main
Ray
Publish 0.1.0
4e8b922
MIC4830YMM
Microchip Tech · Other Lighting Drivers · MSOP-8
MIC4830YMM from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply input for internal circuitry, 1.8V to 5.5V. |
| 2 | RSW | input | Sets the internal power MOSFET switching frequency through an external resistor to VDD; connecting the resistor to GND disables the switch oscillator and shuts down the device. |
| 3 | REL | input | Sets the EL frequency of the internal H-bridge driver through an external resistor to VDD; connecting the resistor to GND disables the EL oscillator. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | SW | input | Switch node connected to the internal high-voltage power MOSFET drain. |
| 6 | CS | power_out | Regulated boost output that connects to the boost output capacitor and the cathode of the external diode; CS can reach up to 110V per the application notes. |
| 7 | VB | power_in | EL lamp drive output connected to one end of the EL lamp; polarity is not important. |
| 8 | VA | output | EL lamp drive output connected to one end of the EL lamp; polarity is not important. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| On-resistance | 3.8 | 7 | Ω | ISW = 100mA | 3 | ||
| CS Voltage Variation | VCS | 76 | 88 | 99 | V | VDD = 1.8V to 5.5V | 3 |
| Enable Input Low Voltage (turn-off) | 0.5 | V | VDD = 1.8V to 5.5V | 3 | |||
| Shutdown current | 0.01 | 0.5 | µA | RSW Resistor = LOW; REL Resistor = LOW; VDD = 5.5V | 3 | ||
| Input supply current | 45 | 75 | µA | RSW Resistor = HIGH; REL Resistor = HIGH; VCS = 90V; VA, VB OPEN | 3 | ||
| VA, VB output drive frequency | 158 | 200 | 242 | Hz | REL=1.78MΩ | 3 | |
| Switching transistor frequency | 90 | 112 | 134 | kHz | RSW = 332KΩ | 3 | |
| Switching frequency accuracy | fSW | -20 | 20 | % | Switching frequency range 65kHz to 250kHz | 7 | |
| EL lamp frequency accuracy | fEL | -20 | 20 | % | EL lamp frequency range 60Hz to 1000Hz | 7 | |
| Input current including inductor | 15 | mA | VIN = VDD = 3.2V; RSW = 290KΩ; REL = 1.78MΩ; L=220µH; ROUT = 10kΩ; Lamp = 2in2 | 3 | |||
| Switching transistor duty cycle | 90 | % | 3 | ||||
| Supply Voltage (VDD) absolute maximum | VDD | -0.5 | 6 | V | 3 | ||
| Output Voltage absolute maximum | VCS | -0.5 | 120 | V | 3 | ||
| Switch Voltage absolute maximum | Vsw | -0.5 | 120 | V | 3 | ||
| Storage Temperature | TS | -65 | 150 | °C | 3 | ||
| ESD Rating | 1.5 | kV | Human body model, 1.5k in series with 100pF | 3 | |||
| Supply Voltage (VDD) operating | VDD | 1.8 | 5.5 | V | 3 | ||
| Lamp Drive Frequency operating | fEL | 60 | 1000 | Hz | 3 | ||
| Switching Frequency operating | fSW | 65 | 250 | kHz | 3 | ||
| Ambient Temperature operating | TA | -40 | 85 | °C | 3 |
CAD (KiCad official)
- Symbol:
MIC4830YMM - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
mic4830ymm-etched.step/mic4830ymm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic4830ymm.step/mic4830ymm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (12 pp, sha256
50067594346e60ec, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MIC4830YMM
**Microchip Tech** · Other Lighting Drivers · MSOP-8
MIC4830YMM from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply input for internal circuitry, 1.8V to 5.5V. |
| 2 | RSW | input | Sets the internal power MOSFET switching frequency through an external resistor to VDD; connecting the resistor to GND disables the switch oscillator and shuts down the device. |
| 3 | REL | input | Sets the EL frequency of the internal H-bridge driver through an external resistor to VDD; connecting the resistor to GND disables the EL oscillator. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | SW | input | Switch node connected to the internal high-voltage power MOSFET drain. |
| 6 | CS | power_out | Regulated boost output that connects to the boost output capacitor and the cathode of the external diode; CS can reach up to 110V per the application notes. |
| 7 | VB | power_in | EL lamp drive output connected to one end of the EL lamp; polarity is not important. |
| 8 | VA | output | EL lamp drive output connected to one end of the EL lamp; polarity is not important. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| On-resistance | | | 3.8 | 7 | Ω | ISW = 100mA | 3 |
| CS Voltage Variation | VCS | 76 | 88 | 99 | V | VDD = 1.8V to 5.5V | 3 |
| Enable Input Low Voltage (turn-off) | | | | 0.5 | V | VDD = 1.8V to 5.5V | 3 |
| Shutdown current | | | 0.01 | 0.5 | µA | RSW Resistor = LOW; REL Resistor = LOW; VDD = 5.5V | 3 |
| Input supply current | | | 45 | 75 | µA | RSW Resistor = HIGH; REL Resistor = HIGH; VCS = 90V; VA, VB OPEN | 3 |
| VA, VB output drive frequency | | 158 | 200 | 242 | Hz | REL=1.78MΩ | 3 |
| Switching transistor frequency | | 90 | 112 | 134 | kHz | RSW = 332KΩ | 3 |
| Switching frequency accuracy | fSW | -20 | | 20 | % | Switching frequency range 65kHz to 250kHz | 7 |
| EL lamp frequency accuracy | fEL | -20 | | 20 | % | EL lamp frequency range 60Hz to 1000Hz | 7 |
| Input current including inductor | | | 15 | | mA | VIN = VDD = 3.2V; RSW = 290KΩ; REL = 1.78MΩ; L=220µH; ROUT = 10kΩ; Lamp = 2in2 | 3 |
| Switching transistor duty cycle | | | 90 | | % | | 3 |
| Supply Voltage (VDD) absolute maximum | VDD | -0.5 | | 6 | V | | 3 |
| Output Voltage absolute maximum | VCS | -0.5 | | 120 | V | | 3 |
| Switch Voltage absolute maximum | Vsw | -0.5 | | 120 | V | | 3 |
| Storage Temperature | TS | -65 | | 150 | °C | | 3 |
| ESD Rating | | | | 1.5 | kV | Human body model, 1.5k in series with 100pF | 3 |
| Supply Voltage (VDD) operating | VDD | 1.8 | | 5.5 | V | | 3 |
| Lamp Drive Frequency operating | fEL | 60 | | 1000 | Hz | | 3 |
| Switching Frequency operating | fSW | 65 | | 250 | kHz | | 3 |
| Ambient Temperature operating | TA | -40 | | 85 | °C | | 3 |
## CAD (KiCad official)
- Symbol: `MIC4830YMM`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `mic4830ymm-etched.step` / `mic4830ymm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mic4830ymm.step` / `mic4830ymm.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mic4830ymm-datasheet.pdf) (12 pp, sha256 `50067594346e60ec`, retrieved 2026-11-02, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mic4830ymm-datasheet.pdf)