main
Ray Publish 0.1.0 e523258

MIC5219-3.3YMM

Microchip Tech · Linear Voltage Regulators (LDO) · MSOP-8

MIC5219-3.3YMM from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Enable input, CMOS-compatible control: logic-high enables the regulator, logic-low or open = shutdown (forcing EN above 2V enables it).
2 IN power_in Supply input; a 1 µF capacitor to GND is advised if there is more than 10 inches of wire to the AC filter capacitor or if a battery is the source.
3 OUT power_out Regulator output (3.3V fixed for this part); requires an output capacitor to GND, 1 µF minimum without CBYP or 2.2 µF minimum with a 470 pF CBYP.
4 BYP passive Reference bypass: connect an external 470 pF capacitor to GND to reduce output noise; may be left open.
5 GND power_in Ground; MSOP-8 pins 5 through 8 are internally connected.
6 GND power_in Ground; MSOP-8 pins 5 through 8 are internally connected.
7 GND power_in Ground; MSOP-8 pins 5 through 8 are internally connected.
8 GND power_in Ground; MSOP-8 pins 5 through 8 are internally connected.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-8
Category Power Management
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Variation from Nominal VOUT -1 1 % TJ = +25°C 5
Output Voltage Variation from Nominal VOUT -2 2 % -40°C ≤ TJ ≤ +125°C 5
Line Regulation ΔVOUT/VOUT 0.009 0.05 %/V VIN = VOUT + 1V to 12V 5
Line Regulation (full temp) ΔVOUT/VOUT 0.1 %/V VIN = VOUT + 1V to 12V, -40°C ≤ TJ ≤ +125°C 5
Load Regulation ΔVOUT/VOUT 0.05 0.5 % IOUT = 100 µA to 500 mA, Note 2 5
Load Regulation (full temp) ΔVOUT/VOUT 0.7 % IOUT = 100 µA to 500 mA, Note 2, -40°C ≤ TJ ≤ +125°C 5
Dropout Voltage VIN, VOUT 10 60 mV IOUT = 100 μA 6
Dropout Voltage (full temp) VIN, VOUT 80 mV IOUT = 100 μA, -40°C ≤ TJ ≤ +125°C 6
Dropout Voltage VIN, VOUT 115 175 mV IOUT = 50 mA 6
Dropout Voltage (full temp) VIN, VOUT 250 mV IOUT = 50 mA, -40°C ≤ TJ ≤ +125°C 6
Dropout Voltage VIN, VOUT 175 300 mV IOUT = 150 mA 6
Dropout Voltage (full temp) VIN, VOUT 400 mV IOUT = 150 mA, -40°C ≤ TJ ≤ +125°C 6
Dropout Voltage VIN, VOUT 350 500 mV IOUT = 500 mA 6
Dropout Voltage (full temp) VIN, VOUT 600 mV IOUT = 500 mA, -40°C ≤ TJ ≤ +125°C 6
Ground Pin Current IGND 80 130 μA VEN ≥ 3.0V, IOUT = 100 μA 6
Ground Pin Current (full temp) IGND 170 μA VEN ≥ 3.0V, IOUT = 100 μA, -40°C ≤ TJ ≤ +125°C 6
Ground Pin Current IGND 350 650 μA VEN ≥ 3.0V, IOUT = 50 mA 6
Ground Pin Current (full temp) IGND 900 μA VEN ≥ 3.0V, IOUT = 50 mA, -40°C ≤ TJ ≤ +125°C 6
Ground Pin Current IGND 1.8 2.5 mA VEN ≥ 3.0V, IOUT = 150 mA 6
Ground Pin Current (full temp) IGND 3 mA VEN ≥ 3.0V, IOUT = 150 mA, -40°C ≤ TJ ≤ +125°C 6
Ground Pin Current IGND 12 20 mA VEN ≥ 3.0V, IOUT = 500 mA 6
Ground Pin Current (full temp) IGND 25 mA VEN ≥ 3.0V, IOUT = 500 mA, -40°C ≤ TJ ≤ +125°C 6
Ground Pin Quiescent Current 0.05 3 μA VEN ≤ 0.4V 6
Ground Pin Quiescent Current 0.1 8 μA VEN ≤ 0.18V 6
Current Limit ILIMIT 700 1000 mA VOUT = 0V 6
Enable Input Logic-Low Voltage VENL 0.4 V VEN = logic low (regulator shutdown) 7
Enable Input Logic-Low Voltage VENL 0.18 V VEN = logic low (regulator shutdown), full temperature 7
Enable Input Logic-High Voltage VENH 2 V VEN = logic high (regulator enabled) 7
Enable Input Current IENL 0.01 -1 μA VENL ≤ 0.4V 7
Enable Input Current IENL 0.01 -2 μA VENL ≤ 0.18V 7
Enable Input Current IENH 2 5 20 μA VENH ≥ 2.0V 7
Enable Input Current (full temp) IENH 25 μA VENH ≥ 2.0V, -40°C ≤ TJ ≤ +125°C 7
Supply Input Voltage (absolute maximum) VIN -20 20 V 5
Supply Input Voltage (operating) VIN 2.5 12 V 5
Enable Input Voltage (operating) VEN 0 V 0V to VIN 5
Operating Ambient Temperature Range TA -40 125 °C 8
Maximum Junction Temperature Range TJ -40 125 °C 8
Storage Temperature Range TS -65 150 °C 8
Lead Temperature 260 °C Soldering, 5 sec. 8
Thermal Resistance, MSOP-8Ld θJA 160 °C/W Minimum footprint area. 8
Thermal Resistance MSOP-8, junction-to-case θJC 30 °C/W Table 4-1 13
Thermal Resistance MSOP-8, 1" square 2 oz. copper θJA 70 °C/W 1" Square 2 oz. Copper 13
Output Voltage Temperature Coefficient ΔVOUT/ΔT 40 ppm/°C Note 1 5
Ripple Rejection PSRR 75 dB f = 120 Hz 6
Thermal Regulation ΔVOUT/ΔPD 0.05 %/W Note 6 6
Output Noise eno 500 nV/√Hz IOUT = 50 mA, COUT = 2.2 μF, CBYP = 0 6
Output Noise eno 300 nV/√Hz IOUT = 50 mA, COUT = 2.2 μF, CBYP = 470 pF 6

CAD (KiCad official)

  • Symbol: MIC5219-3.3YMM
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: mic5219-3-3ymm-etched.step / mic5219-3-3ymm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic5219-3-3ymm.step / mic5219-3-3ymm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (32 pp, sha256 75b54e281b470424, retrieved 2026-10-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF