main
History Download
Ray Publish 0.1.0 119da74

MIC47100YMME

Microchip Tech · Linear Voltage Regulators (LDO) · MSOP-8-EP

MIC47100YMME from Microchip Tech, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input supply, the drain of the NMOS pass transistor, with a regulator input voltage range of 1.0V to 3.6V.
2 IN power_in Input supply, the drain of the NMOS pass transistor, with a regulator input voltage range of 1.0V to 3.6V.
3 GND power_in Ground; the ground pins and exposed pad must be connected externally.
4 BIAS power_in Bias supply for the internal regulator circuitry, with an operating range of 2.3V to 5.5V.
5 EN input TTL/CMOS compatible enable input; logic high enables the output and logic low or open shuts the device down.
6 ADJ input Adjust input for the adjustable version; connect an external resistor divider to program the output voltage between 0.8V and 2.0V.
7 OUT power_out Regulator output voltage, which requires a 1µF or greater ceramic output capacitor for stability.
8 OUT power_out Regulator output voltage, which requires a 1µF or greater ceramic output capacitor for stability.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-8-EP
Category Power Supply Chip
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Supply Voltage (VIN) VIN 0 4 V 4
Bias Supply Voltage (VBIAS) VBIAS 0 6 V 4
Enable Voltage (VEN) VEN 0 6 V 4
Storage Temperature (Ts) Ts -65 150 °C 4
Lead Temperature (soldering) 260 °C soldering, #sec. 4
ESD Rating 2 kV Human body model, 1.5kΩ in series with 100pF 4
Input Supply Voltage (VIN) operating VIN 1 3.6 V 4
Bias Supply Voltage (VBIAS) operating VBIAS 2.3 5.5 V 4
Enable Input Voltage (VEN) operating VEN 0 V maximum is VBIAS 4
Junction Temperature (TJ) TJ -40 125 °C 4
Output Voltage range (adjustable) VOUT 0.8 2 V adjustable version 10
R1 resistor between VOUT and ADJ R1 10 kΩ should not exceed 10kΩ 10
Output capacitor (ceramic) COUT 1 µF required for stability, ceramic 10
Output Voltage Variation from nominal VOUT VOUT -1.5 1.5 % 4
Output Voltage Accuracy over temperature VOUT -2 2 % Variation from nominal VOUT; -40°C to +125°C 4
UVLO Threshold Bias Supply VBIAS 1.9 2.1 2.3 V 4
UVLO Threshold Input Supply VIN 0.7 0.85 1 V 4
Output Voltage Line Regulation (Bias Supply) -0.1 0.015 0.1 %/V VBIAS = VOUT + 2.1V to 5.5V 4
Output Voltage Line Regulation (Input Supply) -0.05 0.005 0.05 %/V VIN = VOUT + 0.5V to 3.6V 4
Current Limit 1.1 1.6 2.5 A VIN = 2.7V; VOUT = 0V 5
Reference Voltage (adjustable option, 25°C) VREF 0.69 0.7 0.71 V adjustable option only; TA = 25°C 5
Reference Voltage (adjustable option, over temperature) VREF 0.686 0.714 V adjustable option only; -40°C < TA < +125°C 5
Enable Voltage Logic Low 0.2 V 5
Enable Voltage Logic High 1 V 5
Load Regulation 0.2 0.5 % IOUT = 10mA to 1A 4
Input Supply Dropout Voltage 8.5 50 mV IOUT = 100mA 4
Input Supply Dropout Voltage 37 250 mV IOUT = 500mA 4
Input Supply Dropout Voltage 80 mV IOUT = 1A 4
Bias Supply Dropout Voltage 1.15 V IOUT = 100mA 4
Bias Supply Dropout Voltage 1.25 V IOUT = 500mA 4
Bias Supply Dropout Voltage 1.35 V IOUT = 1A 4
Ground current from VBIAS 350 500 µA IOUT = 1mA 4
Shutdown current from VBIAS 0.1 1 µA EN < 0.2V 4
Shutdown current from VIN 0.1 1 µA EN < 0.2V 4
Ground current from VIN 6 µA IOUT = 1A 4
Ripple Rejection PSRR 80 dB f = 1kHz; COUT = 1.0µF; IOUT = 100mA 4
Ripple Rejection PSRR 55 dB f = 100kHz; COUT = 1.0µF; IOUT = 100mA 4
Ripple Rejection PSRR 45 dB f = 500kHz; COUT = 1.0µF; IOUT = 100mA 4
UVLO Hysteresis VBIAS VBIAS 70 mV 4
UVLO Hysteresis VIN VIN 25 mV 4
Output Voltage Noise 63 µVRMS COUT=1µF; 10Hz to 100kHz; IOUT = 100mA 5
Over-temperature Shutdown 160 °C 5
Over-temperature Shutdown Hysteresis 20 °C 5
Enable Input Current 1 µA VIL < 0.2V 5
Enable Input Current 6 µA VIH = 1.2V 5
Turn-on Time 35 500 µs COUT = 1µF; 90% of typical VOUT 5
ADJ pin Input Current 20 nA 5

CAD (KiCad official)

  • Symbol: MIC47100YMME
  • Footprint: Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm
  • 3D model: MSOP-8-EP (KiCad packages3D, STEP)
  • 3D model files: mic47100ymme-etched.step / mic47100ymme-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic47100ymme.step / mic47100ymme.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (13 pp, sha256 9f3fa6208cb46d5f, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF