component
MIC39100MP-3.3
Public Made by Adomby adom
HGSEMI Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
MIC39100MP-3.3
HGSEMI · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223
MIC39100MP-3.3 from HGSEMI, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Supply input; recommended operating range is +2.25V to +16V (absolute maximum ±20V), with a 1µF or greater input capacitor recommended if far from bulk supply capacitance. |
| 2 | GND | power_in | Ground pin, connected internally to the TAB. |
| 3 | OUT | power_out | Regulator output (fixed 3.3V for this variant), delivering 1A minimum guaranteed and needing an output capacitor (10µF or greater with ESR below 2Ω) for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOT-223 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VIN | -20 | 20 | V | 3 | ||
| Enable voltage (absolute maximum) | VEN | 20 | V | 3 | |||
| Storage temperature | TSTG | -65 | 150 | ℃ | 3 | ||
| Lead temperature (soldering, 5 sec.) | 260 | ℃ | 3 | ||||
| Supply voltage (recommended operating) | VIN | 2.25 | 16 | V | 4 | ||
| Enable voltage (recommended operating) | VEN | 2.25 | 16 | V | 4 | ||
| Junction temperature (recommended operating) | TJ | -40 | 125 | ℃ | 4 | ||
| Output voltage accuracy | VOUT | -1 | 1 | % | 10mA | 4 | |
| Output voltage accuracy | VOUT | -2 | 2 | % | 10mA ≤ IOUT ≤ 1A, VOUT+1V ≤ VIN ≤ 8V | 4 | |
| Line regulation | LNR | 0.06 | 0.5 | % | IOUT = 10mA, VOUT+1V ≤ VIN ≤ 16V | 4 | |
| Load regulation | LDR | 0.2 | 1 | % | VIN = VOUT+1V, 10mA ≤ IOUT ≤ 1A | 4 | |
| Output voltage temperature coefficient | VOUT/T | 40 | 100 | ppm/℃ | 4 | ||
| Dropout voltage | VDO | 150 | 250 | mV | IOUT = 100mA, VOUT = -1% | 4 | |
| Dropout voltage | VDO | 275 | mV | IOUT = 500mA, VOUT = -1% | 4 | ||
| Dropout voltage | VDO | 330 | 500 | mV | IOUT=750mA, VOUT = -1% | 4 | |
| Dropout voltage | VDO | 410 | 630 | mV | IOUT = 1A, VOUT = -1% | 4 | |
| Ground current | IGND | 700 | µA | IOUT = 100mA, VIN = VOUT+1V | 4 | ||
| Ground current | IGND | 4 | mA | IOUT = 500mA, VIN = VOUT+1V | 4 | ||
| Ground current | IGND | 7 | mA | IOUT = 750mA, VIN = VOUT+1V | 4 | ||
| Ground current | IGND | 12 | 20 | mA | IOUT = 1A, VIN = VOUT+1V | 4 | |
| Current limit | IOUT (lim) | 1.8 | 2.5 | µA | VOUT = 0V, VIN = VOUT+1V | 4 | |
| Turn-on time | tON | 1.3 | 5 | ms | 4 | ||
| Enable input voltage, logic low (off) | VEN | 0.8 | V | Logic Low (off) | 4 | ||
| Enable input voltage, logic high (on) | VEN | 2.25 | V | Logic High (on) | 4 | ||
| Enable input current | IEN | 1 | 75 | µA | VEN=2.25V | 4 | |
| Enable input current | IEN | 2 | 4 | µA | VEN=0.8V | 4 | |
| Output leakage current (error flag) | IFLG (leak) | 0.01 | 2 | µA | VOH = 16V | 4 | |
| Output low voltage (error flag) | VFLG (do) | 240 | 400 | mV | VIN = 0.9 x VOUT (Nominal), IOL= 250µA | 4 | |
| Low threshold | VFLG | 93 | % | 4 | |||
| High threshold | VFLG | 99.2 | % | 4 | |||
| Thermal resistance, junction-to-case, SOT-223 | θJC | 15 | ℃/W | 4 | |||
| Hysteresis (error flag) | 1 | 4 |
CAD (KiCad official)
- Symbol:
MIC39100MP-3.3 - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223 (KiCad packages3D, STEP)
- 3D model files:
mic39100mp-3-3-etched.step/mic39100mp-3-3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic39100mp-3-3.step/mic39100mp-3-3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (11 pp, sha256
9f998dfd262b1456, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MIC39100MP-3.3
**HGSEMI** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223
MIC39100MP-3.3 from HGSEMI, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Supply input; recommended operating range is +2.25V to +16V (absolute maximum ±20V), with a 1µF or greater input capacitor recommended if far from bulk supply capacitance. |
| 2 | GND | power_in | Ground pin, connected internally to the TAB. |
| 3 | OUT | power_out | Regulator output (fixed 3.3V for this variant), delivering 1A minimum guaranteed and needing an output capacitor (10µF or greater with ESR below 2Ω) for stability. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOT-223 |
| Category | Power Management (PMIC) |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VIN | -20 | | 20 | V | | 3 |
| Enable voltage (absolute maximum) | VEN | | | 20 | V | | 3 |
| Storage temperature | TSTG | -65 | | 150 | ℃ | | 3 |
| Lead temperature (soldering, 5 sec.) | | | | 260 | ℃ | | 3 |
| Supply voltage (recommended operating) | VIN | 2.25 | | 16 | V | | 4 |
| Enable voltage (recommended operating) | VEN | 2.25 | | 16 | V | | 4 |
| Junction temperature (recommended operating) | TJ | -40 | | 125 | ℃ | | 4 |
| Output voltage accuracy | VOUT | -1 | | 1 | % | 10mA | 4 |
| Output voltage accuracy | VOUT | -2 | | 2 | % | 10mA ≤ IOUT ≤ 1A, VOUT+1V ≤ VIN ≤ 8V | 4 |
| Line regulation | LNR | | 0.06 | 0.5 | % | IOUT = 10mA, VOUT+1V ≤ VIN ≤ 16V | 4 |
| Load regulation | LDR | | 0.2 | 1 | % | VIN = VOUT+1V, 10mA ≤ IOUT ≤ 1A | 4 |
| Output voltage temperature coefficient | VOUT/T | | 40 | 100 | ppm/℃ | | 4 |
| Dropout voltage | VDO | | 150 | 250 | mV | IOUT = 100mA, VOUT = -1% | 4 |
| Dropout voltage | VDO | | 275 | | mV | IOUT = 500mA, VOUT = -1% | 4 |
| Dropout voltage | VDO | | 330 | 500 | mV | IOUT=750mA, VOUT = -1% | 4 |
| Dropout voltage | VDO | | 410 | 630 | mV | IOUT = 1A, VOUT = -1% | 4 |
| Ground current | IGND | | 700 | | µA | IOUT = 100mA, VIN = VOUT+1V | 4 |
| Ground current | IGND | | 4 | | mA | IOUT = 500mA, VIN = VOUT+1V | 4 |
| Ground current | IGND | | 7 | | mA | IOUT = 750mA, VIN = VOUT+1V | 4 |
| Ground current | IGND | | 12 | 20 | mA | IOUT = 1A, VIN = VOUT+1V | 4 |
| Current limit | IOUT (lim) | 1.8 | | 2.5 | µA | VOUT = 0V, VIN = VOUT+1V | 4 |
| Turn-on time | tON | | 1.3 | 5 | ms | | 4 |
| Enable input voltage, logic low (off) | VEN | | | 0.8 | V | Logic Low (off) | 4 |
| Enable input voltage, logic high (on) | VEN | 2.25 | | | V | Logic High (on) | 4 |
| Enable input current | IEN | | 1 | 75 | µA | VEN=2.25V | 4 |
| Enable input current | IEN | | 2 | 4 | µA | VEN=0.8V | 4 |
| Output leakage current (error flag) | IFLG (leak) | | 0.01 | 2 | µA | VOH = 16V | 4 |
| Output low voltage (error flag) | VFLG (do) | | 240 | 400 | mV | VIN = 0.9 x VOUT (Nominal), IOL= 250µA | 4 |
| Low threshold | VFLG | | 93 | | % | | 4 |
| High threshold | VFLG | | 99.2 | | % | | 4 |
| Thermal resistance, junction-to-case, SOT-223 | θJC | | 15 | | ℃/W | | 4 |
| Hysteresis (error flag) | | | 1 | | | | 4 |
## CAD (KiCad official)
- Symbol: `MIC39100MP-3.3`
- Footprint: `Package_TO_SOT_SMD:SOT-223-3_TabPin2`
- 3D model: SOT-223 (KiCad packages3D, STEP)
- 3D model files: `mic39100mp-3-3-etched.step` / `mic39100mp-3-3-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mic39100mp-3-3.step` / `mic39100mp-3-3.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603128849538564096) (11 pp, sha256 `9f998dfd262b1456`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mic39100mp-3-3-datasheet.pdf)