Generated by kicad-footprint-generator · KiCad file format 20260206
MIC4125YME
Microchip Tech · Gate Drive ICs · SOIC-8-EP
MIC4125YME from Microchip Tech, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not connected. |
| 2 | INA | input | Control input for driver A (non-inverting input on MIC4125 channel A per the inverting + noninverting configuration; unused inputs must be grounded). |
| 3 | GND | power_in | Ground; duplicate pins must be externally connected together. |
| 4 | INB | input | Control input for driver B; unused inputs must be grounded. |
| 5 | OUTB | output | Driver B output; duplicate pins must be externally connected together. |
| 6 | VS | power_in | Supply input, 4.5V to 20V operating range; duplicate pins must be externally connected together. |
| 7 | OUTA | output | Driver A output; duplicate pins must be externally connected together. |
| 8 | NC | unconnected | Not connected. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8-EP |
| Category | Power Supply Chip |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic 1 Input Voltage | VIH | 2.4 | 1.5 | V | 3 | ||
| Logic 0 Input Voltage | VIL | 1.3 | 0.8 | V | 3 | ||
| Input Current | IIN | -1 | 1 | µA | 0V ≤ VIN ≤ VS | 3 | |
| Input Current (over temperature) | IIN | -10 | 10 | µA | 0V ≤ VIN ≤ VS, -40°C ≤ TJ ≤ +125°C | 3 | |
| Low Output Voltage | VOL | 0.025 | V | IOUT = -100 µA | 3 | ||
| Output Resistance High State | RO | 2.3 | 5 | Ω | IOUT = 10 mA, VS = 20V | 3 | |
| Output Resistance High State (over temperature) | RO | 8 | Ω | IOUT = 10 mA, VS = 20V, -40°C ≤ TJ ≤ +125°C | 3 | ||
| Output Resistance Low State | RO | 2.2 | 5 | Ω | IOUT = 10 mA, VS = 20V | 3 | |
| Output Resistance Low State (over temperature) | RO | 8 | Ω | IOUT = 10 mA, VS = 20V, -40°C ≤ TJ ≤ +125°C | 3 | ||
| Latch-Up Protection Withstand Reverse Current | I | 200 | mA | 3 | |||
| Rise Time | tr | 11 | 35 | ns | Test Figure 1-1, CL = 1800 pF | 3 | |
| Rise Time (over temperature) | tr | 60 | ns | Test Figure 1-1, CL = 1800 pF, -40°C ≤ TJ ≤ +125°C | 3 | ||
| Fall Time | tf | 11 | 35 | ns | Test Figure 1-1, CL = 1800 pF | 3 | |
| Fall Time (over temperature) | tf | 60 | ns | Test Figure 1-1, CL = 1800 pF, -40°C ≤ TJ ≤ +125°C | 3 | ||
| Delay Time | tD1 | 44 | 75 | ns | Test Figure 1-1, CL = 1800 pF | 4 | |
| Delay Time (over temperature) | tD1 | 100 | ns | Test Figure 1-1, CL = 1800 pF, -40°C ≤ TJ ≤ +125°C | 4 | ||
| Delay Time | tD2 | 59 | 75 | ns | Test Figure 1-1, CL = 1800 pF | 4 | |
| Power Supply Current | IS | 1.5 | 2.5 | mA | VIN = 3.0V (both inputs) | 4 | |
| Power Supply Current (over temperature) | IS | 3.5 | mA | VIN = 3.0V (both inputs), -40°C ≤ TJ ≤ +125°C | 4 | ||
| Power Supply Current | IS | 0.15 | 0.25 | mA | VIN = 0V (both inputs) | 4 | |
| Power Supply Current (over temperature) | IS | 0.3 | mA | VIN = 0V (both inputs), -40°C ≤ TJ ≤ +125°C | 4 | ||
| Supply Voltage (absolute maximum) | VS | 24 | V | 3 | |||
| Operating Supply Voltage | VS | 4.5 | 20 | V | 3 | ||
| Maximum Junction Temperature | TJ | 150 | °C | 5 | |||
| Storage Temperature Range | TS | -65 | 150 | °C | 5 | ||
| Lead Temperature | 300 | °C | 10 sec. | 5 | |||
| Junction Operating Temperature Range | TJ | -40 | 125 | °C | 5 | ||
| Thermal Resistance, EP SOIC-8 | θJA | 58 | °C/W | 5 | |||
| Peak Output Current | IPK | 3 | A | 3 |
CAD (KiCad official)
- Symbol:
MIC4125YME - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOIC-8-EP (KiCad packages3D, STEP)
- 3D model files:
mic4125yme-etched.step/mic4125yme-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic4125yme.step/mic4125yme.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (28 pp, sha256
b82ced325844edba, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).