main
Ray
Publish 0.1.0
b6aacd6
MIC4421YN
Microchip Tech · Gate Drive ICs · PDIP-8
MIC4421YN from Microchip Tech, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VS | power_in | Supply input; the two VS pins (1 and 8) must be externally connected together, with operating input voltage 4.5 V to 18 V and an absolute maximum supply of 20 V. |
| 2 | IN | input | Control input that accepts any logic input from 2.4 V to VS, may swing negative by up to 5 V, and has an input voltage range of -5 V to VS + 0.3 V. |
| 3 | NC | unconnected | Not connected. |
| 4 | GND | power_in | Ground; the duplicate GND pins (4 and 5) must be externally connected together and to power ground. |
| 5 | GND | power_in | Ground; the duplicate GND pins (4 and 5) must be externally connected together and to power ground. |
| 6 | OUT | output | Driver output with 9 A peak and 2 A continuous output current; the duplicate OUT pins (6 and 7) must be externally connected together. |
| 7 | OUT | output | Driver output with 9 A peak and 2 A continuous output current; the duplicate OUT pins (6 and 7) must be externally connected together. |
| 8 | VS | power_in | Supply input; the two VS pins (1 and 8) must be externally connected together, with operating input voltage 4.5 V to 18 V and an absolute maximum supply of 20 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | PDIP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic 1 Input Voltage (25°C table) | VIH | 2.4 | V | TA = 25°C; 4.5 V ≤ VS ≤ 18 V | 3 | ||
| Logic 0 Input Voltage (25°C table) | VIL | 0.8 | V | TA = 25°C; 4.5 V ≤ VS ≤ 18 V | 3 | ||
| Input Voltage Range (25°C table) | VIN | -5 | V | TA = 25°C; 4.5 V ≤ VS ≤ 18 V; printed max is VS+0.3 V (not numeric) | 3 | ||
| Input Current (25°C table) | IIN | -10 | 10 | µA | TA = 25°C; 0 V ≤ VIN ≤ VS | 3 | |
| Output Resistance, Output Low (25°C table) | RO | 0.8 | 1.7 | Ω | TA = 25°C; IOUT = 10 mA, VS = 18 V | 3 | |
| Latch-Up Protection Withstand Reverse Current (25°C table) | IR | 1500 | mA | TA = 25°C; Duty cycle ≤ 2%, t ≤ 300 µs | 3 | ||
| Rise Time (25°C table) | tR | 20 | 75 | ns | TA = 25°C; Test Figure 1, CL = 10,000 pF | 3 | |
| Fall Time (25°C table) | tF | 24 | 75 | ns | TA = 25°C; Test Figure 1, CL = 10,000 pF | 3 | |
| Delay Time tD1 (25°C table) | tD1 | 15 | 60 | ns | TA = 25°C; Test Figure 1 | 3 | |
| Delay Time tD2 (25°C table) | tD2 | 35 | 60 | ns | TA = 25°C; Test Figure 1 | 3 | |
| Power Supply Current (25°C table) | IS | 0.4 | 1.5 | mA | TA = 25°C; VIN = 3 V | 3 | |
| Power Supply Current (25°C table) | IS | 80 | 150 | µA | TA = 25°C; VIN = 0 V | 3 | |
| Operating Input Voltage (25°C table) | VS | 4.5 | 18 | V | TA = 25°C | 3 | |
| Logic 1 Input Voltage (over operating temperature range) | VIH | 2.4 | V | Over operating temperature range; 4.5 V ≤ VS ≤ 18 V | 4 | ||
| Logic 0 Input Voltage (over operating temperature range) | VIL | 0.8 | V | Over operating temperature range; 4.5 V ≤ VS ≤ 18 V | 4 | ||
| Input Voltage Range (over operating temperature range) | VIN | -5 | V | Over operating temperature range; 4.5 V ≤ VS ≤ 18 V; printed max is VS+0.3 V (not numeric) | 4 | ||
| Input Current (over operating temperature range) | IIN | -10 | 10 | µA | Over operating temperature range; 0V ≤ VIN ≤ VS | 4 | |
| Output Resistance, Output High (over operating temperature range) | RO | 0.8 | 3.6 | Ω | Over operating temperature range; IOUT = 10mA, VS = 18V | 4 | |
| Output Resistance, Output Low (over operating temperature range) | RO | 1.3 | 2.7 | Ω | Over operating temperature range; IOUT = 10mA, VS = 18V | 4 | |
| Rise Time (over operating temperature range) | tR | 23 | 120 | ns | Over operating temperature range; Figure 1, CL = 10,000pF | 4 | |
| Fall Time (over operating temperature range) | tF | 30 | 120 | ns | Over operating temperature range; Figure 1, CL = 10,000pF | 4 | |
| Delay Time tD1 (over operating temperature range) | tD1 | 20 | 80 | ns | Over operating temperature range; Figure 1 | 4 | |
| Delay Time tD2 (over operating temperature range) | tD2 | 40 | 80 | ns | Over operating temperature range; Figure 1 | 4 | |
| Power Supply Current (over operating temperature range) | IS | 0.6 | 3 | mA | Over operating temperature range; VIN = 3V | 4 | |
| Power Supply Current (over operating temperature range) | IS | 0.1 | 0.2 | Over operating temperature range; VIN = 0V | 4 | ||
| Operating Input Voltage (over operating temperature range) | VS | 4.5 | 18 | V | Over operating temperature range | 4 | |
| Supply Voltage | 20 | V | 3 | ||||
| Input Voltage | -5 | V | Printed range VS + 0.3 V to GND, 5 V; upper limit not numeric | 3 | |||
| Input Current (VIN > VS) | 50 | mA | VIN > VS | 3 | |||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Lead Temperature | 300 | °C | 10 sec | 3 | |||
| Junction Temperature | 150 | °C | Operating Ratings | 3 | |||
| Ambient Temperature (B version, MIC4421YN) | -40 | 85 | °C | B version | 3 | ||
| Thermal Resistance, 8-pin plastic DIP | θJA | 130 | °C/W | 8-pin plastic DIP, as stated in application text | 8 |
CAD (KiCad official)
- Symbol:
MIC4421YN - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
mic4421yn-etched.step/mic4421yn-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic4421yn.step/mic4421yn.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (12 pp, sha256
d040547a522ef137, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MIC4421YN
**Microchip Tech** · Gate Drive ICs · PDIP-8
MIC4421YN from Microchip Tech, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VS | power_in | Supply input; the two VS pins (1 and 8) must be externally connected together, with operating input voltage 4.5 V to 18 V and an absolute maximum supply of 20 V. |
| 2 | IN | input | Control input that accepts any logic input from 2.4 V to VS, may swing negative by up to 5 V, and has an input voltage range of -5 V to VS + 0.3 V. |
| 3 | NC | unconnected | Not connected. |
| 4 | GND | power_in | Ground; the duplicate GND pins (4 and 5) must be externally connected together and to power ground. |
| 5 | GND | power_in | Ground; the duplicate GND pins (4 and 5) must be externally connected together and to power ground. |
| 6 | OUT | output | Driver output with 9 A peak and 2 A continuous output current; the duplicate OUT pins (6 and 7) must be externally connected together. |
| 7 | OUT | output | Driver output with 9 A peak and 2 A continuous output current; the duplicate OUT pins (6 and 7) must be externally connected together. |
| 8 | VS | power_in | Supply input; the two VS pins (1 and 8) must be externally connected together, with operating input voltage 4.5 V to 18 V and an absolute maximum supply of 20 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | PDIP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic 1 Input Voltage (25°C table) | VIH | 2.4 | | | V | TA = 25°C; 4.5 V ≤ VS ≤ 18 V | 3 |
| Logic 0 Input Voltage (25°C table) | VIL | | | 0.8 | V | TA = 25°C; 4.5 V ≤ VS ≤ 18 V | 3 |
| Input Voltage Range (25°C table) | VIN | -5 | | | V | TA = 25°C; 4.5 V ≤ VS ≤ 18 V; printed max is VS+0.3 V (not numeric) | 3 |
| Input Current (25°C table) | IIN | -10 | | 10 | µA | TA = 25°C; 0 V ≤ VIN ≤ VS | 3 |
| Output Resistance, Output Low (25°C table) | RO | | 0.8 | 1.7 | Ω | TA = 25°C; IOUT = 10 mA, VS = 18 V | 3 |
| Latch-Up Protection Withstand Reverse Current (25°C table) | IR | 1500 | | | mA | TA = 25°C; Duty cycle ≤ 2%, t ≤ 300 µs | 3 |
| Rise Time (25°C table) | tR | | 20 | 75 | ns | TA = 25°C; Test Figure 1, CL = 10,000 pF | 3 |
| Fall Time (25°C table) | tF | | 24 | 75 | ns | TA = 25°C; Test Figure 1, CL = 10,000 pF | 3 |
| Delay Time tD1 (25°C table) | tD1 | | 15 | 60 | ns | TA = 25°C; Test Figure 1 | 3 |
| Delay Time tD2 (25°C table) | tD2 | | 35 | 60 | ns | TA = 25°C; Test Figure 1 | 3 |
| Power Supply Current (25°C table) | IS | | 0.4 | 1.5 | mA | TA = 25°C; VIN = 3 V | 3 |
| Power Supply Current (25°C table) | IS | | 80 | 150 | µA | TA = 25°C; VIN = 0 V | 3 |
| Operating Input Voltage (25°C table) | VS | 4.5 | | 18 | V | TA = 25°C | 3 |
| Logic 1 Input Voltage (over operating temperature range) | VIH | 2.4 | | | V | Over operating temperature range; 4.5 V ≤ VS ≤ 18 V | 4 |
| Logic 0 Input Voltage (over operating temperature range) | VIL | | | 0.8 | V | Over operating temperature range; 4.5 V ≤ VS ≤ 18 V | 4 |
| Input Voltage Range (over operating temperature range) | VIN | -5 | | | V | Over operating temperature range; 4.5 V ≤ VS ≤ 18 V; printed max is VS+0.3 V (not numeric) | 4 |
| Input Current (over operating temperature range) | IIN | -10 | | 10 | µA | Over operating temperature range; 0V ≤ VIN ≤ VS | 4 |
| Output Resistance, Output High (over operating temperature range) | RO | | 0.8 | 3.6 | Ω | Over operating temperature range; IOUT = 10mA, VS = 18V | 4 |
| Output Resistance, Output Low (over operating temperature range) | RO | | 1.3 | 2.7 | Ω | Over operating temperature range; IOUT = 10mA, VS = 18V | 4 |
| Rise Time (over operating temperature range) | tR | | 23 | 120 | ns | Over operating temperature range; Figure 1, CL = 10,000pF | 4 |
| Fall Time (over operating temperature range) | tF | | 30 | 120 | ns | Over operating temperature range; Figure 1, CL = 10,000pF | 4 |
| Delay Time tD1 (over operating temperature range) | tD1 | | 20 | 80 | ns | Over operating temperature range; Figure 1 | 4 |
| Delay Time tD2 (over operating temperature range) | tD2 | | 40 | 80 | ns | Over operating temperature range; Figure 1 | 4 |
| Power Supply Current (over operating temperature range) | IS | | 0.6 | 3 | mA | Over operating temperature range; VIN = 3V | 4 |
| Power Supply Current (over operating temperature range) | IS | | 0.1 | 0.2 | | Over operating temperature range; VIN = 0V | 4 |
| Operating Input Voltage (over operating temperature range) | VS | 4.5 | | 18 | V | Over operating temperature range | 4 |
| Supply Voltage | | | | 20 | V | | 3 |
| Input Voltage | | -5 | | | V | Printed range VS + 0.3 V to GND, 5 V; upper limit not numeric | 3 |
| Input Current (VIN > VS) | | | | 50 | mA | VIN > VS | 3 |
| Storage Temperature | | -65 | | 150 | °C | | 3 |
| Lead Temperature | | | | 300 | °C | 10 sec | 3 |
| Junction Temperature | | | | 150 | °C | Operating Ratings | 3 |
| Ambient Temperature (B version, MIC4421YN) | | -40 | | 85 | °C | B version | 3 |
| Thermal Resistance, 8-pin plastic DIP | θJA | | 130 | | °C/W | 8-pin plastic DIP, as stated in application text | 8 |
## CAD (KiCad official)
- Symbol: `MIC4421YN`
- Footprint: `Package_DIP:DIP-8_W7.62mm`
- 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files: `mic4421yn-etched.step` / `mic4421yn-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mic4421yn.step` / `mic4421yn.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mic4421yn-datasheet.pdf) (12 pp, sha256 `d040547a522ef137`, retrieved 2026-10-28, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mic4421yn-datasheet.pdf)