Generated by kicad-footprint-generator · KiCad file format 20260206
MIC4223YM
Microchip Tech · Gate Drive ICs · SOIC-8
MIC4223YM from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ENA | input | Enable input for output A; a logic-level high enables the driver, the pin is internally pulled up so the part is enabled if left open, and a logic-level low disables the device so OUTA is low regardless of INA. |
| 2 | INA | input | TTL/CMOS-compatible control input A; connect to VDD or ground if not used, and connect ENA to ground to disable driver A. |
| 3 | GND | power_in | Ground reference for the device. |
| 4 | INB | input | TTL/CMOS-compatible control input B; connect to VDD or ground if not used, and connect ENB to ground to disable driver B. |
| 5 | OUTB | output | Output B, a parallel bipolar/CMOS driver output. |
| 6 | VDD | power_in | Supply input, specified for +4.5V to +18V. |
| 7 | OUTA | output | Output A, a parallel bipolar/CMOS driver output. |
| 8 | ENB | input | Enable input for output B; a logic-level high enables the driver, the pin is internally pulled up so the part is enabled if left open, and a logic-level low disables the device so OUTB is low regardless of INB. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic 1 Input Voltage | VIH | 2.4 | 2.2 | V | 3 | ||
| Logic 0 Input Voltage | VIL | 1.95 | 0.8 | V | 3 | ||
| Input Hysteresis | 0.25 | V | 3 | ||||
| Input Current | IIN | -10 | 10 | µA | 0 ≤ VIN ≤ VDD | 3 | |
| Input Current | IIN | -40 | mA | VIN = -5V | 3 | ||
| Low Output Voltage | VOL | 0.3 | V | IOUT = 10mA, VDD = 18V | 3 | ||
| Output Resistance, Source | RO | 30 | 45 | Ω | IOUT = -10mA, VDD = 18V | 3 | |
| Output Resistance, Sink | RO | 16 | 30 | Ω | IOUT = 10mA, VDD = 18V | 3 | |
| Peak Output Current | IPK | -3 | 3 | A | VDD = 8V | 3 | |
| Peak Output Current | IPK | -4 | 4 | A | VDD = 12V | 3 | |
| Latch-Up Protection Withstand reverse current | I | 500 | mA | Withstand reverse current | 3 | ||
| Rise Time | tR | 15 | 40 | ns | Test Figure 1; CL = 2000pF | 3 | |
| Fall Time | tF | 15 | 40 | ns | Test Figure 1; CL = 2000pF | 3 | |
| Delay Time | tD1 | 25 | 45 | ns | Test Figure 1; CL = 2000pF | 3 | |
| Delay Time | tD2 | 35 | 50 | ns | Test Figure 1; CL = 2000pF | 3 | |
| High Level Enable Voltage | VEN_H | 2.4 | 1.9 | V | LO to HI transition | 3 | |
| Low Level Enable Voltage | VEN_L | 1.55 | 0.8 | V | HI to LO transition | 3 | |
| Enable Hysteresis | 0.35 | V | 3 | ||||
| Enable Impedance | REN | 100 | kΩ | VDD = 18V, VENA = VENB = GND | 3 | ||
| Propagation Delay Time | tD3 | 20 | 60 | ns | CL = 2000pF | 3 | |
| Propagation Delay Time | tD4 | 45 | 150 | ns | CL = 2000pF | 3 | |
| Power Supply Current (high input) | ISH | 1.7 | 2.5 | mA | VINA = VINB = 3.0V, VENA = VENB = open | 3 | |
| Power Supply Current (low input) | ISL | 0.7 | 1.5 | mA | VINA = VINB = 0.0V, VENA = VENB = open | 3 | |
| Supply Voltage (VDD) | VDD | 20 | V | 3 | |||
| Input Voltage (VINA, VINB) lower limit | VINA, VINB | -5 | V | GND - 5V | 3 | ||
| Junction Temperature (TJ) | TJ | -55 | 150 | °C | 3 | ||
| Storage Temperature | TSTG | -65 | 150 | °C | 3 | ||
| Lead Temperature | 300 | °C | 10 sec. | 3 | |||
| ESD Rating | 2 | kV | HBM | 3 | |||
| ESD Rating | 200 | V | MM | 3 | |||
| Supply Voltage (VDD) | VDD | 4.5 | 18 | V | 3 | ||
| Junction Temperature (TJ) | TJ | -40 | 125 | °C | 3 |
CAD (KiCad official)
- Symbol:
MIC4223YM - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mic4223ym-etched.step/mic4223ym-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic4223ym.step/mic4223ym.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (20 pp, sha256
7d64c30cb5fc69b8, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).