# MIC4426YMM

**Microchip Tech** · Gate Drive ICs · MSOP-8

MIC4426YMM from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not internally connected. |
| 2 | INA | input | Control Input A: TTL/CMOS compatible logic input; inverting for MIC4426, threshold approximately 1.5V with 100 mV hysteresis, protected to -5V. |
| 3 | GND | power_in | Ground; can withstand up to 5V noise spikes of either polarity. |
| 4 | INB | input | Control Input B: TTL/CMOS compatible logic input; inverting for MIC4426, threshold approximately 1.5V with 100 mV hysteresis, protected to -5V. |
| 5 | OUTB | output | Output B: CMOS totem-pole output with 1.5A peak current that swings within 25 mV of supply or ground. |
| 6 | VS | power_in | Supply Input: +4.5V to +18V operating range (22V absolute maximum). |
| 7 | OUTA | output | Output A: CMOS totem-pole output with 1.5A peak current that swings within 25 mV of supply or ground. |
| 8 | NC | unconnected | Not internally connected. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (absolute maximum) | VS |  |  | 22 | V |  | 3 |
| Input Voltage (absolute maximum) | VIN | -5 |  | 0.3 | V | GND, 5V to VS + 0.3V (max is VS + 0.3V, min is GND, 5V) | 3 |
| Supply Voltage (operating) | VS | 4.5 |  | 18 | V |  | 3 |
| Logic 1 Input Voltage | VIH | 2.4 | 1.4 |  | V | TA = +25°C | 3 |
| Logic 1 Input Voltage (full temp range) | VIH | 2.4 | 1.5 |  | V | full specified temperature range | 3 |
| Logic 0 Input Voltage | VIL |  | 1.1 | 0.8 | V | TA = +25°C | 3 |
| Logic 0 Input Voltage (full temp range) | VIL |  | 1 | 0.8 | V | full specified temperature range | 3 |
| Input Current | IIN | -1 |  | 1 | μA | 0V ≤ VIN ≤ VS | 3 |
| High Output Voltage | VOH | -0.025 |  |  | V | min printed as VS, 0.025 (relative to VS) | 3 |
| Low Output Voltage | VOL |  |  | 0.025 | V |  | 3 |
| Output Resistance | RO |  | 6 | 10 | Ω | IOUT = 10 mA, VS = 18V; TA = +25°C | 3 |
| Output Resistance (full temp range) | RO |  | 8 | 12 | Ω | IOUT = 10 mA, VS = 18V; full specified temperature range | 3 |
| Latch-Up Protection | I | 500 |  |  | mA | Withstand Reverse Current (printed >500) | 3 |
| Rise Time | tr |  | 18 | 30 | ns | Test Figure 1-1; TA = +25°C | 3 |
| Rise Time (full temp range) | tr |  | 20 | 40 | ns | Test Figure 1-1; full specified temperature range | 3 |
| Fall Time | tf |  | 15 | 20 | ns | Test Figure 1-1; TA = +25°C | 3 |
| Fall Time (full temp range) | tf |  | 29 | 40 | ns | Test Figure 1-1; full specified temperature range | 3 |
| Delay Time | tD1 |  | 17 | 30 | ns | Test Figure 1-1; TA = +25°C | 3 |
| Delay Time (full temp range) | tD1 |  | 19 | 40 | ns | Test Figure 1-1; full specified temperature range | 3 |
| Delay Time | tD2 |  | 23 | 50 | ns | Test Figure 1-1; TA = +25°C | 3 |
| Delay Time (full temp range) | tD2 |  | 27 | 60 | ns | Test Figure 1-1; full specified temperature range | 3 |
| Pulse Width | tPW | 400 |  |  | ns | Test Figure 1-1 | 4 |
| Power Supply Current | IS | 0.6 | 1.4 | 4.5 | mA | VINA = VINB = 3.0V; TA = +25°C | 4 |
| Power Supply Current (full temp range) | IS |  | 1.5 | 8 | mA | VINA = VINB = 3.0V; full specified temperature range | 4 |
| Power Supply Current | IS |  | 0.18 | 0.4 | mA | VINA = VINB = 0V; TA = +25°C | 4 |
| Power Supply Current (full temp range) | IS |  | 0.19 | 0.6 | mA | VINA = VINB = 0V; full specified temperature range | 4 |
| Maximum Junction Temperature | TJ |  |  | 150 | °C |  | 4 |
| Storage Temperature Range | TS | -65 |  | 150 | °C |  | 4 |
| Lead Temperature |  |  |  | 300 | °C | 10 sec. | 4 |
| Junction Operating Temperature Range | TJ | -40 |  | 85 | °C | Y option | 4 |
| Peak Output Current | IPK |  | 1.5 |  | A |  | 3 |
| Thermal Resistance, MSOP 8-Ld | θJA |  | 250 |  | °C/W |  | 4 |

## CAD (KiCad official)

- Symbol: `MIC4426YMM`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `mic4426ymm-etched.step` / `mic4426ymm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mic4426ymm.step` / `mic4426ymm.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Microchip Tech datasheet](docs/mic4426ymm-datasheet.pdf) (20 pp, sha256 `2d840005217a3aea`, retrieved 2026-10-23, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/mic4426ymm-datasheet.pdf)