component
MIC5203-3.3YM5-TR
Public Made by Adomby adom
Microchip Tech Linear Voltage Regulators (LDO), SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
MIC5203-3.3YM5-TR
Microchip Tech · Linear Voltage Regulators (LDO) · SOT-23-5
MIC5203-3.3YM5-TR from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Supply input; operating input voltage range is 2.5V to 16V. |
| 2 | GND | power_in | Ground. |
| 3 | EN | input | Enable input, TTL/CMOS compatible: logic high (above 2.0V) = enabled; logic low (below 0.6V) or open = shutdown. |
| 4 | NC | unconnected | Not internally connected. |
| 5 | OUT | power_out | Regulator output; typically requires only 0.47µF of output capacitance for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy | VO | -3 | 3 | % | TJ = 25°C, VIN = VOUT+1V, IL = 1mA | 4 | |
| Output voltage accuracy (full temp) | VO | -4 | 4 | % | -40°C ≤ TJ ≤ +125°C | 4 | |
| Output voltage temperature coefficient | ∆VO/∆T | 50 | 200 | ppm/°C | Note 4 | 4 | |
| Line regulation | ∆VO/VO | 0.008 | 0.3 | % | VIN = VOUT + 1V to 16V | 4 | |
| Line regulation (full temp) | ∆VO/VO | 0.5 | % | VIN = VOUT + 1V to 16V, -40°C ≤ TJ ≤ +125°C | 4 | ||
| Load regulation | ∆VO/VO | 0.08 | 0.3 | % | IL = 0.1mA to 80mA | 4 | |
| Load regulation (full temp) | ∆VO/VO | 0.5 | % | IL = 0.1mA to 80mA, -40°C ≤ TJ ≤ +125°C | 4 | ||
| Dropout voltage | ∆VO, VO | 200 | 350 | mV | IL = 20mA | 4 | |
| Dropout voltage | ∆VO, VO | 300 | 600 | mV | IL = 80mA | 4 | |
| Dropout voltage | ∆VO, VO | 20 | mV | IL = 100 μA | 4 | ||
| Dropout voltage | ∆VO, VO | 250 | mV | IL = 50mA | 4 | ||
| Quiescent current (shutdown) | IQ | 0.01 | 10 | μA | VEN ≤ 0.4V (shutdown) | 4 | |
| Ground pin current | IGND | 225 | 750 | μA | IL = 20mA, VEN ≥ 2.0V (active) | 4 | |
| Ground pin current | IGND | 1800 | 3000 | μA | IL = 80mA, VEN ≥ 2.0V (active) | 4 | |
| Ground pin current | IGND | 180 | μA | IL = 100 μA, VEN ≥ 2.0V (active) | 4 | ||
| Ground pin current | IGND | 850 | μA | IL = 50mA, VEN ≥ 2.0V (active) | 4 | ||
| Ground pin current at dropout | IGNDDO | 200 | 300 | μA | VIN = VOUT(nominal), 0.5V | 4 | |
| Current limit | ILIMIT | 180 | 250 | mA | VOUT = 0V | 4 | |
| Thermal regulation | ∆VO/∆PD | 0.05 | %/W | Note 8 | 4 | ||
| Enable logic low (off) | VIL | 0.6 | V | Logic low (off) | 5 | ||
| Enable logic high (on) | VIH | 2 | V | Logic high (on) | 5 | ||
| Enable input current | IIL | 0.01 | 1 | μA | VIL ≤ 0.6V | 5 | |
| Enable input current | IIH | 15 | 50 | μA | VIH ≥ 2.0V | 5 | |
| Supply voltage | VIN | -20 | 20 | V | 4 | ||
| Enable input voltage | VEN | -20 | 20 | V | 4 | ||
| Storage temperature | Ts | -60 | 150 | °C | 4 | ||
| Lead temperature | 260 | °C | soldering | 4 | |||
| Input voltage | VIN | 2.5 | 16 | V | Operating ratings | 4 | |
| Enable input voltage | VEN | 0 | V | 0V to VIN | 4 | ||
| Junction temperature range | TJ | -40 | 125 | °C | Operating ratings | 4 | |
| Thermal resistance junction to ambient | θJA | 220 | °C/W | SOT-23-5 mounted on a printed circuit board | 5 |
CAD (KiCad official)
- Symbol:
MIC5203-3.3YM5-TR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mic5203-3-3ym5-tr-etched.step/mic5203-3-3ym5-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic5203-3-3ym5-tr.step/mic5203-3-3ym5-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (10 pp, sha256
947d38a555d8e95a, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MIC5203-3.3YM5-TR
**Microchip Tech** · Linear Voltage Regulators (LDO) · SOT-23-5
MIC5203-3.3YM5-TR from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Supply input; operating input voltage range is 2.5V to 16V. |
| 2 | GND | power_in | Ground. |
| 3 | EN | input | Enable input, TTL/CMOS compatible: logic high (above 2.0V) = enabled; logic low (below 0.6V) or open = shutdown. |
| 4 | NC | unconnected | Not internally connected. |
| 5 | OUT | power_out | Regulator output; typically requires only 0.47µF of output capacitance for stability. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Power Management ICs |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy | VO | -3 | | 3 | % | TJ = 25°C, VIN = VOUT+1V, IL = 1mA | 4 |
| Output voltage accuracy (full temp) | VO | -4 | | 4 | % | -40°C ≤ TJ ≤ +125°C | 4 |
| Output voltage temperature coefficient | ∆VO/∆T | | 50 | 200 | ppm/°C | Note 4 | 4 |
| Line regulation | ∆VO/VO | | 0.008 | 0.3 | % | VIN = VOUT + 1V to 16V | 4 |
| Line regulation (full temp) | ∆VO/VO | | | 0.5 | % | VIN = VOUT + 1V to 16V, -40°C ≤ TJ ≤ +125°C | 4 |
| Load regulation | ∆VO/VO | | 0.08 | 0.3 | % | IL = 0.1mA to 80mA | 4 |
| Load regulation (full temp) | ∆VO/VO | | | 0.5 | % | IL = 0.1mA to 80mA, -40°C ≤ TJ ≤ +125°C | 4 |
| Dropout voltage | ∆VO, VO | | 200 | 350 | mV | IL = 20mA | 4 |
| Dropout voltage | ∆VO, VO | | 300 | 600 | mV | IL = 80mA | 4 |
| Dropout voltage | ∆VO, VO | | 20 | | mV | IL = 100 μA | 4 |
| Dropout voltage | ∆VO, VO | | 250 | | mV | IL = 50mA | 4 |
| Quiescent current (shutdown) | IQ | | 0.01 | 10 | μA | VEN ≤ 0.4V (shutdown) | 4 |
| Ground pin current | IGND | | 225 | 750 | μA | IL = 20mA, VEN ≥ 2.0V (active) | 4 |
| Ground pin current | IGND | | 1800 | 3000 | μA | IL = 80mA, VEN ≥ 2.0V (active) | 4 |
| Ground pin current | IGND | | 180 | | μA | IL = 100 μA, VEN ≥ 2.0V (active) | 4 |
| Ground pin current | IGND | | 850 | | μA | IL = 50mA, VEN ≥ 2.0V (active) | 4 |
| Ground pin current at dropout | IGNDDO | | 200 | 300 | μA | VIN = VOUT(nominal), 0.5V | 4 |
| Current limit | ILIMIT | | 180 | 250 | mA | VOUT = 0V | 4 |
| Thermal regulation | ∆VO/∆PD | | 0.05 | | %/W | Note 8 | 4 |
| Enable logic low (off) | VIL | | | 0.6 | V | Logic low (off) | 5 |
| Enable logic high (on) | VIH | 2 | | | V | Logic high (on) | 5 |
| Enable input current | IIL | | 0.01 | 1 | μA | VIL ≤ 0.6V | 5 |
| Enable input current | IIH | | 15 | 50 | μA | VIH ≥ 2.0V | 5 |
| Supply voltage | VIN | -20 | | 20 | V | | 4 |
| Enable input voltage | VEN | -20 | | 20 | V | | 4 |
| Storage temperature | Ts | -60 | | 150 | °C | | 4 |
| Lead temperature | | | | 260 | °C | soldering | 4 |
| Input voltage | VIN | 2.5 | | 16 | V | Operating ratings | 4 |
| Enable input voltage | VEN | 0 | | | V | 0V to VIN | 4 |
| Junction temperature range | TJ | -40 | | 125 | °C | Operating ratings | 4 |
| Thermal resistance junction to ambient | θJA | | 220 | | °C/W | SOT-23-5 mounted on a printed circuit board | 5 |
## CAD (KiCad official)
- Symbol: `MIC5203-3.3YM5-TR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `mic5203-3-3ym5-tr-etched.step` / `mic5203-3-3ym5-tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mic5203-3-3ym5-tr.step` / `mic5203-3-3ym5-tr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mic5203-3-3ym5-tr-datasheet.pdf) (10 pp, sha256 `947d38a555d8e95a`, retrieved 2026-10-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mic5203-3-3ym5-tr-datasheet.pdf)