main
Ray
Publish 0.1.0
0a22ed2
MIC5201-3.3YM
Microchip Tech · Linear Voltage Regulators (LDO) · SOIC-8
MIC5201-3.3YM from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated output; a 1 µF capacitor from output to ground is recommended to prevent oscillations, with larger values improving transient response. |
| 2 | NC | unconnected | Not internally connected; connect to the ground plane for the lowest thermal resistance. |
| 3 | GND | power_in | Ground. |
| 4 | NC | unconnected | Not internally connected; connect to the ground plane for the lowest thermal resistance. |
| 5 | EN | input | Enable input: high (at least 2.0 V) enables the regulator, while low (at most 0.5 V) or open disables it; it may be tied to VIN if unused. |
| 6 | NC | unconnected | Not internally connected; connect to the ground plane for the lowest thermal resistance. |
| 7 | NC | unconnected | Not internally connected; connect to the ground plane for the lowest thermal resistance. |
| 8 | VIN | power_in | Unregulated supply input; the fixed-version operating range is +2.5 V to +26 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | VO | -2 | 2 | % | Variation from specified VOUT | 4 | |
| Output Voltage Temperature Coefficient | ΔVO/ΔT | 40 | 150 | ppm/°C | Note 2 | 4 | |
| Line Regulation, Fixed | ΔVO/VO | 0.004 | 0.2 | % | VIN = VOUT + 1V to 26V | 4 | |
| Line Regulation, Fixed (second line) | ΔVO/VO | 0.4 | % | VIN = VOUT + 1V to 26V | 4 | ||
| Load Regulation | ΔVO/VO | 0.04 | 0.3 | % | IL = 0.1 mA to 150 mA, Note 3 | 4 | |
| Load Regulation (second line) | ΔVO/VO | 0.4 | % | IL = 0.1 mA to 150 mA, Note 3 | 4 | ||
| Dropout Voltage | VIN, VO | 270 | 400 | mV | IL = 150 mA | 4 | |
| Ground Pin Current | IGND | 270 | 400 | µA | IL = 20 mA | 4 | |
| Ground Pin Current | IGND | 1000 | 2000 | µA | IL = 100 mA | 4 | |
| Ground Pin Current at Dropout | IGDNDO | 270 | 330 | µA | VIN = 0.5V less than specified VOUT, IL = 100 µA, Note 5 | 4 | |
| Current Limit | ILIMIT | 280 | 500 | mA | VOUT = 0V | 4 | |
| Input Voltage Level (logic low, off) | VIL | 0.5 | V | Logic low (off) | 4 | ||
| Input Voltage Level (logic high, on) | VIH | 2 | V | Logic high (on) | 4 | ||
| Enable Input Current (low) | IIL | 0.01 | 1 | µA | VIL ≤ 0.5V | 4 | |
| Enable Input Current (high) | IIH | 15 | 70 | µA | VIH ≥ 2.0V | 4 | |
| Junction Temperature Range | TJ | -40 | 85 | °C | 6 | ||
| Lead Temperature | 260 | °C | Soldering, 5 sec. | 6 | |||
| Supply Input Voltage (VIN) Fixed | VIN | -20 | 60 | V | 3 | ||
| Enable Input Voltage (VEN) Fixed | VEN | -20 | 60 | V | 3 | ||
| Supply Input Voltage (VIN) Fixed | VIN | 2.5 | 26 | V | 3 | ||
| Enable Input Voltage (VEN) | VEN | 0 | V | Upper limit printed as VIN | 3 | ||
| Thermal Resistance 8-Lead SOIC | θJA | 160 | °C/W | See Thermal Considerations Layout for more information. | 6 | ||
| Thermal Resistance, FR4 PCB | θJA | 160 | ºC/W | PCB dielectric FR4 | 13 | ||
| Thermal Resistance, Ceramic PCB | θJA | 120 | ºC/W | PCB dielectric Ceramic | 13 |
CAD (KiCad official)
- Symbol:
MIC5201-3.3YM - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mic5201-3-3ym-etched.step/mic5201-3-3ym-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic5201-3-3ym.step/mic5201-3-3ym.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (24 pp, sha256
fe433b0f04e61ce2, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MIC5201-3.3YM
**Microchip Tech** · Linear Voltage Regulators (LDO) · SOIC-8
MIC5201-3.3YM from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated output; a 1 µF capacitor from output to ground is recommended to prevent oscillations, with larger values improving transient response. |
| 2 | NC | unconnected | Not internally connected; connect to the ground plane for the lowest thermal resistance. |
| 3 | GND | power_in | Ground. |
| 4 | NC | unconnected | Not internally connected; connect to the ground plane for the lowest thermal resistance. |
| 5 | EN | input | Enable input: high (at least 2.0 V) enables the regulator, while low (at most 0.5 V) or open disables it; it may be tied to VIN if unused. |
| 6 | NC | unconnected | Not internally connected; connect to the ground plane for the lowest thermal resistance. |
| 7 | NC | unconnected | Not internally connected; connect to the ground plane for the lowest thermal resistance. |
| 8 | VIN | power_in | Unregulated supply input; the fixed-version operating range is +2.5 V to +26 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | VO | -2 | | 2 | % | Variation from specified VOUT | 4 |
| Output Voltage Temperature Coefficient | ΔVO/ΔT | | 40 | 150 | ppm/°C | Note 2 | 4 |
| Line Regulation, Fixed | ΔVO/VO | | 0.004 | 0.2 | % | VIN = VOUT + 1V to 26V | 4 |
| Line Regulation, Fixed (second line) | ΔVO/VO | | | 0.4 | % | VIN = VOUT + 1V to 26V | 4 |
| Load Regulation | ΔVO/VO | | 0.04 | 0.3 | % | IL = 0.1 mA to 150 mA, Note 3 | 4 |
| Load Regulation (second line) | ΔVO/VO | | | 0.4 | % | IL = 0.1 mA to 150 mA, Note 3 | 4 |
| Dropout Voltage | VIN, VO | | 270 | 400 | mV | IL = 150 mA | 4 |
| Ground Pin Current | IGND | | 270 | 400 | µA | IL = 20 mA | 4 |
| Ground Pin Current | IGND | | 1000 | 2000 | µA | IL = 100 mA | 4 |
| Ground Pin Current at Dropout | IGDNDO | | 270 | 330 | µA | VIN = 0.5V less than specified VOUT, IL = 100 µA, Note 5 | 4 |
| Current Limit | ILIMIT | | 280 | 500 | mA | VOUT = 0V | 4 |
| Input Voltage Level (logic low, off) | VIL | | | 0.5 | V | Logic low (off) | 4 |
| Input Voltage Level (logic high, on) | VIH | 2 | | | V | Logic high (on) | 4 |
| Enable Input Current (low) | IIL | | 0.01 | 1 | µA | VIL ≤ 0.5V | 4 |
| Enable Input Current (high) | IIH | | 15 | 70 | µA | VIH ≥ 2.0V | 4 |
| Junction Temperature Range | TJ | -40 | | 85 | °C | | 6 |
| Lead Temperature | | | | 260 | °C | Soldering, 5 sec. | 6 |
| Supply Input Voltage (VIN) Fixed | VIN | -20 | | 60 | V | | 3 |
| Enable Input Voltage (VEN) Fixed | VEN | -20 | | 60 | V | | 3 |
| Supply Input Voltage (VIN) Fixed | VIN | 2.5 | | 26 | V | | 3 |
| Enable Input Voltage (VEN) | VEN | 0 | | | V | Upper limit printed as VIN | 3 |
| Thermal Resistance 8-Lead SOIC | θJA | | 160 | | °C/W | See Thermal Considerations Layout for more information. | 6 |
| Thermal Resistance, FR4 PCB | θJA | | 160 | | ºC/W | PCB dielectric FR4 | 13 |
| Thermal Resistance, Ceramic PCB | θJA | | 120 | | ºC/W | PCB dielectric Ceramic | 13 |
## CAD (KiCad official)
- Symbol: `MIC5201-3.3YM`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `mic5201-3-3ym-etched.step` / `mic5201-3-3ym-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mic5201-3-3ym.step` / `mic5201-3-3ym.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mic5201-3-3ym-datasheet.pdf) (24 pp, sha256 `fe433b0f04e61ce2`, retrieved 2026-10-29, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mic5201-3-3ym-datasheet.pdf)