main
Ray
Publish 0.1.0
ebc7149
MIC5211-LXYM6-TR
Microchip Tech · Linear Voltage Regulators (LDO) · SOT-23-6
MIC5211-LXYM6-TR from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ENA | input | Enable/Shutdown A is a CMOS-compatible input: logic high enables regulator A, and logic low or open shuts it down. |
| 2 | GND | power_in | Ground pin for the device. |
| 3 | ENB | input | Enable/Shutdown B is a CMOS-compatible input: logic high enables regulator B, and logic low or open shuts it down. |
| 4 | OUTB | power_out | Regulator Output B; the datasheet gives no further limit for this pin on this page. |
| 5 | IN | power_in | Supply Input for both regulators; the operating range is 2.5V to 16V per the Operating Ratings on page 3. |
| 6 | OUTA | power_out | Regulator Output A; the datasheet gives no further limit for this pin on this page. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage variation from nominal VOUT (accuracy) | VO | -3 | 3 | % | VIN = VOUT + 1V; IL = 1mA; CL = 0.1µF; VEN ≥ 2.0V; TJ = 25°C; unless noted (table header) | 3 | |
| Accuracy (wider limit, bold values -40°C to +125°C per table header) | VO | -4 | 4 | % | Full temperature range per table header (bold); VIN = VOUT + 1V; IL = 1mA; CL = 0.1µF; VEN ≥ 2.0V | 3 | |
| Line regulation | ΔVO/VO | 0.008 | 0.3 | % | VIN = VOUT +1V to 16V | 3 | |
| Line regulation (second max value) | ΔVO/VO | 0.5 | % | VIN = VOUT +1V to 16V | 3 | ||
| Load regulation | ΔVO/VO | 0.08 | 0.3 | % | IL = 0.1mA to 50mA, Note 6 | 3 | |
| Load regulation (second max value) | ΔVO/VO | 0.5 | % | IL = 0.1mA to 50mA, Note 6 | 3 | ||
| Dropout voltage | VIN, VO | 200 | 450 | mV | IL = 20mA; Note 7 | 3 | |
| Dropout voltage | VIN, VO | 250 | 500 | mV | IL = 50mA; Note 7 | 3 | |
| Quiescent current (shutdown) | IQ | 0.01 | 10 | µA | VEN ≤ 0.4V (shutdown) | 3 | |
| Ground pin current (active) | IGND | 225 | 450 | µA | IL = 20mA (active); Note 8 | 3 | |
| Ground pin current (active) | IGND | 750 | 1200 | µA | IL = 50mA (active) | 3 | |
| Current limit | ILIMIT | 140 | 250 | mA | VOUT = 0V | 3 | |
| Enable input voltage, logic low (off) | VIL | 0.6 | V | logic low (off) | 3 | ||
| Enable input voltage, logic high (on) | VIH | 2 | V | logic high (on) | 3 | ||
| Enable input current (low) | IIL | 0.01 | 1 | µA | VIL ≤ 0.6V | 3 | |
| Enable input current (high) | IIH | 3 | 50 | µA | VIH ≥ 2.0V | 3 | |
| Output voltage temperature coefficient | ΔVO/ΔT | 50 | 200 | ppm/°C | Note 5 (worst-case change over full temperature range) | 3 | |
| Supply input voltage (absolute maximum) | VIN | -20 | 20 | V | 3 | ||
| Enable input voltage (absolute maximum) | VEN | -20 | 20 | V | 3 | ||
| Storage temperature range | TSTG | -60 | 150 | °C | 3 | ||
| Lead temperature (soldering, 5 sec.) | 260 | °C | Soldering, 5 sec. | 3 | |||
| Supply input voltage (operating) | VIN | 2.5 | 16 | V | 3 | ||
| Enable input voltage (operating) | VEN | 0 | 16 | V | 3 | ||
| Junction temperature (operating) | TJ | -40 | 125 | °C | Except 1.8V variant (applies to this 3.3V/5.0V part) | 3 | |
| Junction-to-ambient thermal resistance | θJA | 220 | °C/W | SOT-23-6 mounted on PCB, minimum footprint (Note 4) | 3 |
CAD (KiCad official)
- Symbol:
MIC5211-LXYM6-TR - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
mic5211-lxym6-tr-etched.step/mic5211-lxym6-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic5211-lxym6-tr.step/mic5211-lxym6-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (9 pp, sha256
d37d89788bfae58d, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MIC5211-LXYM6-TR
**Microchip Tech** · Linear Voltage Regulators (LDO) · SOT-23-6
MIC5211-LXYM6-TR from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ENA | input | Enable/Shutdown A is a CMOS-compatible input: logic high enables regulator A, and logic low or open shuts it down. |
| 2 | GND | power_in | Ground pin for the device. |
| 3 | ENB | input | Enable/Shutdown B is a CMOS-compatible input: logic high enables regulator B, and logic low or open shuts it down. |
| 4 | OUTB | power_out | Regulator Output B; the datasheet gives no further limit for this pin on this page. |
| 5 | IN | power_in | Supply Input for both regulators; the operating range is 2.5V to 16V per the Operating Ratings on page 3. |
| 6 | OUTA | power_out | Regulator Output A; the datasheet gives no further limit for this pin on this page. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage variation from nominal VOUT (accuracy) | VO | -3 | | 3 | % | VIN = VOUT + 1V; IL = 1mA; CL = 0.1µF; VEN ≥ 2.0V; TJ = 25°C; unless noted (table header) | 3 |
| Accuracy (wider limit, bold values -40°C to +125°C per table header) | VO | -4 | | 4 | % | Full temperature range per table header (bold); VIN = VOUT + 1V; IL = 1mA; CL = 0.1µF; VEN ≥ 2.0V | 3 |
| Line regulation | ΔVO/VO | | 0.008 | 0.3 | % | VIN = VOUT +1V to 16V | 3 |
| Line regulation (second max value) | ΔVO/VO | | | 0.5 | % | VIN = VOUT +1V to 16V | 3 |
| Load regulation | ΔVO/VO | | 0.08 | 0.3 | % | IL = 0.1mA to 50mA, Note 6 | 3 |
| Load regulation (second max value) | ΔVO/VO | | | 0.5 | % | IL = 0.1mA to 50mA, Note 6 | 3 |
| Dropout voltage | VIN, VO | | 200 | 450 | mV | IL = 20mA; Note 7 | 3 |
| Dropout voltage | VIN, VO | | 250 | 500 | mV | IL = 50mA; Note 7 | 3 |
| Quiescent current (shutdown) | IQ | | 0.01 | 10 | µA | VEN ≤ 0.4V (shutdown) | 3 |
| Ground pin current (active) | IGND | | 225 | 450 | µA | IL = 20mA (active); Note 8 | 3 |
| Ground pin current (active) | IGND | | 750 | 1200 | µA | IL = 50mA (active) | 3 |
| Current limit | ILIMIT | | 140 | 250 | mA | VOUT = 0V | 3 |
| Enable input voltage, logic low (off) | VIL | | | 0.6 | V | logic low (off) | 3 |
| Enable input voltage, logic high (on) | VIH | 2 | | | V | logic high (on) | 3 |
| Enable input current (low) | IIL | | 0.01 | 1 | µA | VIL ≤ 0.6V | 3 |
| Enable input current (high) | IIH | | 3 | 50 | µA | VIH ≥ 2.0V | 3 |
| Output voltage temperature coefficient | ΔVO/ΔT | | 50 | 200 | ppm/°C | Note 5 (worst-case change over full temperature range) | 3 |
| Supply input voltage (absolute maximum) | VIN | -20 | | 20 | V | | 3 |
| Enable input voltage (absolute maximum) | VEN | -20 | | 20 | V | | 3 |
| Storage temperature range | TSTG | -60 | | 150 | °C | | 3 |
| Lead temperature (soldering, 5 sec.) | | | | 260 | °C | Soldering, 5 sec. | 3 |
| Supply input voltage (operating) | VIN | 2.5 | | 16 | V | | 3 |
| Enable input voltage (operating) | VEN | 0 | | 16 | V | | 3 |
| Junction temperature (operating) | TJ | -40 | | 125 | °C | Except 1.8V variant (applies to this 3.3V/5.0V part) | 3 |
| Junction-to-ambient thermal resistance | θJA | | 220 | | °C/W | SOT-23-6 mounted on PCB, minimum footprint (Note 4) | 3 |
## CAD (KiCad official)
- Symbol: `MIC5211-LXYM6-TR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `mic5211-lxym6-tr-etched.step` / `mic5211-lxym6-tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mic5211-lxym6-tr.step` / `mic5211-lxym6-tr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mic5211-lxym6-tr-datasheet.pdf) (9 pp, sha256 `d37d89788bfae58d`, retrieved 2026-10-31, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mic5211-lxym6-tr-datasheet.pdf)