Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MIC4223YMME

Microchip Tech · Gate Drive ICs · MSOP-8-EP

MIC4223YMME from Microchip Tech, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ENA input Enable pin for output A; a logic-level high enables the device, an internal pull-up enables the part if the pin is open, and a logic-level low disables the device so the output goes low regardless of the input state.
2 INA input Control Input A is a TTL/CMOS-compatible logic input that should be connected to VDD or ground if not used, and ENA should be connected to ground to disable driver A.
3 GND power_in Ground reference pin for the device.
4 INB input Control Input B is a TTL/CMOS-compatible logic input that should be connected to VDD or ground if not used, and ENB should be connected to ground to disable driver B.
5 OUTB output Output B is a parallel Bipolar/CMOS driver output.
6 VDD power_in Voltage supply input rated +4.5V to +18V.
7 OUTA output Output A is a parallel Bipolar/CMOS driver output.
8 ENB input Enable pin for output B; a logic-level high enables the device, an internal pull-up enables the part if the pin is open, and a logic-level low disables the device so the output goes low regardless of the input state.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-8-EP
Category Power Supply Chip
Pins 9

CAD (KiCad official)

  • Symbol: MIC4223YMME
  • Footprint: Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm
  • 3D model: MSOP-8-EP (KiCad packages3D, STEP)
  • 3D model files: mic4223ymme-etched.step / mic4223ymme-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic4223ymme.step / mic4223ymme.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (20 pp, sha256 7d64c30cb5fc69b8, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF