component
MIC39100MP-5.0
Public Made by Adomby adom
HGSEMI Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMIC39100MP-5.0
HGSEMI · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223
MIC39100MP-5.0 from HGSEMI, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Supply input; recommended operating range is +2.25V to +16V (absolute maximum -20V to +20V), with a 1µF or greater input capacitor recommended if far from bulk supply capacitance. |
| 2 | GND | power_in | Ground, connected internally to the TAB. |
| 3 | OUT | power_out | Regulated 5.0V fixed output, 1A minimum guaranteed output current, requiring an output capacitor with ESR below 2Ω for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOT-223 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VIN) | VIN | 2.25 | 16 | V | 4 | ||
| Enable voltage (VEN) | VEN | 2.25 | 16 | V | 4 | ||
| Junction temperature | TJ | -40 | 125 | ℃ | 4 | ||
| Supply voltage (absolute maximum) | VIN | -20 | 20 | V | 3 | ||
| Enable voltage (absolute maximum) | VEN | 20 | V | 3 | |||
| Storage temperature | TSTG | -65 | 150 | ℃ | 3 | ||
| Lead temperature (soldering, 10 sec.) | TL | 245 | ℃ | soldering, 10 sec. | 3 | ||
| Output voltage accuracy | VOUT | -1 | 1 | % | 10mA | 4 | |
| Output voltage accuracy over line and load | VOUT | -2 | 2 | % | 10mA ≤ IOUT ≤ 1A, VOUT+1V ≤ VIN ≤ 8V | 4 | |
| Line regulation | LNR | 0.06 | 0.5 | % | IOUT = 10mA, VOUT+1V ≤ VIN ≤ 16V | 4 | |
| Load regulation | LDR | 0.2 | 1 | % | VIN = VOUT+1V, 10mA ≤ IOUT ≤ 1A | 4 | |
| Output voltage temperature coefficient | ∆VOUT/∆T | 40 | 100 | ppm/℃ | 4 | ||
| Dropout voltage | VDO | 150 | 250 | mV | IOUT = 100mA, VOUT = -1% | 4 | |
| Dropout voltage | VDO | 330 | 500 | mV | IOUT=750mA, VOUT = -1% | 4 | |
| Dropout voltage | VDO | 410 | 630 | mV | IOUT = 1A, VOUT = -1% | 4 | |
| Ground current | IGND | 12 | 20 | mA | IOUT = 1A, VIN = VOUT+1V | 4 | |
| Current limit | IOUT (lim) | 1.8 | 2.5 | µA | VOUT = 0V, VIN = VOUT+1V | 4 | |
| Enable input current | IEN | 1 | 75 | µA | VEN=2.25V | 4 | |
| Enable input current | IEN | 2 | 4 | µA | VEN=0.8V | 4 | |
| Enable input voltage, logic low (off) | VEN | 0.8 | V | Logic Low (off) | 4 | ||
| Enable input voltage, logic high (on) | VEN | 2.25 | V | Logic High (on) | 4 | ||
| Output leakage current | IFLG (leak) | 0.01 | 2 | µA | VOH = 16V | 4 | |
| Flag output low voltage | VFLG (do) | 240 | 400 | mV | VIN = 0.9 x VOUT (Nominal), IOL= 250µA | 4 | |
| Dropout voltage | VDO | 275 | mV | IOUT = 500mA, VOUT = -1% | 4 | ||
| Ground current | IGND | 700 | µA | IOUT = 100mA, VIN = VOUT+1V | 4 | ||
| Ground current | IGND | 4 | mA | IOUT = 500mA, VIN = VOUT+1V | 4 | ||
| Ground current | IGND | 7 | mA | IOUT = 750mA, VIN = VOUT+1V | 4 | ||
| Turn-on time | tON | 1.3 | 5 | ms | 4 | ||
| Low voltage threshold of flag | VFLG | 93 | % | 4 | |||
| High voltage threshold of flag | VFLG | 99.2 | % | 4 | |||
| Flag hysteresis | VFLG | 1 | 4 | ||||
| Package thermal resistance, junction-to-case | θJC | 15 | ℃/W | SOT-223 | 4 |
CAD (KiCad official)
- Symbol:
MIC39100MP-5.0 - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223 (KiCad packages3D, STEP)
- 3D model files:
mic39100mp-5-0-etched.step/mic39100mp-5-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic39100mp-5-0.step/mic39100mp-5-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (12 pp, sha256
384e64a81b0a355d, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).