MIC5013YM

{
  "slug": "mic5013ym",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Tech Pre-ordered Chips, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface ics",
    "mic5013ym",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mic5013ym.kicad_sym",
    "mic5013ym.kicad_mod",
    "mic5013ym.glb",
    "mic5013ym.step",
    "mic5013ym.lbr",
    "docs/hero.png",
    "docs/mic5013ym-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mic5013ym-hero.glb",
    "mic5013ym-hero.overlay.json",
    "mic5013ym-etched.glb"
  ],
  "component": {
    "mpn": "MIC5013YM",
    "manufacturer": "Microchip Tech",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Interface ICs",
    "subcategory": "Pre-ordered Chips",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/ea3e3dfb52d3b96663fa37cd9180fd53.pdf",
    "parts": {
      "symbol": "mic5013ym.kicad_sym",
      "footprint": "mic5013ym.kicad_mod",
      "model_3d": "mic5013ym-hero.glb",
      "model_3d_plain": "mic5013ym-etched.glb",
      "model_3d_step": "mic5013ym-etched.step",
      "model_3d_step_plain": "mic5013ym.step",
      "lbr": "mic5013ym.lbr"
    },
    "distributor_links": {
      "lcsc": "C1549385"
    },
    "distributor_check": {
      "checked_at": "2026-10-31T18:47:09Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "Input",
        "type": "input",
        "description": "Resets the current sense latch and turns on the power MOSFET when taken above the 3.5V typical threshold; requires <1µA to switch."
      },
      {
        "number": "2",
        "name": "Threshold",
        "type": "passive",
        "description": "Sets the current sense trip voltage via RTH to ground (3.3kΩ to 20kΩ); adding CTH raises the trip voltage at turn-on to 2V (10µF gives a 10ms time constant)."
      },
      {
        "number": "3",
        "name": "Sense",
        "type": "input",
        "description": "Current sense trips when VSENSE is VTRIP above VSOURCE; used with a shunt in the source of a 3-lead FET or a resistor RS in the sense lead of a current-sensing FET, and can safely swing to -10V."
      },
      {
        "number": "4",
        "name": "Source",
        "type": "passive",
        "description": "Reference for the current sense voltage on pin 3 and return for the gate clamp zener; connects to the load side of the shunt or the Kelvin lead of a current-sensing FET, and can safely swing to -10V (max 50mA into pin)."
      },
      {
        "number": "5",
        "name": "Gnd",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "6",
        "name": "Gate",
        "type": "output",
        "description": "Drives and clamps the gate of the power FET (absolute max -1V to 50V); clamped to approximately -0.7V by an internal diode when turning off inductive loads."
      },
      {
        "number": "7",
        "name": "V+",
        "type": "power_in",
        "description": "Supply pin, 7V to 32V for high side and 7V to 15V for low side (absolute max 36V); decouple with 10µF close to pins 7 and 5."
      },
      {
        "number": "8",
        "name": "Fault",
        "type": "output",
        "description": "Outputs protection circuit status when pin 1 is high: low indicates normal operation, high indicates current sense tripped (absolute max ±1mA)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin types for Threshold (2) and Source (4) chosen as passive; Sense (3) as input. The datasheet does"
        ],
        "pages_sent": 15,
        "cost_usd": 0.0786,
        "at": "2026-10-31T18:46:58"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/ea3e3dfb52d3b96663fa37cd9180fd53.pdf",
        "pages": 15,
        "sha256": "b77d0721bf9d38c6",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mic5013ym.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mic5013ym-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "6dfde6de02555bae2492d0cb706aa196d176cefda6cdc5b44211ea6cbd6d79ca",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}