main
Ray
Publish 0.1.0
fdf35aa
MIC5021YM
Microchip Tech · Gate Drive ICs · SOIC-8
MIC5021YM from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply input from +12V to 36V that should be decoupled with a ≥ 10 μF capacitor. |
| 2 | INPUT | input | TTL-compatible input where logic high turns the external MOSFET on, and an internal pull-down returns an open pin to logic low. |
| 3 | CT | passive | Retry timing capacitor that sets the overcurrent retry off time: open gives about 20% duty cycle, a capacitor to ground gives about 20% to <1%, a pull-up resistor gives about 20% to about 75%, and ground holds shutdown on overcurrent. |
| 4 | GND | power_in | Circuit ground reference for the device. |
| 5 | SENSE+ | input | Current-sense comparator (+) input connected to the high side of the sense resistor or sense MOSFET sense lead, where a built-in offset with RSENSE sets the load overcurrent trip point. |
| 6 | SENSE- | input | Current-sense comparator (-) input connected to the low side of the sense resistor (usually the high side of the load). |
| 7 | GATE | output | Gate drive output for an external power MOSFET that limits VGS to 15V maximum to prevent gate-to-source damage and sources and sinks current. |
| 8 | VBOOST | passive | Charge pump boost capacitor pin; a bootstrap capacitor from VBOOST to the FET source supplies charge to quickly enhance the gate output during turn-on. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage, VDD | VDD | 40 | V | 3 | |||
| Input Voltage | VIN | -0.5 | 15 | V | 3 | ||
| Sense Differential Voltage | -6.5 | 6.5 | V | 3 | |||
| SENSE+ or SENSE- to GND | -0.5 | 36 | V | 3 | |||
| Timer Voltage | 5.5 | V | 3 | ||||
| VBOOST Capacitor | 0.01 | μF | 3 | ||||
| Supply Voltage, VDD (operating range) | VDD | 12 | 36 | V | 3 | ||
| DC Supply Current | 1.8 | 4 | mA | VDD = 12V, Input = 0V | 3 | ||
| DC Supply Current | 2.5 | 6 | mA | VDD = 36V, Input = 0V | 3 | ||
| DC Supply Current | 1.7 | 4 | mA | VDD = 12V, Input = 5V | 3 | ||
| Input Threshold | 0.8 | 1.4 | 2 | V | 3 | ||
| Input Pull-Down Current | 10 | 20 | 40 | μA | Input = 5V | 3 | |
| Current-Limit Threshold | 30 | 50 | 70 | mV | Note 1 | 3 | |
| Gate On Voltage | 16 | 18 | 21 | V | VDD = 12V (Note 2) | 3 | |
| Gate On Voltage | 46 | 50 | 52 | V | VDD = 36V (Note 2) | 3 | |
| Gate On-Time (Fixed) | tG(ON) | 2 | 6 | 10 | μs | Sense Differential 70 mV (Note 8) | 3 |
| Gate Off-Time (Adjustable) | tG(OFF) | 10 | 20 | 50 | μs | Sense Differential 70 mV, CT = 0 pF (Note 8) | 3 |
| Gate Turn-On Delay | tDLH | 500 | 1000 | ns | Note 3: Input switched from 0.8V (TTL low) to 2.0V (TTL high), time for gate transition from 0V to 2V | 3 | |
| Gate Rise Time | tR | 400 | 500 | ns | Note 4: Input switched from 0.8V (TTL low) to 2.0V (TTL high), time for gate transition from 2V to 17V | 3 | |
| Gate Turn-Off Delay | tDLH | 800 | 1500 | ns | Note 5: Input switched from 2.0V (TTL high) to 0.8V (TTL low), time for gate transition from 20V (gate on voltage) to 17V | 3 | |
| Gate Fall Time | tF | 400 | 500 | ns | Note 6: Input switched from 2.0V (TTL high) to 0.8V (TTL low), time for gate transition from 17V to 2V | 4 | |
| Max. Operating Frequency | fMAX | 100 | 150 | kHz | Note 7: Frequency where gate on voltage reduces to 17V with 50% input duty cycle | 4 | |
| Thermal Resistance, SOIC-8Ld | JA | -40 | 85 | °C | Maximum Ambient Temperature | 5 | |
| Input Hysteresis | 0.1 | V | 3 |
CAD (KiCad official)
- Symbol:
MIC5021YM - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mic5021ym-etched.step/mic5021ym-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic5021ym.step/mic5021ym.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (24 pp, sha256
5ae6f79012cacd77, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MIC5021YM
**Microchip Tech** · Gate Drive ICs · SOIC-8
MIC5021YM from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply input from +12V to 36V that should be decoupled with a ≥ 10 μF capacitor. |
| 2 | INPUT | input | TTL-compatible input where logic high turns the external MOSFET on, and an internal pull-down returns an open pin to logic low. |
| 3 | CT | passive | Retry timing capacitor that sets the overcurrent retry off time: open gives about 20% duty cycle, a capacitor to ground gives about 20% to <1%, a pull-up resistor gives about 20% to about 75%, and ground holds shutdown on overcurrent. |
| 4 | GND | power_in | Circuit ground reference for the device. |
| 5 | SENSE+ | input | Current-sense comparator (+) input connected to the high side of the sense resistor or sense MOSFET sense lead, where a built-in offset with RSENSE sets the load overcurrent trip point. |
| 6 | SENSE- | input | Current-sense comparator (-) input connected to the low side of the sense resistor (usually the high side of the load). |
| 7 | GATE | output | Gate drive output for an external power MOSFET that limits VGS to 15V maximum to prevent gate-to-source damage and sources and sinks current. |
| 8 | VBOOST | passive | Charge pump boost capacitor pin; a bootstrap capacitor from VBOOST to the FET source supplies charge to quickly enhance the gate output during turn-on. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage, VDD | VDD | | | 40 | V | | 3 |
| Input Voltage | VIN | -0.5 | | 15 | V | | 3 |
| Sense Differential Voltage | | -6.5 | | 6.5 | V | | 3 |
| SENSE+ or SENSE- to GND | | -0.5 | | 36 | V | | 3 |
| Timer Voltage | | | | 5.5 | V | | 3 |
| VBOOST Capacitor | | | | 0.01 | μF | | 3 |
| Supply Voltage, VDD (operating range) | VDD | 12 | | 36 | V | | 3 |
| DC Supply Current | | | 1.8 | 4 | mA | VDD = 12V, Input = 0V | 3 |
| DC Supply Current | | | 2.5 | 6 | mA | VDD = 36V, Input = 0V | 3 |
| DC Supply Current | | | 1.7 | 4 | mA | VDD = 12V, Input = 5V | 3 |
| Input Threshold | | 0.8 | 1.4 | 2 | V | | 3 |
| Input Pull-Down Current | | 10 | 20 | 40 | μA | Input = 5V | 3 |
| Current-Limit Threshold | | 30 | 50 | 70 | mV | Note 1 | 3 |
| Gate On Voltage | | 16 | 18 | 21 | V | VDD = 12V (Note 2) | 3 |
| Gate On Voltage | | 46 | 50 | 52 | V | VDD = 36V (Note 2) | 3 |
| Gate On-Time (Fixed) | tG(ON) | 2 | 6 | 10 | μs | Sense Differential 70 mV (Note 8) | 3 |
| Gate Off-Time (Adjustable) | tG(OFF) | 10 | 20 | 50 | μs | Sense Differential 70 mV, CT = 0 pF (Note 8) | 3 |
| Gate Turn-On Delay | tDLH | | 500 | 1000 | ns | Note 3: Input switched from 0.8V (TTL low) to 2.0V (TTL high), time for gate transition from 0V to 2V | 3 |
| Gate Rise Time | tR | | 400 | 500 | ns | Note 4: Input switched from 0.8V (TTL low) to 2.0V (TTL high), time for gate transition from 2V to 17V | 3 |
| Gate Turn-Off Delay | tDLH | | 800 | 1500 | ns | Note 5: Input switched from 2.0V (TTL high) to 0.8V (TTL low), time for gate transition from 20V (gate on voltage) to 17V | 3 |
| Gate Fall Time | tF | | 400 | 500 | ns | Note 6: Input switched from 2.0V (TTL high) to 0.8V (TTL low), time for gate transition from 17V to 2V | 4 |
| Max. Operating Frequency | fMAX | 100 | 150 | | kHz | Note 7: Frequency where gate on voltage reduces to 17V with 50% input duty cycle | 4 |
| Thermal Resistance, SOIC-8Ld | JA | -40 | | 85 | °C | Maximum Ambient Temperature | 5 |
| Input Hysteresis | | | 0.1 | | V | | 3 |
## CAD (KiCad official)
- Symbol: `MIC5021YM`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `mic5021ym-etched.step` / `mic5021ym-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mic5021ym.step` / `mic5021ym.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mic5021ym-datasheet.pdf) (24 pp, sha256 `5ae6f79012cacd77`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mic5021ym-datasheet.pdf)