main
Ray Publish 0.1.0 f9bb87a

MIC44F19YML-TR

Microchip Tech · Gate Drive ICs · MLF-8

MIC44F19YML-TR from Microchip Tech, in a MLF-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Driver output (redundant with pin 8 to lower driver impedance); inverting for the MIC44F19, driven high when disabled.
2 VDD power_in Supply input, operating range 4.5V to 12.6V (absolute maximum +13V).
3 NC unconnected No connect.
4 IN input Driver input; for the MIC44F19 logic-high gives a low output and logic-low gives a high output, with ESD rating of 500V.
5 EN/UVLO input Enable/undervoltage lockout input; pulling it low disables the driver (output high for MIC44F19), floating it enables the driver with the internal 4.2V UVLO, and a resistor divider can set a different UVLO threshold (enable threshold 1.4V typ.).
6 GND power_in Ground.
7 GND power_in Ground.
8 OUT output Driver output (redundant with pin 1 to lower driver impedance); 6A peak sink/source capability.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MLF-8
Category Power Supply Chip
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage Range VDD 4.5 12.6 V 4
High Output Quiescent Current IS 2.5 mA VIN = 0V (MIC44F19/20) 4
Low Output Quiescent Current IS 2.5 mA VIN = 5V (MIC44F19/20) 4
Shutdown Current ISD 200 µA VEN = 0V 4
Enable Threshold VEN 1.3 1.4 1.5 V 4
Enable Hysteresis VEN_HYS 120 mV 4
Undervoltage Lockout Threshold (Internally Set) VUVLO 3.6 4.2 4.4 V VEN = open, VDD rising. 4
UVLO Hysteresis 370 mV 4
Input Voltage Range VIN 0 V Steady State Voltage, Note 2; max printed as VDD 4
Logic 1 Input Voltage VIH 1.615 1.7 1.785 V TA = +25°C (±5%) 4
Logic 1 Input Voltage VIH 1.53 1.7 1.87 V Over temperature range (±10%) 4
Logic 0 Input Voltage VIL 1.45 1.53 1.607 V TA = +25°C (±5%) 4
Logic 0 Input Voltage VIL 1.377 1.53 1.683 V Over temperature range (±10%) 4
Input Current IIN 5 µA 4.5V ≤ VIN ≤ 10V 4
Output Low Voltage VOL 0.025 V See Functional Block Diagram 4
Output Resistance, Output High RO 2 Ω IOUT = 100 mA, VDD = 12V 4
Output Resistance, Output High RO 3 Ω IOUT = 100 mA, VDD = 5V 4
Output Resistance, Output Low RO 2 Ω IOUT = 100 mA, VDD = 12V 4
Output Resistance, Output Low RO 3 Ω IOUT = 100 mA, VDD = 5V 4
Peak Output Sink Current IPEAK 6 A VDD = 12V 4
Peak Output Source Current IPEAK 6 A VS = 12V 4
Latch-Up Protection Withstand Reverse Current IR 500 mA printed as >500 4
Rise Time tR 10 20 ns VS = 12V, CL = 1000 pF 5
Fall Time tF 10 20 ns VS = 12V, CL = 1000 pF 5
Delay Time tD1 15 35 ns VS = 12V, CL = 1000 pF 5
Delay Time tD2 13 35 ns VS = 12V, CL = 1000 pF 5
Pulse Width tPW 50 ns VS = 12V, See Timing Diagram 5
Supply Voltage VDD 13 V 3
UVLO/Enable Voltage VUVLO/EN 13 V 3
Output Voltage VOUT 13 V 3
ESD Rating, Pins 1,2,3,5,6,7,8 2 kV Human body model, 1.5 kΩ in series with 100 pF 3
ESD Rating, Pin 4 500 V Human body model, 1.5 kΩ in series with 100 pF 3
Supply Voltage (Operating Ratings) VDD 4.5 12.6 V 3
Maximum Junction Temperature 150 °C 6
Storage Temperature Range TDD -65 150 °C 6
Lead Temperature 300 °C Soldering, 10s 6
Thermal Resistance 3x3 DFN-8Ld θJA 93 °C/W 6

CAD (KiCad official)

  • Symbol: MIC44F19YML-TR
  • Footprint: Package_DFN_QFN:MLF-8-1EP_3x3mm_P0.65mm_EP1.55x2.3mm
  • 3D model: MLF-8 (KiCad packages3D, STEP)
  • 3D model files: mic44f19yml-tr-etched.step / mic44f19yml-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic44f19yml-tr.step / mic44f19yml-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (26 pp, sha256 efe1885fdfddcd8d, retrieved 2026-10-26, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF