main
History Download
Ray Publish 0.1.0 e58472e

MIC5201YM

Microchip Tech · Power Management Specialized - PMIC · SOIC-8

MIC5201YM from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Regulated output; a 1 µF capacitor to ground is recommended for stability (3.3 µF used in the adjustable application circuit).
2 ADJ input Feedback input (adjustable version only) that sets VOUT = 1.242 V × (1 + R2/R1); a capacitor from ADJ to GND reduces output noise.
3 GND power_in Ground.
4 NC unconnected Not internally connected; connect to ground plane for lowest thermal resistance.
5 EN input Enable input, high = enable and low or open = off/disable, with VEN of 0 V to VIN (VIH ≥ 2.0 V, VIL ≤ 0.5 V).
6 NC unconnected Not internally connected; connect to ground plane for lowest thermal resistance.
7 NC unconnected Not internally connected; connect to ground plane for lowest thermal resistance.
8 IN power_in Unregulated supply input, +2.5 V to +16 V operating for the adjustable version (absolute maximum -20 V to +20 V).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Accuracy VO -2 2 % Variation from specified VOUT 4
Output Voltage Temperature Coefficient ΔVO/ΔT 40 150 ppm/°C Note 2 4
Line Regulation, Adjustable (25°C) ΔVO/VO 0.004 0.2 % VIN = VOUT + 1V to 16V 4
Line Regulation, Adjustable (full temp) ΔVO/VO 0.4 % VIN = VOUT + 1V to 16V 4
Load Regulation (25°C) ΔVO/VO 0.04 0.3 % IL = 0.1 mA to 150 mA, Note 3 4
Load Regulation (full temp) ΔVO/VO 0.4 % IL = 0.1 mA to 150 mA, Note 3 4
Dropout Voltage VIN, VO 270 400 mV IL = 150 mA 4
Ground Pin Current IGND 270 400 µA IL = 20 mA 4
Ground Pin Current IGND 1000 2000 µA IL = 100 mA 4
Ground Pin Current at Dropout IGDNDO 270 330 µA VIN = 0.5V less than specified VOUT, IL = 100 µA, Note 5 4
Current Limit ILIMIT 280 500 mA VOUT = 0V 4
Enable Input Voltage Level Low VIL 0.5 V Logic low (off) 4
Enable Input Voltage Level High VIH 2 V Logic high (on) 4
Enable Input Current Low IIL 0.01 1 µA VIL ≤ 0.5V 4
Enable Input Current High IIH 15 70 µA VIH ≥ 2.0V 4
Reference Voltage (25°C) VREF 1.223 1.242 1.255 V 5
Reference Voltage (full temp) VREF 1.217 1.267 V 5
Dropout Voltage VIN, VO 17 mV IL = 100 µA, Note 7 4
Dropout Voltage VIN, VO 130 mV IL = 20 mA, Note 7 4
Dropout Voltage VIN, VO 180 mV IL = 50 mA, Note 7 4
Dropout Voltage VIN, VO 225 mV IL = 100 mA, Note 7 4
Quiescent Current IGND 0.01 µA VENABLE ≤ 0.5V (shutdown), Note 7 4
Ground Pin Current IGND 130 µA IL = 100 µA, Note 7 4
Ground Pin Current IGND 500 µA IL = 50 mA, Note 7 4
Ground Pin Current IGND 3000 µA IL = 150 mA, Note 7 4
Ripple Rejection PSRR 75 dB f = 100 Hz, IL = 1 mA, Note 7 4
Thermal Regulation ΔVO/ΔPD 0.05 %/W Note 6 4
Output Noise en 100 µV Note 7 4
Reference Voltage Temperature Coefficient ΔVREF/ΔT 20 ppm/°C Note 7 5
Supply Input Voltage (Adjustable) VIN -20 20 V 3
Enable Input Voltage (Adjustable) VEN -20 20 V 3
Supply Input Voltage (Adjustable) VIN 2.5 16 V Operating ratings 3
Enable Input Voltage VEN 0 V 0V to VIN 3
Junction Temperature Range TJ -40 85 °C 6
Lead Temperature 260 °C Soldering, 5 sec. 6
Thermal Resistance 8-Lead SOIC θJA 160 °C/W 6

CAD (KiCad official)

  • Symbol: MIC5201YM
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mic5201ym-etched.step / mic5201ym-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic5201ym.step / mic5201ym.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (24 pp, sha256 fe433b0f04e61ce2, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF