main
Ray
Publish 0.1.0
4d94429
MIC4827YMM
Microchip Tech · Other Lighting Drivers · MSOP-8
MIC4827YMM from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply input, specified for 1.8V to 5.5V. |
| 2 | RSW | passive | Switcher resistor connected to VDD sets the switching frequency (8kHz to 200kHz); connecting it to GND disables the switch oscillator and shuts down the device. |
| 3 | REL | passive | EL resistor connected to VDD sets the EL drive frequency (60Hz to 1000Hz); connecting it to GND disables the EL oscillator. |
| 4 | GND | power_in | Ground return. |
| 5 | SW | input | Switch node, the drain of the internal high-voltage power MOSFET. |
| 6 | CS | output | Regulated boost output (regulated to 85V to 95V) that connects to the boost output capacitor and the diode cathode; absolute maximum is 100V. |
| 7 | VB | power_in | EL output connected to one end of the EL lamp; polarity is not important. |
| 8 | VA | output | EL output connected to the other end of the EL lamp; polarity is not important. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage regulation (VCS) | VCS | 85 | 90 | 95 | V | VDD = 1.8V to 5.5V | 3 |
| Output voltage regulation (VCS), over temperature | VCS | 83 | 97 | V | VDD = 1.8V to 5.5V; bold values, -40°C < TA < +85°C | 3 | |
| VA, VB output peak-to-peak voltage | VA, VB | 170 | 180 | 190 | V | VDD = 1.8V to 5.5V | 3 |
| VA, VB output peak-to-peak voltage, over temperature | VA, VB | 166 | 194 | V | VDD = 1.8V to 5.5V; bold values, -40°C < TA < +85°C | 3 | |
| Input low voltage (turn-off) | VEN-L | 0.5 | V | VDD = 1.8V to 5.5V | 3 | ||
| Shutdown current | ISD | 0.01 | 0.1 | µA | RSW = LOW; REL = LOW; VDD = 5.5V | 3 | |
| Shutdown current, over temperature | ISD | 0.5 | µA | RSW = LOW; REL = LOW; VDD = 5.5V; bold values, -40°C < TA < +85°C | 3 | ||
| On-resistance of switching transistor | RDS(ON) | 3.8 | 7 | Ω | ISW = 100mA, VCS = 85V | 3 | |
| Input supply current | IVDD | 21 | 75 | µA | RSW = HIGH; REL = HIGH; VCS = 85V; VA, VB OPEN | 3 | |
| Boosted supply current | ICS | 200 | 400 | µA | RSW = HIGH; REL = HIGH; VCS = 85V; VA, VB OPEN | 3 | |
| VA, VB output drive frequency | fEL | 285 | 360 | 435 | Hz | 3 | |
| Switching transistor frequency | fSW | 53 | 66 | 79 | kHz | 3 | |
| Input current including inductor current | IIN | 28 | mA | VIN = VDD = 1.8V (See Test Circuit) | 3 | ||
| Switching transistor duty cycle | D | 90 | % | 3 | |||
| Supply voltage (VDD) absolute maximum | VDD | -0.5 | 6 | V | 3 | ||
| Output voltage (VCS) absolute maximum | VCS | -0.5 | 100 | V | 3 | ||
| Freq. control voltage (VRSW, VREL) absolute maximum | VRSW, VREL | -0.5 | V | Upper limit printed as (VDD + 0.3V) | 3 | ||
| Power dissipation | PD | 200 | mW | TA = 85°C | 3 | ||
| Storage temperature | Ts | -65 | 150 | °C | 3 | ||
| Supply voltage (VDD) operating | VDD | 1.8 | 5.5 | V | 3 | ||
| Lamp drive frequency (fEL) operating | fEL | 60 | 1000 | Hz | 3 | ||
| Switching transistor frequency (fSW) operating | fSW | 8 | 200 | kHz | 3 | ||
| Ambient temperature operating | TA | -40 | 85 | °C | 3 |
CAD (KiCad official)
- Symbol:
MIC4827YMM - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
mic4827ymm-etched.step/mic4827ymm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic4827ymm.step/mic4827ymm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (15 pp, sha256
fe4a8123804dd24a, retrieved 2026-10-29, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MIC4827YMM
**Microchip Tech** · Other Lighting Drivers · MSOP-8
MIC4827YMM from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply input, specified for 1.8V to 5.5V. |
| 2 | RSW | passive | Switcher resistor connected to VDD sets the switching frequency (8kHz to 200kHz); connecting it to GND disables the switch oscillator and shuts down the device. |
| 3 | REL | passive | EL resistor connected to VDD sets the EL drive frequency (60Hz to 1000Hz); connecting it to GND disables the EL oscillator. |
| 4 | GND | power_in | Ground return. |
| 5 | SW | input | Switch node, the drain of the internal high-voltage power MOSFET. |
| 6 | CS | output | Regulated boost output (regulated to 85V to 95V) that connects to the boost output capacitor and the diode cathode; absolute maximum is 100V. |
| 7 | VB | power_in | EL output connected to one end of the EL lamp; polarity is not important. |
| 8 | VA | output | EL output connected to the other end of the EL lamp; polarity is not important. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage regulation (VCS) | VCS | 85 | 90 | 95 | V | VDD = 1.8V to 5.5V | 3 |
| Output voltage regulation (VCS), over temperature | VCS | 83 | | 97 | V | VDD = 1.8V to 5.5V; bold values, -40°C < TA < +85°C | 3 |
| VA, VB output peak-to-peak voltage | VA, VB | 170 | 180 | 190 | V | VDD = 1.8V to 5.5V | 3 |
| VA, VB output peak-to-peak voltage, over temperature | VA, VB | 166 | | 194 | V | VDD = 1.8V to 5.5V; bold values, -40°C < TA < +85°C | 3 |
| Input low voltage (turn-off) | VEN-L | | | 0.5 | V | VDD = 1.8V to 5.5V | 3 |
| Shutdown current | ISD | | 0.01 | 0.1 | µA | RSW = LOW; REL = LOW; VDD = 5.5V | 3 |
| Shutdown current, over temperature | ISD | | | 0.5 | µA | RSW = LOW; REL = LOW; VDD = 5.5V; bold values, -40°C < TA < +85°C | 3 |
| On-resistance of switching transistor | RDS(ON) | | 3.8 | 7 | Ω | ISW = 100mA, VCS = 85V | 3 |
| Input supply current | IVDD | | 21 | 75 | µA | RSW = HIGH; REL = HIGH; VCS = 85V; VA, VB OPEN | 3 |
| Boosted supply current | ICS | | 200 | 400 | µA | RSW = HIGH; REL = HIGH; VCS = 85V; VA, VB OPEN | 3 |
| VA, VB output drive frequency | fEL | 285 | 360 | 435 | Hz | | 3 |
| Switching transistor frequency | fSW | 53 | 66 | 79 | kHz | | 3 |
| Input current including inductor current | IIN | | 28 | | mA | VIN = VDD = 1.8V (See Test Circuit) | 3 |
| Switching transistor duty cycle | D | | 90 | | % | | 3 |
| Supply voltage (VDD) absolute maximum | VDD | -0.5 | | 6 | V | | 3 |
| Output voltage (VCS) absolute maximum | VCS | -0.5 | | 100 | V | | 3 |
| Freq. control voltage (VRSW, VREL) absolute maximum | VRSW, VREL | -0.5 | | | V | Upper limit printed as (VDD + 0.3V) | 3 |
| Power dissipation | PD | | | 200 | mW | TA = 85°C | 3 |
| Storage temperature | Ts | -65 | | 150 | °C | | 3 |
| Supply voltage (VDD) operating | VDD | 1.8 | | 5.5 | V | | 3 |
| Lamp drive frequency (fEL) operating | fEL | 60 | | 1000 | Hz | | 3 |
| Switching transistor frequency (fSW) operating | fSW | 8 | | 200 | kHz | | 3 |
| Ambient temperature operating | TA | -40 | | 85 | °C | | 3 |
## CAD (KiCad official)
- Symbol: `MIC4827YMM`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `mic4827ymm-etched.step` / `mic4827ymm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mic4827ymm.step` / `mic4827ymm.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mic4827ymm-datasheet.pdf) (15 pp, sha256 `fe4a8123804dd24a`, retrieved 2026-10-29, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mic4827ymm-datasheet.pdf)