Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MIC4422AYN

Microchip Tech · Gate Drive ICs · PDIP-8

MIC4422AYN from Microchip Tech, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VS power_in Supply input rated +4.5V to +18V; duplicate pin must be externally connected to pin 8, with external decoupling capacitors recommended.
2 IN input Control input, TTL-compatible (logic high from 2.4V to VS), must be forced high or low externally as a floating input causes unpredictable operation, and withstands negative swing up to 5V.
3 NC unconnected Not connected.
4 GND power_in Ground; duplicate pin must be externally connected to pin 5.
5 GND power_in Ground; duplicate pin must be externally connected to pin 4.
6 OUT output Driver output for a capacitive/MOSFET gate load (non-inverting on MIC4422A); duplicate pin must be externally connected to pin 7.
7 OUT output Driver output for a capacitive/MOSFET gate load (non-inverting on MIC4422A); duplicate pin must be externally connected to pin 6.
8 VS power_in Supply input rated +4.5V to +18V; duplicate pin must be externally connected to pin 1.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package PDIP-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Input Voltage VS 4.5 18 V 3
High Output Quiescent Current IS 0.5 1.5 mA VIN = 3V (MIC4422A) 3
Low Output Quiescent Current IS 50 150 µA VIN = 0V (MIC4422A) 3
Logic 1 Input Voltage VIH 3 2.1 V See Figure 1-3 3
Logic 0 Input Voltage VIL 1.5 0.8 V See Figure 1-3 3
Input Voltage Range VIN -5 V 3
Input Current IIN -10 10 µA 0V ≤ VIN ≤ VS 3
Low Output Voltage VOL 0.025 V See Figure 1-1 3
Output Resistance, Output High RO 0.6 1 Ω IOUT = 10 mA, VS = 18V 3
Output Resistance, Output Low RO 0.8 1.7 Ω IOUT = 10 mA, VS = 18V 3
Withstand Reverse Current IR 1500 mA Duty Cycle ≤ 2%, t ≤ 300 µs, Note 1 4
Rise Time tr 20 75 ns Figure 1-1, CL = 10,000 pF 4
Fall Time tf 24 75 ns Figure 1-1, CL = 10,000 pF 4
Delay Time tD1 15 68 ns Figure 1-1 4
Delay Time tD2 35 60 ns Figure 1-1 4
Supply Voltage VS 20 V 3
Control Input Current 50 mA VIN > VS 3
ESD Rating 2 kV Human body model, 1.5 kΩ in series with 100 pF 3
Maximum Junction Temperature TJ 150 °C 5
Storage Temperature Range TS -65 150 °C 5
Lead Temperature 300 °C Soldering, 10 sec. 5
Supply Voltage (operating) VS 4.5 18 V Operating Ratings 3
Ambient Operating Temperature Range TA -40 85 °C Y option 5
Thermal Resistance, PDIP 8-Ld θJA 84.6 °C/W 5
Thermal Resistance, PDIP 8-Ld θJC 41.2 °C/W 5
Peak Output Current IPK 9 A VS = 18V, See Figure 5-2 4
Continuous Output Current IDC 2 A 4
Minimum Input Pulse Width tPW 50 ns See Figure 1-1 and Figure 1-2. 4
Maximum Input Frequency fMAX 1 MHz See Figure 1-1 and Figure 1-2. 4

CAD (KiCad official)

  • Symbol: MIC4422AYN
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: PDIP-8 (KiCad packages3D, STEP)
  • 3D model files: mic4422ayn-etched.step / mic4422ayn-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic4422ayn.step / mic4422ayn.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (26 pp, sha256 fcd0b5f52bab360f, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF