component
MIC49150YMM-TR
Public Made by Adomby adom
Microchip Tech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMIC49150YMM-TR
Microchip Tech · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · MSOP-8
MIC49150YMM-TR from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN/ADJ | input | On the adjustable MIC49150YMM this pin is the ADJ feedback input, connected to the resistor divider; the resistor between VOUT and ADJ should not exceed 10kΩ, as larger values can cause instability. The EN enable function applies only to fixed-output versions. |
| 2 | VBIAS | power_in | Bias supply powering all circuitry except the output power device, specified at 3V to 6.5V, and must be at least 1.6V above VOUT. |
| 3 | VIN | power_in | Input supply to the output power device, specified at 1.4V to 6.5V. |
| 4 | VOUT | power_out | Regulator output. |
| 5 | GND | power_in | Ground; pins 5 through 8 are joined to the die attach paddle for thermal and electrical conduction. |
| 6 | GND | power_in | Ground; pins 5 through 8 are joined to the die attach paddle for thermal and electrical conduction. |
| 7 | GND | power_in | Ground; pins 5 through 8 are joined to the die attach paddle for thermal and electrical conduction. |
| 8 | GND | power_in | Ground; pins 5 through 8 are joined to the die attach paddle for thermal and electrical conduction. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VIN) | VIN | 8 | V | 3 | |||
| Bias Supply Voltage (VBIAS) | VBIAS | 8 | V | 3 | |||
| Enable Input Voltage (VEN) | VEN | 8 | V | 3 | |||
| ESD Rating | 4 | kV | Human body model, 1.5kΩ in series with 100pF | 3 | |||
| Supply Voltage (VIN) operating range | VIN | 1.4 | 6.5 | V | 3 | ||
| Bias Supply Voltage (VBIAS) operating range | VBIAS | 3 | 6.5 | V | 3 | ||
| Enable Input Voltage (VEN) operating range | VEN | 0 | 6.5 | V | 3 | ||
| Junction Temperature (TJ) | TJ | -40 | 125 | °C | 3 | ||
| Adjustable output voltage range | VOUT | 0.9 | 5 | V | Adjustable version | 11 | |
| Resistor between VOUT and ADJ pin | 10 | kΩ | Larger values can cause instability | 11 | |||
| Output Voltage Accuracy | -1 | 1 | % | At 25°C | 3 | ||
| Output Voltage Accuracy | -2 | 2 | % | Over temperature range | 3 | ||
| Line Regulation | -0.1 | 0.01 | 0.1 | %/V | VIN = VOUT +1V to 6.5V | 3 | |
| Load Regulation | 0.2 | 1 | % | IL = 0mA to 1.5A | 3 | ||
| Load Regulation | 1.5 | % | IL = 0mA to 1.5A | 3 | |||
| Dropout Voltage (VIN - VOUT) | 130 | 200 | mV | IL = 750mA | 3 | ||
| Dropout Voltage (VIN - VOUT) | 280 | 300 | mV | IL = 1.5A | 3 | ||
| Dropout Voltage (VIN - VOUT) | 400 | mV | IL = 750mA | 3 | |||
| Dropout Voltage (VIN - VOUT) | 500 | mV | IL = 1.5A | 3 | |||
| Dropout Voltage (VBIAS - VOUT) | 1.3 | 1.65 | V | IL = 750mA | 3 | ||
| Dropout Voltage (VBIAS - VOUT) | 1.9 | 2.1 | V | IL = 1.5A | 3 | ||
| Ground Pin Current | 15 | 25 | mA | IL = 0mA | 3 | ||
| Ground Pin Current | 15 | 30 | mA | IL = 1.5A | 3 | ||
| Current thru VBIAS | 9 | 15 | mA | IL = 0mA | 3 | ||
| Current thru VBIAS | 25 | 32 | mA | IL = 1.5A | 3 | ||
| Current Limit | 1.6 | 2.3 | 3.4 | A | MIC49150 | 3 | |
| Current Limit | 4 | A | MIC49150 | 3 | |||
| Reference Voltage | 0.891 | 0.9 | 0.909 | V | 3 | ||
| Reference Voltage | 0.882 | 0.918 | V | 3 | |||
| Package Thermal Resistance, junction-to-ambient | θJA | 80 | °C/W | MSOP-8 | 3 |
CAD (KiCad official)
- Symbol:
MIC49150YMM-TR - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
mic49150ymm-tr-etched.step/mic49150ymm-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic49150ymm-tr.step/mic49150ymm-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (13 pp, sha256
273cc68b6588ab7d, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).