supply Voltage (absolute maximum) | VIN | -0.6 | | 14 | V | | 3 |
| Lead Temperature | | | | 260 | °C | soldering, 5 sec | 3 |
| Storage Temperature | Ts | -60 | | 150 | °C | | 3 |
| ESD Rating | | | | 2 | kV | | 3 |
| Dropout Voltage | VDO | | 15 | | mV | IL = 1mA | 3 |
| Ripple Rejection | PSRR | | 50 | | dB | f = 100Hz, IL = 100µA | 3 |
| Thermal Resistance, Junction-to-Ambient | θJA | | 235 | | °C/W | mounted to a standard PC board | 3 |
| Thermal Resistance, Junction-to-Case | θJC | | 130 | | °C/W | | 3 |
## CAD (KiCad official)
- Symbol: `MIC5231-3.0YM5-TR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `mic5231-3-0ym5-tr-etched.step` / `mic5231-3-0ym5-tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mic5231-3-0ym5-tr.step` / `mic5231-3-0ym5-tr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mic5231-3-0ym5-tr-datasheet.pdf) (7 pp, sha256 `391edd09468638a8`, retrieved 2026-11-02, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mic5231-3-0ym5-tr-datasheet.pdf)